That looks darn nice, and should last a good long time
Likes: 27
Thanks: 0
RaceDeck garage floor tiles installation
I've been wanting / considering different ways to improve the looks of my garage . . . especially the ugly raw concrete floor. Several years ago I got a quote from a company that did the local Harley dealers service entrance to do an epoxy coating in my garage. But I never acted on it due to cost and the hassle of having to clear everything out for them to put the epoxy down.
Probably like you I've seen the RaceDeck commercials. In fact several years ago I bought from the local Harley dealer a 4' x 8' section of black and orange tiles with the bar and shield logo and I've parked my motorcycles on it. After contacting RaceDeck I learned that they make the H-D version of the tiles . . . and they are quite a bit more costly than the non-H-D version. Surprise, surprise the Harley tax strikes again.
In any case I decided against the H-D version not only due to the cost but just looking down the road thinking I might not want that on my garage floor forever, lol. After due consideration and several consultations with a most helpful sales person / advisor I decided to go for it, spend the bucks and get a new floor.
The tiles came on a pallet . . . all 576 pieces in 12 cartons weighing 552 pounds. Thankfully a $20 bill got the driver to pull the pallet up into my garage rather than leave it curbside which is all that was called for. Nice guy and well worth a little tip.
IMG_0444 by Jerry Rice, on Flickr
IMG_0445 by Jerry Rice, on Flickr
Next step was the unpacking.
IMG_0448 by Jerry Rice, on Flickr
They suggest you put them in the sun to warm up and expand. That was no problem as it was blindly sunny and hot, hot, hot.
IMG_0449 by Jerry Rice, on Flickr
IMG_0450 by Jerry Rice, on Flickr
Now I had read quite a bit about the tiles and installation and several folks recommended putting down landscaping fabric to cut down on possible 'clicking' noise as you walked across the floor. Others said it was a waste of time and money and sound reverberation was not really that big an issue. But I thought 'what the heck' I'm only going to do this once and it couldn't hurt so I put down the landscape fabric prior to installing the tiles.
IMG_0451 by Jerry Rice, on Flickr
IMG_0452 by Jerry Rice, on Flickr
Now the fun begins . . . installing the tiles. I learned they come boxed in a 4' x 4' section - in other words 4, 12" tiles already assembled. If you want to install individual tiles in a checkerboard or other non-repeating pattern you must separate the assembled tiles. I thought the smaller checkerboard looked too 'busy' for my taste so I decided to make a checkerboard pattern using the 4' x 4' assembled tiles. And I choose gray and silver colors (well RaceDeck calls them graphite and alloy) since the match my storage cabinets pretty well. And those storage cabinets were a bear to move and re-position. I mean they are HEAVY. Here is the partially finished floor with one cabinet back in place.
IMG_0453 by Jerry Rice, on Flickr
Almost finished the end is in sight.
IMG_0454 by Jerry Rice, on Flickr
Ah done at last!
IMG_0455 by Jerry Rice, on Flickr
Here it is with all my 'stuff' back in place . . . or at least inside the garage, lol.
IMG_0457 by Jerry Rice, on Flickr
IMG_0458 by Jerry Rice, on Flickr
So what's the verdict? I like it and wish I'd done it sooner. However I'll tell you it's not a simple 2 hour fun job like they show on the commercials. It wasn't really difficult but it was tedious. I found that stomping on the tile seams to get them to lock in place was very tiresome so I resorted to dropping tiles in place for the entire row and sitting down and pounding the tiles into locking using a hard rubber mallet. That worked much better for me.
Should you be interested in purchasing RaceDeck tiles they do offer a military discount and be sure to join 'The Garage Journal Board' online forum as RaceDeck is a sponsor and offers members a discount.
That looks darn nice, and should last a good long time
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL
Nice job Jerry, it looks really nice !!!
2021 CVO TriGlide - Sunset Orange & Black
Life's journey is not to arrive at the grave in a well-preserved body, but to skid in sideways, totally worn out, shouting...Holy Sh!t What a ride!
Jerry.......................
Sometimes a Cigar is Just a Cigar.....
2019 Tri-Glide.......
It looks fantastic, Jerry.
My mission in life is not merely to survive, but to thrive; and to do so with some passion, some compassion, some humor, and some style. – Maya Angelou
Really nice work, Jerry.
Looks good Jerry!!!
"I don't need a map. I still have a road in front of me!"
good job ball park figure on cost and what floor size
Stallion #406 // 2013 Tri-Glide
My garage is 23' wide by 24' deep so a total of 576 sq ft which equals 576 12" x 12" tiles. $1,650 with the 24 edge tiles. Less than the quote I got to epoxy the floor and that was several years ago.Originally Posted by Gorilla
Very nice good job do you hire out LOL . VERY NICE Fred
Vintage 09' Vivid Black, Boyesen X force intake, DK Customs DIY external breather, PV tuner, Mighty Mite love Jugs,Titanium Wrapped Header pipe, Khrome Werks 2+2 Wide Sweepers, DK 2" tank lift deluxe, Air Deflectors, Rear Bumper, Fender Chrome trim, Kuri. Rear lights, 9" LRS recurve flat top wind screen, LED headlight and spots, Hubcaps rear wheels
Thanks Fred. I do work for beer, lol.
Looks very nice.
Retired trike builder
America's first lady trike builder.
WOW ... that is stunning ... great Job.
Just for the record ... puts the "Magic" Garage to shame ...
I look at my garage floor and I look at your pics, awesome, just awesome, good job!
I look at my garage floor and I look at your pics, awesome, just awesome, good job!
40X60 most likely not going to happen I'm thinking paint. Daughter has a friend who I think is or was a graphic tagger who would love to paint the floor with several murals. I just may do that as long I pick content. Fred
Vintage 09' Vivid Black, Boyesen X force intake, DK Customs DIY external breather, PV tuner, Mighty Mite love Jugs,Titanium Wrapped Header pipe, Khrome Werks 2+2 Wide Sweepers, DK 2" tank lift deluxe, Air Deflectors, Rear Bumper, Fender Chrome trim, Kuri. Rear lights, 9" LRS recurve flat top wind screen, LED headlight and spots, Hubcaps rear wheels
So after I completed the garage floor I got to thinking about the 11 x 5 utility room that opens from my garage. Several years ago the Harley dealers had a 4 x 8 section of RaceDeck tiles with the bar and shield logo available - don't know if it still is or not. Anyway I got one and parked my bikes on it for several years. Here is my 2018 TG on it.
IMG_0147 by Jerry Rice, on Flickr
So I thought I'd repurpose it and use it in my utility room. Of course I had to buy a few more tiles (24 in fact) in order to complete the project but I think it turned out rather well.
IMG_0460 by Jerry Rice, on Flickr
All done and I'm through with this project!
Jer,
That garage looks really nice. Great job!
Kevin
Posting Permissions
