I discovered by accident when I had the bike idling and the Accuride air compressor came on, the bike raised up. When the compressor stopped the bike lowered back down. I thought something was up because the ride was harsher than normal.
I found the air system connectors behind the right tire (must remove tire) and sprayed soapy water and found that a line at a connector was leaking. I trimmed the line but it still leaked so I had to replace the bad connector .
I also modified the system so I could have a visual when the system was working. Probably an overkill on what I did, but I had an unused volt guage/meter. Also I you have a TPMS system installed you'll have an extra sensor cap.
I have attached a schematic of what I did......
I found the air system connectors behind the right tire (must remove tire) and sprayed soapy water and found that a line at a connector was leaking. I trimmed the line but it still leaked so I had to replace the bad connector .
I also modified the system so I could have a visual when the system was working. Probably an overkill on what I did, but I had an unused volt guage/meter. Also I you have a TPMS system installed you'll have an extra sensor cap.
I have attached a schematic of what I did......
