Hello everyone, I just joined this forum and thought I would share some pictures of my trike that I have been working on for a few years now.When I started this project there was no one making a kit for the roadstar, so I had to have one custom made. Hopefully this is the year that I get to ride it. I had problems when I first put it together with the front end wobbling back and forth at low speeds.I went through the entire front end checked head bearings fork tubes, wheel bearings, new front tire, Custon front wheel, still the same problem.
I was told it was a rake-trail issue so I sent the triple trees to pete at steerite and he put 4 1/2 degrees of rake in them and sent them back to me. I put everthing back together and now I figure that because the bike had sat so long before I had sent the trees off to be done that this is the reason that I believe the clutch plates are now stuck together. Bummer. When the temps come up a little,(no heat in my garage) I plan on taking the clutch apart and putting new friction plates in. HAS ANYONE HERE EVER DONE THIS, FOR I HAVE NOT, ANT INSIGHT WILL BE APPRECIATED. Here you go I hope you Dig it. moonshiner