150 Most Recent Posts

Thread AuthorPostersPost AuthorForumThread/Post Link
14TG514TGHarley Tri GlideInstalled Genuine HD Armrest kit
14TG5Papa ZookHarley Tri GlideInstalled Genuine HD Armrest kit
AriNV6Papa ZookRider Safety Discuss...Maybe silly but serious question, s...
AriNV6AriNVRider Safety Discuss...Maybe silly but serious question, s...
AriNV6pawsRider Safety Discuss...Maybe silly but serious question, s...
B SMITH10rhino 2Harley Tri GlideTrailering Tri Glide
B SMITH10DK Custom ProductsHarley Tri GlideTrailering Tri Glide
AriNV6Pegasus1300Rider Safety Discuss...Maybe silly but serious question, s...
AriNV6cycle7447Rider Safety Discuss...Maybe silly but serious question, s...
TomyJ16TomyJHome Built TrikesRebel RT
scaldedchevy2scaldedchevyLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
AriNV13Jack KlarichNew Member Introduct...New to trike
steelpony55553Jack KlarichDetailingCeramic coating
AriNV6Jack KlarichRider Safety Discuss...Maybe silly but serious question, s...
JTJersey4Jack KlarichHarley Freewheeler /...Removing Trim Around Oil Cooler
AriNV6AriNVRider Safety Discuss...Maybe silly but serious question, s...
AriNV6cycle7447Rider Safety Discuss...Maybe silly but serious question, s...
AriNV6AriNVRider Safety Discuss...Maybe silly but serious question, s...
steelpony55553AriNVDetailingCeramic coating
AriNV13AriNVNew Member Introduct...New to trike
JTJersey4Old Road DogHarley Freewheeler /...Removing Trim Around Oil Cooler
paid4c49VulcanscottHonda TrikesService for differential on a Motor...
DK Custom Products362New Orleans KevinHarley Tri GlideWhat did you do to Your Tri-Glide T...
AriNV13Pegasus1300New Member Introduct...New to trike
Jarhead17752GorillaHarley Freewheeler /...paint job
New Orleans Kevin5New Orleans KevinHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
TomyJ8Jack KlarichSidecar ForumHackHer
JTJersey4Jack KlarichHarley Freewheeler /...Removing Trim Around Oil Cooler
AriNV4Jack KlarichCan Am Spyder Trike...I'm a total newbie ... Is the Spyde...
ISP-FL2ISP-FLThe Knife EnthusiestBenchmade Warranty
woody13Rmitchell55Maggie Valley Gather...Maggie Valley 2024
New Orleans Kevin5ISP-FLHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
woody13Marc HMaggie Valley Gather...Maggie Valley 2024
woody13Marc HMaggie Valley Gather...Maggie Valley 2024
woody13PosseRiderMaggie Valley Gather...Maggie Valley 2024
ctdair7ctdairHarley Tri GlideHot Rotors After New Pads
New Orleans Kevin5NotgrownupHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
New Orleans Kevin5PanheadSteveHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
Donnimac3DonnimacHonda TrikesLehman Monarch II
Donnimac3DonnimacHonda TrikesLehman Monarch II
ken g9rhino 2Harley Tri Glidereverse not working
New Orleans Kevin5New Orleans KevinHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
ken g9520fdHarley Tri Glidereverse not working
520fd1520fdFor Sale & WTB C...FS: Trike Mid-Step
JTJersey4JTJerseyHarley Freewheeler /...Removing Trim Around Oil Cooler
JTJersey4rhino 2Harley Freewheeler /...Removing Trim Around Oil Cooler
myhonda614TGHarley Tri GlideKuryakyn filler pad
JTJersey4JTJerseyHarley Freewheeler /...Removing Trim Around Oil Cooler
ken g9ken gHarley Tri Glidereverse not working
JTJersey4rhino 2Harley Freewheeler /...Removing Trim Around Oil Cooler
JTJersey4JTJerseyHarley Freewheeler /...Removing Trim Around Oil Cooler
myhonda6Rogue1Harley Tri GlideKuryakyn filler pad
myhonda614TGHarley Tri GlideKuryakyn filler pad
AriNV4AriNVCan Am Spyder Trike...I'm a total newbie ... Is the Spyde...
TFNC12AriNVNew Member Introduct...Just saying hello
Jarhead17752Jarhead1775Harley Freewheeler /...paint job
AriNV13AriNVNew Member Introduct...New to trike
AriNV13AriNVNew Member Introduct...New to trike
myhonda6Rogue1Harley Tri GlideKuryakyn filler pad
woody13woodyMaggie Valley Gather...Maggie Valley 2024
myhonda6NotgrownupHarley Tri GlideKuryakyn filler pad
New Orleans Kevin5NotgrownupHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
Donnimac3MickHonda TrikesLehman Monarch II
Gernerwa9trike ladyNew Member Introduct...New Member from Bellingham, WA
myhonda6Rmitchell55Harley Tri GlideKuryakyn filler pad
Gernerwa9GorillaNew Member Introduct...New Member from Bellingham, WA
Yannick24GorillaVW Powered TrikesWil-Mac trike kit
woody13Marc HMaggie Valley Gather...Maggie Valley 2024
Donnimac3GorillaHonda TrikesLehman Monarch II
Gernerwa9rhino 2New Member Introduct...New Member from Bellingham, WA
Gernerwa9Marc HNew Member Introduct...New Member from Bellingham, WA
Gernerwa9Uncle FesterNew Member Introduct...New Member from Bellingham, WA
MDO100ZammyHarley Freewheeler /...What Did You Do To Your Freewheeler...
Gernerwa9ZammyNew Member Introduct...New Member from Bellingham, WA
