Meziere-Reverser-web-ad-90x750-r3 copy

150 Most Recent Posts

Thread AuthorPostersPost AuthorForumThread/Post Link
RedOregon13Papa ZookHarley Tri GlideUpgrades on '24 Triglide?
Bama boy4DragonStallion TrikesStallion fuel pump
Bama boy4DragonStallion TrikesStallion fuel pump
Bama boy4DragonStallion TrikesStallion fuel pump
Papa Zook239SullyNew Member Introduct...What Made You Join TrikeTalk Forum?
RedOregon13RedOregonHarley Tri GlideUpgrades on '24 Triglide?
RedOregon13NotgrownupHarley Tri GlideUpgrades on '24 Triglide?
phillipschuckann7NotgrownupHonda TrikesWho made my trike?
Papa Zook239ol' schoolNew Member Introduct...What Made You Join TrikeTalk Forum?
PKLGW2pawsHonda Trikes2007 gl1800 motor trike
ultrafxr5Papa ZookHarley Tri GlideFinished at last . . . well at leas...
Noodles1072NotgrownupHarley Freewheeler /...Very Nice Gloves
ultrafxr5NotgrownupHarley Tri GlideFinished at last . . . well at leas...
Papa Zook239rhino 2New Member Introduct...What Made You Join TrikeTalk Forum?
PKLGW2PKLGWHonda Trikes2007 gl1800 motor trike
Papa Zook239skisnow806New Member Introduct...What Made You Join TrikeTalk Forum?
Speedy Pete12JTJerseyNew Member Introduct...New member from Alberta, Canada
Just BOB2Just BOBStallion Trikesinfo
ultrafxr5Longbeard71Harley Tri GlideFinished at last . . . well at leas...
ultrafxr5ultrafxrHarley Tri GlideFinished at last . . . well at leas...
ultrafxr5TrampasHarley Tri GlideFinished at last . . . well at leas...
ultrafxr5ultrafxrHarley Tri GlideFinished at last . . . well at leas...
Noodles1072Noodles107Harley Freewheeler /...Very Nice Gloves
Speedy Pete12cycle7447New Member Introduct...New member from Alberta, Canada
RISal24!12cycle7447New Member Introduct...New member..new to trikes
phillipschuckann7Papa ZookHonda TrikesWho made my trike?
RISal24!12ol' schoolNew Member Introduct...New member..new to trikes
Bama boy4Grey_Ghost_27Stallion TrikesStallion fuel pump
phillipschuckann7trike ladyHonda TrikesWho made my trike?
RISal24!12trike ladyNew Member Introduct...New member..new to trikes
Speedy Pete12RustyBNew Member Introduct...New member from Alberta, Canada
RISal24!12Marc HNew Member Introduct...New member..new to trikes
Bowie11RustyBNew Member Introduct...New to trike, old time rider
RISal24!12RustyBNew Member Introduct...New member..new to trikes
RISal24!12rhino 2New Member Introduct...New member..new to trikes
RISal24!12hardwickbvNew Member Introduct...New member..new to trikes
Bowie11hardwickbvNew Member Introduct...New to trike, old time rider
RISal24!12Uncle FesterNew Member Introduct...New member..new to trikes
Bowie11ZammyNew Member Introduct...New to trike, old time rider
RISal24!12SullyNew Member Introduct...New member..new to trikes
RISal24!12ZammyNew Member Introduct...New member..new to trikes
Chief80138520fdHarley Tri GlideHow many miles on your Triglide?
RISal24!12GorillaNew Member Introduct...New member..new to trikes
RISal24!12RISal24!New Member Introduct...New member..new to trikes
woody19woodyHonda Trikes2019 Goldwing CSC
DK Custom Products362NotgrownupHarley Tri GlideWhat did you do to Your Tri-Glide T...
Bouncer10NotgrownupHarley Tri GlideDrive Belt Replacement Time
Bouncer10BouncerHarley Tri GlideDrive Belt Replacement Time
