I'm at the 2" mark for normal riding and an inch above the pivot. The 30 degree angles was to show the range of possible motion. The center to center is right at 8.5" when using a bend in the main forks. If you think that the 10" rocker will work better than the 8.5" one will, I can change it real easy at this point. Would rather have it right on paper and then for real in metal, than to have it half-assed to start with.
Point taken and changed.
Thanks for your input.
my bad just looked short..didnt look at your dimmention
. probably ok at 8.5 but if you can go at tad longer without messing the trail ... i would