AriNV13Phu CatNew Member Introduct...New to trike
New Orleans Kevin5New Orleans KevinHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
Jjhooker22DeathBySnuSnuVW Powered TrikesSide shifter assembly for 1980 WilM...
Rodnok12ol' schoolNew Member Introduct...Hello Honda Trike owners!
AriNV13ol' schoolNew Member Introduct...New to trike
TFNC12ol' schoolNew Member Introduct...Just saying hello
AriNV13hardwickbvNew Member Introduct...New to trike
whiskeyneat10ol' schoolNew Member Introduct...Howdy"
Gernerwa9hardwickbvNew Member Introduct...New Member from Bellingham, WA
Gernerwa9ol' schoolNew Member Introduct...New Member from Bellingham, WA
scaldedchevy2MickLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
Jjhooker22Jjhooker2VW Powered TrikesSide shifter assembly for 1980 WilM...
Jack Klarich2TomyJTires, Wheels, Brake...Motorcycle Tire Reference
New Orleans Kevin5JTJerseyHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
Jjhooker22DeathBySnuSnuVW Powered TrikesSide shifter assembly for 1980 WilM...
Gernerwa9GernerwaNew Member Introduct...New Member from Bellingham, WA
New Orleans Kevin5New Orleans KevinHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
scaldedchevy2scaldedchevyLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
scaldedchevy2scaldedchevyLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
scaldedchevy2MickLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
ken g9OLBLUHarley Tri Glidereverse not working
Jjhooker22Jjhooker2VW Powered TrikesSide shifter assembly for 1980 WilM...
Yannick24Jjhooker2VW Powered TrikesWil-Mac trike kit
Yannick24Jjhooker2VW Powered TrikesWil-Mac trike kit
myhonda6SeaweedHarley Tri GlideKuryakyn filler pad
Donnimac3DonnimacHonda TrikesLehman Monarch II
ken g9rhino 2Harley Tri Glidereverse not working
BigN692GorillaEnabled TrikersFull length floorboards
woody13Marc HMaggie Valley Gather...Maggie Valley 2024
14TG514TGHarley Tri GlideInstalled Genuine HD Armrest kit
14TG514TGHarley Tri GlideInstalled Genuine HD Armrest kit
14TG514TGHarley Tri GlideInstalled Genuine HD Armrest kit
B SMITH10rhino 2Harley Tri GlideTrailering Tri Glide
B SMITH10CasperHarley Tri GlideTrailering Tri Glide
Seaweed6DCR2013Harley Tri GlideLower Fairing Vents
myhonda6myhondaHarley Tri GlideKuryakyn filler pad
14TG5SeaweedHarley Tri GlideInstalled Genuine HD Armrest kit
Seaweed6SeaweedHarley Tri GlideLower Fairing Vents
14TG5TrampasHarley Tri GlideInstalled Genuine HD Armrest kit
scaldedchevy2scaldedchevyLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
14TG5Papa ZookHarley Tri GlideInstalled Genuine HD Armrest kit
14TG514TGHarley Tri GlideInstalled Genuine HD Armrest kit
BigN692BigN69Enabled TrikersFull length floorboards
TomyJ8TomyJSidecar ForumHackHer
Sully11cScjhbBBQ, Grilling, Cooki...One Has To Go ???
MDO1001dn5upHarley Freewheeler /...What Did You Do To Your Freewheeler...
Seaweed6DK Custom ProductsHarley Tri GlideLower Fairing Vents
14TG5New Orleans KevinHarley Tri GlideInstalled Genuine HD Armrest kit
MDO100Noodles107Harley Freewheeler /...What Did You Do To Your Freewheeler...
msocko354SullyBBQ, Grilling, Cooki...A Little Outdoor Cooking
Papa Zook1451dn5upThe Gun EnthusiastGun Owners
woody13Smitty901Maggie Valley Gather...Maggie Valley 2024
14TG514TGHarley Tri GlideInstalled Genuine HD Armrest kit
Wingrider554BurnerboyRoadsmith Trikes
...
Speed Bleeders
woody13Motorcycle MikeMaggie Valley Gather...Maggie Valley 2024
Papa Zook145ZammyThe Gun EnthusiastGun Owners
woody13jjvwMaggie Valley Gather...Maggie Valley 2024
Seaweed6David792Harley Tri GlideLower Fairing Vents
Seaweed6SeaweedHarley Tri GlideLower Fairing Vents
Sunman7SunmanHarley Freewheeler /...Value of 2015 Freewheeler
Seaweed6SeaweedHarley Tri GlideLower Fairing Vents
Seaweed6OLBLUHarley Tri GlideLower Fairing Vents
Seaweed6SeaweedHarley Tri GlideLower Fairing Vents
AriNV2AriNVOther Rallies & ...Any Nevada trikers' association
woody13PosseRiderMaggie Valley Gather...Maggie Valley 2024
AriNV2evermillOther Rallies & ...Any Nevada trikers' association
AriNV13AriNVNew Member Introduct...New to trike
Papa Zook96SullyBBQ, Grilling, Cooki...Whats for supper?
AriNV131dn5upNew Member Introduct...New to trike
AriNV13SullyNew Member Introduct...New to trike
Burnerboy4BurnerboyRoadsmith Trikes
...
Too Pa Pa Zook
Burnerboy4BurnerboyRoadsmith Trikes
...
Too Pa Pa Zook
Grandpot9Jack KlarichHonda TrikesFront tire?
DK Custom Products3621dn5upHarley Tri GlideWhat did you do to Your Tri-Glide T...
Sully11woodyBBQ, Grilling, Cooki...One Has To Go ???
DK Custom Products362Jack KlarichHarley Tri GlideWhat did you do to Your Tri-Glide T...
Likes Likes:  377
Thanks Thanks:  59
Page 16 of 21 FirstFirst ... 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 LastLast
Results 301 to 320 of 419