Bouncer10BouncerHarley Tri GlideDrive Belt Replacement Time
phillipschuckann7GorillaHonda TrikesWho made my trike?
rjd637brianlHonda Trikes1989 Honda Goldwing trike opinions
DeathBySnuSnu19GorillaVW Powered TrikesVolkswagen Kit Cars
DK Custom Products362520fdHarley Tri GlideWhat did you do to Your Tri-Glide T...
SHARKDIVER4DK Custom ProductsGeneral Harley Chatsuper shox
phillipschuckann7trike ladyHonda TrikesWho made my trike?
phillipschuckann7ol' schoolHonda TrikesWho made my trike?
phillipschuckann7rhino 2Honda TrikesWho made my trike?
phillipschuckann7phillipschuckannHonda TrikesWho made my trike?
Bowie11Uncle FesterNew Member Introduct...New to trike, old time rider
RedOregon13RedOregonHarley Tri GlideUpgrades on '24 Triglide?
DeathBySnuSnu19DeathBySnuSnuVW Powered TrikesVolkswagen Kit Cars
Bowie11woodyNew Member Introduct...New to trike, old time rider
Just BOB2GorillaStallion Trikesinfo
SHARKDIVER4WindyOneGeneral Harley Chatsuper shox
Bouncer10GorillaHarley Tri GlideDrive Belt Replacement Time
Just BOB2Just BOBStallion Trikesinfo
Chief80138CagmoHarley Tri GlideHow many miles on your Triglide?
PopPop13consitterNew Member Introduct...New Member
TxHarleyRider2Papa ZookHarley Trike Convers...Need help bad with conversion.
PopPop13Pegasus1300New Member Introduct...New Member
Bouncer10NotgrownupHarley Tri GlideDrive Belt Replacement Time
PopPop13ol' schoolNew Member Introduct...New Member
Bowie11ol' schoolNew Member Introduct...New to trike, old time rider
Chief80138DOKKHarley Tri GlideHow many miles on your Triglide?
Bouncer10BouncerHarley Tri GlideDrive Belt Replacement Time
Bowie11trike ladyNew Member Introduct...New to trike, old time rider
Bowie11GorillaNew Member Introduct...New to trike, old time rider
Bowie11rhino 2New Member Introduct...New to trike, old time rider
Bowie11Marc HNew Member Introduct...New to trike, old time rider
SaltBushBill11Marc HNew Member Introduct...New member
Bowie11BowieNew Member Introduct...New to trike, old time rider
Rick Sinacore9RawhidekenHarley Tri GlideTour pack reinforcement
SaltBushBill11Uncle FesterNew Member Introduct...New member
Burnerboy3tommyv333Harley Trike Convers...Hey Bozo (Andrew)
Old Aviator5Old AviatorHonda TrikesGreasing a Motortrike Coupe SA rear...
Old Aviator5Old AviatorHonda TrikesGreasing a Motortrike Coupe SA rear...
Noodles1073JTJerseyHarley Freewheeler /...Tobacco Fade
Noodles1073trike ladyHarley Freewheeler /...Tobacco Fade
Old Aviator5Phu CatHonda TrikesGreasing a Motortrike Coupe SA rear...
SaltBushBill11SullyNew Member Introduct...New member
ronc44242Papa ZookHarley Tri Glidequestion
TxHarleyRider2TxHarleyRiderHarley Trike Convers...Need help bad with conversion.
Chappy KC5StrelnikovFrankensteinFrankenstein Kit
jerry1@iw.net4StrelnikovFrankensteinFrankenstein owners
TxHarleyRider2Papa ZookHarley Trike Convers...Need help bad with conversion.
Skavoola14SkavoolaNew Member Introduct...New to Trike Talk
Old Aviator5GoldWingrGregHonda TrikesGreasing a Motortrike Coupe SA rear...
El Lobo10El LoboHarley Tri GlideBeen away for a while
SaltBushBill11GorillaNew Member Introduct...New member
cissywalton2GorillaCalifornia Sidecar T...how do I change out the reverse bel...
Noodles1073Noodles107Harley Freewheeler /...Tobacco Fade
