I recently replaced rear master brake cylinder on my 2007 Ultra Classic Electra Glide with Lehman Renegade rear end. Bike now pulls to right when rear brake applied. Bled lines extensively, still pulls. Can I adjust brakes without pulling wheels?
I recently replaced rear master brake cylinder on my 2007 Ultra Classic Electra Glide with Lehman Renegade rear end. Bike now pulls to right when rear brake applied. Bled lines extensively, still pulls. Can I adjust brakes without pulling wheels?
Jim Murphy
EX-Lehman & Champion Dealer Owner Operator
Iron Butt Rider 2001
WHEN HELP IS OFFERED, A SIMPLE "THANK YOU" IS APPRECIATED.
welcome aboard Herb. Jim is our Lehman expert so keep bleeding the brakes. You got air in there still. Check and make sure your fitting are tight.
Stallion #406 // 2013 Tri-Glide
Welcome to Trike Talk Herb! Jim is our Lehman guru. I'd go with what he says.
"I don't need a map. I still have a road in front of me!"
Welcome to Trike Talk. If your brakes are pulling right, the left rear is where I would look first for air. Good Luck and do check back in
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL
If drum brakes, if not pulling before, likely not adjustment … but do look inside the rear wheels from under rear of trike for any signs of leaking rear axle lube from axle seals. Rear axle lube on brake shoes will cause them to grab, and they are ruined when it happens, no cleaning soaked brake shoes …
Make Courtesy Your "Code of the Road" too!