Thread: Ongoing 2019 Tri Glide Build-Out w/ lots of photos, videos and observations

  1. #301
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,130
    Thanks
    1
    Thanked 1 Time in 1 Post

    Default

    Quote Originally Posted by Trampas View Post
    Sorry to hear that the saddleman seat cover didn't work out for you, sounded promising, glad Mary found the seat cover, what ever works just keep doing that and sounds like the trash bag is the key, may not look the best but it works

    All for now Trampas
    Yep! There's a trash bag on it right now.

    Kevin
    www.DKCustom.com
    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  2. #302
    13500+ Posts FuzzyWuzHe's Avatar
    Join Date
    Dec 2014
    Location
    Grand Junction, Co. USA
    Posts
    13,243
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by DK Custom Products View Post
    Mary now has about 2,000 miles riding with the new FB16's (Passenger Floorboard Relocators).

    She says these are one of the best mods I've done to the Trike for her.

    Gets her feet/legs further away from the heat, and most importantly gets her thighs OFF of the grab handles.

    Always makes me when I can do something that makes the ride better for her!

    Kevin
    Happy wife ... happy life ...

  3. #303
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,130
    Thanks
    1
    Thanked 1 Time in 1 Post

    Default

    Quote Originally Posted by FuzzyWuzHe View Post
    Happy wife ... happy life ...
    Lotta truth to that!