Old Aviator5Old AviatorHonda TrikesGreasing a Motortrike Coupe SA rear...
SaltBushBill11trike ladyNew Member Introduct...New member
ronc44242ronc4424Harley Tri Glidequestion
Old Aviator5SkavoolaHonda TrikesGreasing a Motortrike Coupe SA rear...
Old Aviator5rhino 2Honda TrikesGreasing a Motortrike Coupe SA rear...
Old Aviator5Old AviatorHonda TrikesGreasing a Motortrike Coupe SA rear...
cissywalton2cissywaltonCalifornia Sidecar T...how do I change out the reverse bel...
Skavoola14PosseRiderNew Member Introduct...New to Trike Talk
Skavoola14woodyNew Member Introduct...New to Trike Talk
PopPop13woodyNew Member Introduct...New Member
Speedy Pete12woodyNew Member Introduct...New member from Alberta, Canada
Vulcanology10woodyNew Member Introduct...New member
SaltBushBill11woodyNew Member Introduct...New member
SaltBushBill11hardwickbvNew Member Introduct...New member
Vulcanology10hardwickbvNew Member Introduct...New member
Speedy Pete12hardwickbvNew Member Introduct...New member from Alberta, Canada
SaltBushBill11rhino 2New Member Introduct...New member
RedOregon13NotgrownupHarley Tri GlideUpgrades on '24 Triglide?
SaltBushBill11ol' schoolNew Member Introduct...New member
Vulcanology10ol' schoolNew Member Introduct...New member
Speedy Pete12ol' schoolNew Member Introduct...New member from Alberta, Canada
D'07ShadowAero6ol' schoolNew Member Introduct...My Older and Dear Friends Gideon! M...
SaltBushBill11scuzziNew Member Introduct...New member
SaltBushBill11SaltBushBillNew Member Introduct...New member
PopPop2Pegasus1300Can Am Spyder Trike...New Member
Vulcanology10GorillaNew Member Introduct...New member
Vulcanology10rhino 2New Member Introduct...New member
Speedy Pete12Marc HNew Member Introduct...New member from Alberta, Canada
Vulcanology10Marc HNew Member Introduct...New member
TxHarleyRider2TxHarleyRiderHarley Trike Convers...Need help bad with conversion.
Speedy Pete12trike ladyNew Member Introduct...New member from Alberta, Canada
rjd637trike ladyHonda Trikes1989 Honda Goldwing trike opinions
DrCrazyTrain13Uncle FesterNew Member Introduct...Introduction
Vulcanology10Uncle FesterNew Member Introduct...New member
Speedy Pete12Uncle FesterNew Member Introduct...New member from Alberta, Canada
Speedy Pete12rhino 2New Member Introduct...New member from Alberta, Canada
Vulcanology10ZammyNew Member Introduct...New member
Speedy Pete12ZammyNew Member Introduct...New member from Alberta, Canada
RedOregon13RKplus10Harley Tri GlideUpgrades on '24 Triglide?
RedOregon13RedOregonHarley Tri GlideUpgrades on '24 Triglide?
SHARKDIVER4DK Custom ProductsGeneral Harley Chatsuper shox
RedOregon13DK Custom ProductsHarley Tri GlideUpgrades on '24 Triglide?
DanTheMan1DanTheManNew Member Introduct...Where Have All The Good Trikes Gone...
RedOregon13ultrafxrHarley Tri GlideUpgrades on '24 Triglide?
RedOregon13David792Harley Tri GlideUpgrades on '24 Triglide?
Rawhideken121dn5upHarley Tri Glide2024 Tri glide
rjd637pawsHonda Trikes1989 Honda Goldwing trike opinions
RedOregon13RedOregonHarley Tri GlideUpgrades on '24 Triglide?
Speedy Pete12Speedy PeteNew Member Introduct...New member from Alberta, Canada
Likes Likes:  17
Thanks Thanks:  1
Page 1 of 2 1 2 LastLast
Results 1 to 20 of 22

