Nothing is ever easy

[Mykneesbehurtin]

What started out as a simple thing escalated pretty quickly,Pulled the Troy built horse tiller out of the shed of course a flat tire and wouldnt start.So hooked it to the garden tractor and drug it to the front garage,pulled the carb and stripped it then in the carb tank over night.Well to my delight all the 20 plus year old fuel line where deteriorating,got it running great,now for the flat tire.So i pump it up and start to soap it to find the leak,well were isnt it leaking bead on front and back and the big split in the side wall and of course the rim is rusted to the axle so i wrestle the tire off the rim while still on the tiller.Well no one stocks a 4.8x8 AG tread tire in my area,so i had to order oneSo am i the only one who has this kind of luck,as i tell my wife if it wasnt for bad luck i wouldnt have any luck at all.

[Fearless]

What started out as a simple thing escalated pretty quickly,Pulled the Troy built horse tiller out of the shed of course a flat tire and wouldnt start.So hooked it to the garden tractor and drug it to the front garage,pulled the carb and stripped it then in the carb tank over night.Well to my delight all the 20 plus year old fuel line where deteriorating,got it running great,now for the flat tire.So i pump it up and start to soap it to find the leak,well were isnt it leaking bead on front and back and the big split in the side wall and of course the rim is rusted to the axle so i wrestle the tire off the rim while still on the tiller.Well no one stocks a 4.8x8 AG tread tire in my area,so i had to order oneSo am i the only one who has this kind of luck,as i tell my wife if it wasnt for bad luck i wouldnt have any luck at all.

Don't Feel that you are the only one.... sounds like my simple fixes in the garage on a daily basis good luck getting the rim off the axle. Try a little Seafoam Deep kreep believe it or not better than PB Blaster and I never thought I would say that. Fred

[rhino 2]

There isn't nearly a day that gos by that i can't turn an easy job into a hard job...And thats so easy for me to do that i make it look easy.........

[paws]

You are not alone...we all have those days... sometimes you are the dog, sometimes you are the hydrant..

[Ol' Man Jeb]

What started out as a simple thing escalated pretty quickly,Pulled the Troy built horse tiller out of the shed of course a flat tire and wouldnt start.So hooked it to the garden tractor and drug it to the front garage,pulled the carb and stripped it then in the carb tank over night.Well to my delight all the 20 plus year old fuel line where deteriorating,got it running great,now for the flat tire.So i pump it up and start to soap it to find the leak,well were isnt it leaking bead on front and back and the big split in the side wall and of course the rim is rusted to the axle so i wrestle the tire off the rim while still on the tiller.Well no one stocks a 4.8x8 AG tread tire in my area,so i had to order oneSo am i the only one who has this kind of luck,as i tell my wife if it wasnt for bad luck i wouldnt have any luck at all.

Sounds like standard operating procedure to me ! Whats the problem? 😷

[Jack Klarich]

Damn Murphy's Law, Good Luck Steve

[Mykneesbehurtin]

Well crap the plastic gas tank has a crack,used a soldering iron to repair it,well its down to just a small seep so i will try and find a gas tank if not i will try to find a plastic epoxy that will handle gas.

[Fearless]

Well crap the plastic gas tank has a crack,used a soldering iron to repair it,well its down to just a small seep so i will try and find a gas tank if not i will try to find a plastic epoxy that will handle gas.

JB Weld I've Fixed Kerosene heater tanks with it as well as gas tanks just make sure it is degreased and leave the JB Weld cure for 48 hours or so. worked for me. Fred

[Philip R]

Seems like every project that I start turns into a real cluster. Last year I changed 2 pulleys on my rider and installed a new belt. It lasted about 2 uses before one of them bit the dust. Of course the belt is destroyed too. I got one on order. I had to install a starter button on zero-turn.

[FuzzyWuzHe]

Well crap the plastic gas tank has a crack,used a soldering iron to repair it,well its down to just a small seep so i will try and find a gas tank if not i will try to find a plastic epoxy that will handle gas.

A plastic shop can "weld" it ... did that to a camper water tank once, after spending about $150 on "sealers", never leaked again.

[Mykneesbehurtin]

Well good news is i can get a replacement tank..........$345.00I dont think so.

[stacebg]

didnt you know every 1/2 hr job is only 1 broken stud away from an all weekend job??

[Lee H. Mann]

didnt you know every 1/2 hr job is only 1 broken stud away from an all weekend job??

Great quotation....