    Kevin
    www.DKCustom.com
    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  4. #304
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,130
    Thanks
    1
    Thanked 1 Time in 1 Post

    Default

    Dwayne's been waiting on me. Finally got the voice-over done.



    Kevin
    www.DKCustom.com
    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  5. #305
    1250+ Posts
    Gold Club Member
    ultrafxr's Avatar
    Join Date
    Aug 2017
    Location
    Lakeland, TN
    Posts
    1,447
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Default

    Great video on the shocks Kevin. I can see the amount of effort all you guys have put into the videos. Very professional and the graphics aid greatly in communicating your ideas.

  6. DKCustoms postbit
  7. #306
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,130
    Thanks
    1
    Thanked 1 Time in 1 Post

    Default

    Quote Originally Posted by ultrafxr View Post
    Great video on the shocks Kevin. I can see the amount of effort all you guys have put into the videos. Very professional and the graphics aid greatly in communicating your ideas.
    Thank you!

    Kevin
    www.DKCustom.com
    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  8. #307
    30+ Posts
    Join Date
    Aug 2019
    Location
    Salem
    Posts
    33
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Kevin - New to this site, but not to trikes. I have been glued to this thread for over an hour now. Great info, wonderful videos. Love the mods you have done. I have the same Tri Glide, 2019 with same paint scheme. Please don't be offended if I steal some of your ideas and pass them off as my own...lol.

    Mark

  9. #308
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,130
    Thanks
    1
    Thanked 1 Time in 1 Post

    Default

    Quote Originally Posted by Ruby2019 View Post
    Kevin - New to this site, but not to trikes. I have been glued to this thread for over an hour now. Great info, wonderful videos. Love the mods you have done. I have the same Tri Glide, 2019 with same paint scheme. Please don't be offended if I steal some of your ideas and pass them off as my own...lol.

    Mark
    Hi Mark,

    Welcome to the site & Congrats on your 2019 TG. Glad to hear you're liking some of what we've done to ours. Appropriate all you want...just on the DK stuff, send them our way!

    Kevin
    www.DKCustom.com
    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  10. #309
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,130
    Thanks
    1
    Thanked 1 Time in 1 Post

    Default

    I've mentioned it in another post, but want to update this thread with the info.

    As previously mentioned in this thread, my Tri Glide was built*in November of 2018.* It does not have the primary vent.

    I recently discovered I am getting transmission oil migrating to the primary in excess of 6 ounces.* (below 6 ounces HD says is "normal")

    So I will be taking it in for the warranty installation of the primary vent.*

    Everyone I've spoken to that has had this done has seen it solve the oil migration issue.* So I am expecting the same.

    Kevin
    www.DKCustom.com
    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  11. #310
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,130
    Thanks
    1
    Thanked 1 Time in 1 Post

    Default

    Here's a video from when I installed the 606 HiFlow A/C, with a Premium Discrete Breather System, on this TG.



    Kevin
    www.DKCustom.com
    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  12. #311
    600+ Posts ISP-FL's Avatar
    Join Date
    Mar 2017
    Location
    Lake Suzy, FL USA
    Posts
    635
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default

    Kevin, when you said your oil migration was "above 6 ounces", are you talking about that much loss from the tranny in 1,000 miles?

    As you know I am starting to monitor mine for this issue. I might as well keep track on exactly how much I think it is transferring in how many miles as I go along.
    Current: 2019 Trike (custom 130ci T-Man kit with Darkhorse bottom end)

  13. #312
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,130
    Thanks
    1
    Thanked 1 Time in 1 Post

    Default

    Quote Originally Posted by ISP-FL View Post
    Kevin, when you said your oil migration was "above 6 ounces", are you talking about that much loss from the tranny in 1,000 miles?

    As you know I am starting to monitor mine for this issue. I might as well keep track on exactly how much I think it is transferring in how many miles as I go along.
    Yes, 6 ounce or more that migrate from the transmission to the primary...that is the threshold that Harley has set for warranty installation of the Primary Vent.

    If it has less than 6 ounce of migration, that is "normal"/"acceptable" (ROFLMAO) and does not warrant a Primary Vent.

    I am not sure of the miles...don't remember that part of the bulletin.