Thread: Our First Trike, what is it

  1. #1
    100+ Posts AJ1500's Avatar
    Join Date
    Apr 2014
    Location
    Midway Ga
    Posts
    107
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Our First Trike, what is it

    Hi all

    we just picked up this little gem. I need help identifying it. I can't find anything on the trike anywhere to tell me what make or model it is

    anyone recognize this trike body. Also it has 4 bolt 14" wheels that have a 3" or 76.2MM bolt pattern. I will be looking to replace them but am having trouble finding any this size

    any ideas where I could find the wheels
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	4.jpg 
Views:	116 
Size:	158.3 KB 
ID:	89585  

    Click image for larger version. 

Name:	5.jpg 
Views:	109 
Size:	114.5 KB 
ID:	89586  


  2. #2
    8500+ Posts
    TrikeTalk Moderator
    trike lady's Avatar
    Join Date
    Jun 2008
    Location
    Lovington, NM, U.S.A.
    Posts
    8,715
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Nice trike, looks like a Lehman conversion.
    Retired trike builder
    America's first lady trike builder.

  3. #3
    1250+ Posts CrystalPistol's Avatar
    Join Date
    Apr 2010
    Location
    Shenandoah Valley of Virginia
    Posts
    1,414
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    I know …. a darn nice looking one! To me, I see a lot of Lehman "looks" in it, looked through a Lehman history I have, it says in 1996 the GTL came out, the first to incorporate Honda tail lights (mine's a '98 Lehman GTL kit on a '97 GL1500). So, if correct, looks like a pre '96 Lehman kit, "like '95ish"… the shapes, the tapers from fenders to rear, the shape of the trunk, the "dip" in the top center under the travel trunk, the fender openings too.

    Looks like they hid the trunk hinges and added OEM tail lights and removed the added on tail lights.

    Yep, It all just screams Lehman to me.

    Measure the wheel lug pattern again, … that 3" is way small measuring across the center of the hub (not adjacent, but opposite bolt center to bolt center). I have a pair of those same wheels with tires that came with our kit as standard, but the installer who owned it used the optional 15x7" ASA wheels which then had 245/60-15 Qualifier GT tires. 4 lugs on 4.25" circle (4x4.25").

    Lee H. Mann is his screen name here, he'll know more.

    I did edit your pics to get a better look in the shadows. I threw in a already up loaded picture for you to compare details if you wish. Bumper is just fiberglass, really just holds 6 lights, but this view shows similarities. Looks like the same trunk door almost, slightly remolded with a wider tag recess?
    Attached Images Attached Images      
    Make Courtesy Your "Code of the Road" too!

  4. #4
    100+ Posts AJ1500's Avatar
    Join Date
    Apr 2014
    Location
    Midway Ga
    Posts
    107
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Cool, I have been looking at tons of pictures trying to figure it out and so far had came to the same conclusion. it is on a 96 1500

    I picked this up for my wife to ride to replace the Yamaha with a Voyager kit she is learning on

    right now I have it tore down replacing the tires, timing belts, all fluids and tune up. it's been sitting for a while not being run

    I thought that wheel measurement was a bit crazy. I will remeasure it tonight then I can look for something to replace them

    Thanks for your help

  5. #5
    1250+ Posts CrystalPistol's Avatar
    Join Date
    Apr 2010
    Location
    Shenandoah Valley of Virginia
    Posts
    1,414
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by AJ1500 View Post
    Cool, I have been looking at tons of pictures trying to figure it out and so far had came to the same conclusion. it is on a 96 1500

    I picked this up for my wife to ride to replace the Yamaha with a Voyager kit she is learning on

    right now I have it tore down replacing the tires, timing belts, all fluids and tune up. it's been sitting for a while not being run

    I thought that wheel measurement was a bit crazy. I will remeasure it tonight then I can look for something to replace them

    Thanks for your help
    That was why we bought our's … but then "Wife Unit" got her permit, took some rides, decided she liked Co-riding better so she could just look about more. She loves it, hardly got her back on the 2 wheelers after that.

    If it is 4 bolts on a 4.25" circle, very easy to find wheels. The ASAs above in my pic are on 215/70-15 tires now, when I had them off I found they had the same back space as the 10hole 15x7s on my 1985 Thunderbird, which means most any Ford Pinto or Mustang 4 lug wheels fit which means a wide variety of aftermarket are available. I even picked up another "extra" pair of the same ASA wheels maybe 10 years ago (wish I could still get those "Lemans SR" RWL tires though).

    I know some don't like them, but I do like those fender top racks too. Nice looking Trike there.
    Make Courtesy Your "Code of the Road" too!

  6. #6
    100+ Posts AJ1500's Avatar
    Join Date
    Apr 2014
    Location
    Midway Ga
    Posts
    107
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Thanks

    yeah I have mixed emotions about the racks but my wife likes them and that's all that counts right now. We adding a sidecar on my wing due to her having trouble with knees and back on long trips. She loves the sidecar but has been wanting to learn to ride and have her own bike for a couple years now. I picked up a nice Yamaha Venture with trike kit for her to learn on, she is really liking it so I decided to put her on a real trike.

    Yes I am happy it is in as good a shape as it is, it has some minor damaged on one fender, no cracks just scraped on the side

    my wife is just beside herself waiting to get to take it on it's first ride

    I like the wheels on your trike

  7. #7
    Gone But Not Forgotten
    Tech Contributor
    Lee H. Mann's Avatar
    Join Date
    Apr 2011
    Location
    Martinsburg, WV
    Posts
    4,065
    Thanks
    0
    Thanked 3 Times in 3 Posts

    Cool

    Ace, Welcome to Trike Talk from West Virginia.

    Your trike is a Lehman Commander model made for the GL1500.

    The Commander had 14" wheels B/C 15" wouldn't fit in the wheel wells.

    It has the standard Lehman undercarriage like 'CrystalPistol'.

    The bolt pattern is 4X4 1/4".

    I still have several of those wheels around too.

    Jim
    Last edited by Lee H. Mann; 07-06-2020 at 06:18 PM.
    Jim Murphy
    EX-Lehman & Champion Dealer Owner Operator
    Iron Butt Rider 2001

    WHEN HELP IS OFFERED, A SIMPLE "THANK YOU" IS APPRECIATED.

  8. #8
    Gone But Not Forgotten
    Tech Contributor
    Lee H. Mann's Avatar
    Join Date
    Apr 2011
    Location
    Martinsburg, WV
    Posts
    4,065
    Thanks
    0
    Thanked 3 Times in 3 Posts

    Cool

    CrystalPistol, I have some of those RWL Tires (used) and those ASA wheels too.
    Last edited by Lee H. Mann; 07-06-2020 at 06:26 PM.
    Jim Murphy
    EX-Lehman & Champion Dealer Owner Operator
    Iron Butt Rider 2001

    WHEN HELP IS OFFERED, A SIMPLE "THANK YOU" IS APPRECIATED.

  9. #9
    1250+ Posts CrystalPistol's Avatar
    Join Date
    Apr 2010
    Location
    Shenandoah Valley of Virginia
    Posts
    1,414
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by AJ1500 View Post
    Thanks

    yeah I have mixed emotions about the racks but my wife likes them and that's all that counts right now. We adding a sidecar on my wing due to her having trouble with knees and back on long trips. She loves the sidecar but has been wanting to learn to ride and have her own bike for a couple years now. I picked up a nice Yamaha Venture with trike kit for her to learn on, she is really liking it so I decided to put her on a real trike.

    Yes I am happy it is in as good a shape as it is, it has some minor damaged on one fender, no cracks just scraped on the side

    my wife is just beside herself waiting to get to take it on it's first ride

    I like the wheels on your trike
    Well, before you invest in wheels & tires like 15", I can see the change in the fender top, and I didn't know that Commanders had issues with the 15s, etc. Jim (aka: Lee H. Mann) would know better what will or will not work. Another thing, you don't want tire&wheel combos that are any more difficult to pull off at service time either. I have to hold my tongue just right, and wiggle just right to get them out, often involves turning the front inwards and getting the rear out with the trike on stands and suspension hanging.

    Our trike once scuffed a gas pump island post before we bought it, was repaired well, but no pinstriping on that side when we bought it. Them posts will "jump out". Then a fellow opened a car door into it once but I fixed that chip & blended it in.



    I am sure your wife will see miles of smiles on those three wheels
    .

    Quote Originally Posted by Lee H. Mann View Post
    CrystalPistol, I have some of those RWL Tires (used) and those ASA wheels too.
    Commander! … I couldn't think of the name, didn't realize the fenders limited the rear tires so. I looked through a history of Lehman Trikes I found on line years ago to no avail. I did find early GTLs had flat topped "humped" fenders, guess the hump helped with tire room under suspension compression especially two up.

