bought header pipe off e bay with cat removed several months ago. decided to put it on .to long y pipe clamp wont fit . pipe was cut in middle to remove cat , welded back weld makes it 1/4 longer than stock.
bought header pipe off e bay with cat removed several months ago. decided to put it on .to long y pipe clamp wont fit . pipe was cut in middle to remove cat , welded back weld makes it 1/4 longer than stock.
When i was doing these i made a jig to make sure pipe would stay factory length.
If you are talking about where the header makes a left turn to connect to the crossover...have you tried loosening the bolt that holds the crossover in place against the trans? If it is only 1/4" off, you can then use a washer as a spacer (if needed) on the crossover bracket, and your left slip-on has plenty of play, forward & backward, so that is a non-issue.
If I am understanding wrong, post up a photo of where you are having a fitment challenge.
Kevin
Vintage 09' Vivid Black, Boyesen X force intake, DK Customs DIY external breather, PV tuner, Mighty Mite love Jugs,Titanium Wrapped Header pipe, Khrome Werks 2+2 Wide Sweepers, DK 2" tank lift deluxe, Air Deflectors, Rear Bumper, Fender Chrome trim, Kuri. Rear lights, 9" LRS recurve flat top wind screen, LED headlight and spots, Hubcaps rear wheels
thanks for the help kevin. i guess i couldnt see the forest for the trees. started it up today sounds the way it should.raining or would be out.