    Unfortunately, the Dealership has to verify that there is oil migration for Warranty installation of the Primary Vent. This is why I have not had mine done yet.

    I need to take it in. They put in the fluids. Then I have to ride X number of miles, then take it back in, and they check again...only then can they do the warranty installation.

    Kevin
    www.DKCustom.com
    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  14. #313
    1000+ Posts
    Join Date
    Aug 2016
    Location
    Des Moines IA US
    Posts
    1,025
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by DK Custom Products View Post
    Yes, 6 ounce or more that migrate from the transmission to the primary...that is the threshold that Harley has set for warranty installation of the Primary Vent.

    If it has less than 6 ounce of migration, that is "normal"/"acceptable" (ROFLMAO) and does not warrant a Primary Vent.

    I am not sure of the miles...don't remember that part of the bulletin.

    Unfortunately, the Dealership has to verify that there is oil migration for Warranty installation of the Primary Vent. This is why I have not had mine done yet.

    I need to take it in. They put in the fluids. Then I have to ride X number of miles, then take it back in, and they check again...only then can they do the warranty installation.

    Kevin
    If less than 6 ounces is bull crap, should never lose anything, with all the bikes I have had never lost a drop, stayed the same until I decided to change it. Damm harley is trying to BS and not do it, if that is the case why does the 2020 models all have the vent, they know they have a problem and just don't want to fix it unless they have to, no wonder harley isn't doing as good as it used to be, my take only.

    All for now Trampas

    P.S. with all the changes you have done to your trike hope they don't screw you and say not covered because of your changes you have made to your trike, just saying, I know the changes you have done helps the bike but harley has a different mind set

  15. #314
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,130
    Thanks
    1
    Thanked 1 Time in 1 Post

    Default

    Quote Originally Posted by Trampas View Post
    If less than 6 ounces is bull crap, should never lose anything, with all the bikes I have had never lost a drop, stayed the same until I decided to change it. Damm harley is trying to BS and not do it, if that is the case why does the 2020 models all have the vent, they know they have a problem and just don't want to fix it unless they have to, no wonder harley isn't doing as good as it used to be, my take only.

    All for now Trampas

    P.S. with all the changes you have done to your trike hope they don't screw you and say not covered because of your changes you have made to your trike, just saying, I know the changes you have done helps the bike but harley has a different mind set
    Yep, HD has a LONG track record of changing tolerances/specs when issues arise. lol Probably one of the most significant was to change crankshaft runout tolerances on the Twin Cams when they were having trouble with the cranks shifting.

    Not worried about warranty. Everything I've done is easily reversed back to stock, if need be.

    Kevin
    www.DKCustom.com
    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  16. #315
    600+ Posts ISP-FL's Avatar
    Join Date
    Mar 2017
    Location
    Lake Suzy, FL USA
    Posts
    635
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default

    I guess if I find my oil migration is 6 ounces or more within 800 to 1,000 miles I will bring it up to a dealer and have them start a warranty process/claim.

    As far as them denying any factory warranty on mine possibly because I have aftermarket slip-ons and a different air cleaner, I will just ask the service manager when I initiate the process. He/she shouldn't have a problem telling me if I should put the original parts back on during the testing period and installation of the vent.

    I could return it to original in about 45 minutes. Kevin, yours may take a little longer?
    Current: 2019 Trike (custom 130ci T-Man kit with Darkhorse bottom end)

  17. DKCustoms postbit
  18. #316
    70+ Posts
    Join Date
    Oct 2014
    Location
    kearney mo.
    Posts
    77
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default ongoing

    If you don't lose more than 6 oz they won't do the vent? I guess it would be less problem just to buy the vent kit and do it yourself, 49.00 for the kit. I will probably do it my self just to avoid the dealer hassel.

  19. #317
    1250+ Posts
    Gold Club Member
    ultrafxr's Avatar
    Join Date
    Aug 2017
    Location
    Lakeland, TN
    Posts
    1,447
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Default

    So far I've had no migration and I've checked it several times. Last two times I've changed the primary fluid I measured what came out and both times it was dead on 32 oz. And checking the tranny dipstick the fluid level is right where it should be.

    But my factory warranty expires in mid September and I wonder if I should develop the migration at a later date if Harley would honor a warranty claim to install the vent. Or if ESP would cover it. Inquiring minds want to know, lol.