    The tires you mention are ... maybe Dunlop Radial-Qualifyer GTs …. the fat 245/60-15 ? Mine wore out and I put these Lemans SR on that looked nice on a Lehman ('cause the name nearly matched … and I had used them before on a car and they wore well) , 215/70-15 though. Same OD, 4 pounds lighter per tire (24 vs 28 pounds each, I weighed them then), but a full inch narrower and it no longer looks like a old time steam roller from the rear. They aren't worn out yet, still good for a good season or two … or maybe even three. I just know they are no longer made, so when time comes I'll have to shop tires "by the letters" . I sometimes think I might be better off dropping to a 215/60-15 or maybe 225/60-15 to just make for easier removal. I seldom run interstate so slightly shorter rear tires won't hurt.
    Make Courtesy Your "Code of the Road" too!

  10. #10
    100+ Posts AJ1500's Avatar
    Join Date
    Apr 2014
    Location
    Midway Ga
    Posts
    107
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    So I have been going through everything and bringing our new to us trike back to life. I am almost ready to hand it over to my wife. I have a question about the rear suspension

    this trike has 2 air shocks and it is plumbed to a valve in the trunk, the air comp from the bike is not connected to anything. my question is if the comp works can I reconnect it to the line for the shocks and use the bikes compressor and dash gauge to monitor and control the air in the rear. I know the comp are slow as all get out as it takes what feels like forever to make changes on mine with the sidecar, but once it's where you want it you pretty much leave it alone. So is there a reason it was put together with an external valve

  11. #11
    1250+ Posts CrystalPistol's Avatar
    Join Date
    Apr 2010
    Location
    Shenandoah Valley of Virginia
    Posts
    1,414
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by AJ1500 View Post
    So I have been going through everything and bringing our new to us trike back to live. I am almost ready to hand it over to my wife. I have a question about the rear suspension

    this trike has 2 air shocks and it is plumbed to a valve in the trunk, the air comp from the bike is not connected to anything. my question is if the comp works can I reconnect it to the line for the shocks and use the bikes compressor and dash gauge to monitor and control the air in the rear. I know the comp are slow as all get out as it takes what feels like forever to make changes on mine with the sidecar, but once it's where you want it you pretty much leave it alone. So is there a reason it was put together with an external valve
    Mine's Progressive #416 air/spring/shocks are plumbed in. A buddies was not plumbed in. Look under the rear to see if the tire inflator hose was relocated from right saddle bag. You could use the extension hose to pump them up.
    Make Courtesy Your "Code of the Road" too!

  12. #12
    100+ Posts AJ1500's Avatar
    Join Date
    Apr 2014
    Location
    Midway Ga
    Posts
    107
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    when I had the seat and covers off I found the end that goes to the original shock just laying there, I didn't look for air hose from the side box. so your saying I should be able to plumb the shocks into the bikes air pump and use it rather than an external air source. I just didn't want to do all that if it won't work

  13. #13
    Gone But Not Forgotten
    Tech Contributor
    Lee H. Mann's Avatar
    Join Date
    Apr 2011
    Location
    Martinsburg, WV
    Posts
    4,065
    Thanks
    0
    Thanked 3 Times in 3 Posts

    Cool

    Quote Originally Posted by AJ1500 View Post
    when I had the seat and covers off I found the end that goes to the original shock just laying there, I didn't look for air hose from the side box. so your saying I should be able to plumb the shocks into the bikes air pump and use it rather than an external air source. I just didn't want to do all that if it won't work
    I am sure there was a reason why they disconnected the OEM air pump.

    Use a hand pump to check shock inflation. No more than 40psi.

    The shocks should be tied together equalizing the air pressure in each.

    The lines have 2 small o-rings at each connection, don't lose them.

    Use soapy water to check connections for air leaks and only tighten the connections hand tight.
    Jim Murphy
    EX-Lehman & Champion Dealer Owner Operator
    Iron Butt Rider 2001

    WHEN HELP IS OFFERED, A SIMPLE "THANK YOU" IS APPRECIATED.

  14. #14
    100+ Posts AJ1500's Avatar
    Join Date
    Apr 2014
    Location
    Midway Ga
    Posts
    107
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by Lee H. Mann View Post
    I am sure there was a reason why they disconnected the OEM air pump.

    Use a hand pump to check shock inflation. No more than 40psi.

    The shocks should be tied together equalizing the air pressure in each.

    The lines have 2 small o-rings at each connection, don't lose them.

