Originally Posted by
MR TRIKE
Hello- Looks to me you have no cone shaped spring, plus no shifter bushing and it looks like shifter box was welded on wrong. If you put a straight on face of shifter box it should be parallel with shifter tube. You need to get spring, nylon bushing and heat up bracket that holds shifter box and bend till shaft and shifter box are aligned. To install shifter bushing, you have to remove shifter shaft and remove coupler at trany end, install bushing in shifter box, lube and re- install shaft. If you do what i say, it will work fine. "KEEP-ON-TRIKEN" Dick