  20. #318
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,130
    Thanks
    1
    Thanked 1 Time in 1 Post

    Default

    Quote Originally Posted by ISP-FL View Post
    I guess if I find my oil migration is 6 ounces or more within 800 to 1,000 miles I will bring it up to a dealer and have them start a warranty process/claim.

    As far as them denying any factory warranty on mine possibly because I have aftermarket slip-ons and a different air cleaner, I will just ask the service manager when I initiate the process. He/she shouldn't have a problem telling me if I should put the original parts back on during the testing period and installation of the vent.

    I could return it to original in about 45 minutes. Kevin, yours may take a little longer?
    Yes, maybe about 1 hour.

    For Warranty purposes on a 2017 - Up, what automatically gets reported to the mothership is if there is a NON-EPA approved tune. Everything else is at the discretion of the Dealership, UNLESS there happens to be a roving HD area manager on site when your bike is there...They can then see visual changes (A/C, exhaust, etc.) that the digital technician does not see. If they do, good chance they will report it.

    Quote Originally Posted by ultrafxr View Post
    So far I've had no migration and I've checked it several times. Last two times I've changed the primary fluid I measured what came out and both times it was dead on 32 oz. And checking the tranny dipstick the fluid level is right where it should be.

    But my factory warranty expires in mid September and I wonder if I should develop the migration at a later date if Harley would honor a warranty claim to install the vent. Or if ESP would cover it. Inquiring minds want to know, lol.
    Good question. It seems it would, but I would take a look at the ESP fine print to see if it were excluded.

    I think it is $249 to have the Dealership install it. If you purchase the kit yourself, and install it yourself, I believe the cost of the Primary Vent kit is only $49

    Kevin
    www.DKCustom.com
    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  21. #319
    13500+ Posts FuzzyWuzHe's Avatar
    Join Date
    Dec 2014
    Location
    Grand Junction, Co. USA
    Posts
    13,243
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by DK Custom Products View Post
    Yes, maybe about 1 hour.

    For Warranty purposes on a 2017 - Up, what automatically gets reported to the mothership is if there is a NON-EPA approved tune. Everything else is at the discretion of the Dealership, UNLESS there happens to be a roving HD area manager on site when your bike is there...They can then see visual changes (A/C, exhaust, etc.) that the digital technician does not see. If they do, good chance they will report it.

    Good question. It seems it would, but I would take a look at the ESP fine print to see if it were excluded.

    I think it is $249 to have the Dealership install it. If you purchase the kit yourself, and install it yourself, I believe the cost of the Primary Vent kit is only $49

    Kevin
    You do it yourself ... they won't warrantee the kit

    I would just transfer the fluid manually .. syringe

  22. #320
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,130
    Thanks
    1
    Thanked 1 Time in 1 Post

    Default

    Quote Originally Posted by leonard View Post
    If you don't lose more than 6 oz they won't do the vent? I guess it would be less problem just to buy the vent kit and do it yourself, 49.00 for the kit. I will probably do it my self just to avoid the dealer hassel.
    Yeah, I may do that myself, just to avoid going back and forth to the dealership...save about 3 or 4 100+ mile round trips.

    Quote Originally Posted by FuzzyWuzHe View Post
    You do it yourself ... they won't warrantee the kit

    I would just transfer the fluid manually .. syringe
    I don't know if they're still doing it (probably are), when they fill it for the test they put a seal on the trans fill plug, if it is broken, then they have to start the test over again.

    Dunno if they put some sort of a seal on the primary cover.

    Kevin
    www.DKCustom.com
    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


Page 16 of 21 FirstFirst ... 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 LastLast

Similar Threads

  1. Replies: 165
    Last Post: 03-04-2019, 05:50 PM
  2. DK Custom PROJECT TRI-GLIDE Report w/ Lots of Pics
    By DK Custom Products in forum Harley Tri Glide
    Replies: 251
    Last Post: 03-04-2019, 05:50 PM
  3. Ride Report Out to the Smokys - Lots of Photos
    By DK Custom Products in forum Trike Travel
    Replies: 37
    Last Post: 07-06-2017, 01:06 PM
  4. First Road Trip on 2014 Tri-Glide...lots of pics
    By DK Custom Products in forum Trike Travel
    Replies: 9
    Last Post: 08-11-2014, 10:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •