I found a pair of shocks on Amazon. They came very fast. I got 250mm size. All in all they look good. They claim they can handle 960 pounds or so. You can adjust them with rings, but I don't need them any harder.

All in all they were a little less than an inch too tall so the raised the trike a little.

Before I wasn't able to get any movement when I get on and I'm not a feather. The new ones do give a bit. Riding in town is a lot better, but riding down a brick road was not pleasant.

On the highway the trike didn't rattle as much and was ridable.

Click image for larger version. 

Name:	APC_2221.jpg 
Views:	169 
Size:	842.6 KB 
ID:	76859

A picture of trike with old shocks still on and new one on ground.

The back of the zodiac is easy to remove.

Click image for larger version. 

Name:	APC_2223.jpg 
Views:	162 
Size:	789.6 KB 
ID:	76860

Both shocks installed.

Simple job. I put locktite on all of the screws to ensure they won't shake off.

Next tasks: exhaust from motor is loose and the flex tube is broken from muffler. Also, I checked the oil and there seems to be too much. By time winter gets here, I should have it running good.

Well, here's to keeping the rubber on the road.

I tried to make pictures smaller, but I couldn't do it.

Mary