    Use soapy water to check connections for air leaks and only tighten the connections hand tight.
    Thanks

    I can say there doesn't appear to be any leaks as it was still holding air in them after sitting for almost 2 years in a barn, I was just thinking it would be nice to monitor and control the air from the bike. But if it's not a good idea then I will go with that

    I have a bit of a learning curve with this trike VS my Wing with the sidecar

    the lines to the shocks are tied together under the valve. So will one of those little hand pumps used for bicycle tires work OK

  15. #15
    18500+ Posts
    Tech Contributor
    Gold Club Member
    Jack Klarich's Avatar
    Join Date
    Oct 2016
    Location
    Jax, Fla USA
    Posts
    18,092
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    . So will one of those little hand pumps used for bicycle tires work OK
    Yes it will, but keep in mind when you screw the pump off you will lose some air. This is why a pump like this is better

    Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
    Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL

  16. #16
    1250+ Posts CrystalPistol's Avatar
    Join Date
    Apr 2010
    Location
    Shenandoah Valley of Virginia
    Posts
    1,414
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by AJ1500 View Post
    when I had the seat and covers off I found the end that goes to the original shock just laying there, I didn't look for air hose from the side box. so your saying I should be able to plumb the shocks into the bikes air pump and use it rather than an external air source. I just didn't want to do all that if it won't work
    If the on board compressor is working, sure. GL1500 bikes had an air outlet in the right saddle bag and a hose to let one inflate a tire if needed, my trike had that auxiliary line re-routed to underneath the rear of the trike near the hitch. If your shocks are plumbed to a tee in the trunk, you could use that extension hose to pressurize the shocks … like pumping up a tire … if the compressor system all works. If that stock line is simply left uncapped, then the compressor system will likely not hold air well. Like already said, might be an issue with it not working, maybe desecant needs replacing or drying, maybe compressor motor is shot, maybe a leak at the control valve manifold in the right side fairing? First, you need to determine if it even works?

    Mine worked, is all plumbed, no leaks, but once set, no playing with it going down the road. If the shocks are Progressive #416s, when I put a set on my 1200, the Progressive instructions said to put bike on center stand, pump to 100psi, then eased off stand with load and drop pressure to cause a 1" drop with rider & passengers in place, so I figure they'll handle the psi. One up on ours I usually ran 40-45 psi, but two up & loaded, I ran 65-75 psi. Two up at 40-45 resulted in bottoming on the bumps.

    I don't see a problem with just pumping through the tee when needed, once you find the sweet spot, you'll not need constant adjusting.
    Make Courtesy Your "Code of the Road" too!

  17. #17
    100+ Posts AJ1500's Avatar
    Join Date
    Apr 2014
    Location
    Midway Ga
    Posts
    107
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by CrystalPistol View Post
    If the on board compressor is working, sure. GL1500 bikes had an air outlet in the right saddle bag and a hose to let one inflate a tire if needed, my trike had that auxiliary line re-routed to underneath the rear of the trike near the hitch. If your shocks are plumbed to a tee in the trunk, you could use that extension hose to pressurize the shocks … like pumping up a tire … if the compressor system all works. If that stock line is simply left uncapped, then the compressor system will likely not hold air well. Like already said, might be an issue with it not working, maybe desecant needs replacing or drying, maybe compressor motor is shot, maybe a leak at the control valve manifold in the right side fairing? First, you need to determine if it even works?

    Mine worked, is all plumbed, no leaks, but once set, no playing with it going down the road. If the shocks are Progressive #416s, when I put a set on my 1200, the Progressive instructions said to put bike on center stand, pump to 100psi, then eased off stand with load and drop pressure to cause a 1" drop with rider & passengers in place, so I figure they'll handle the psi. One up on ours I usually ran 40-45 psi, but two up & loaded, I ran 65-75 psi. Two up at 40-45 resulted in bottoming on the bumps.

    I don't see a problem with just pumping through the tee when needed, once you find the sweet spot, you'll not need constant adjusting.
    all very valid points, maybe I'll just leave well enough alone. I will say though my thought wasn't to use the hose from the saddle bag but to use the actual hose and banjo fitting that went on top of the OEM shock so the system would work like it was original

    I agree once set up, we won't be messing with it so I guess it's fine like it is

  18. #18
    1250+ Posts CrystalPistol's Avatar
    Join Date
    Apr 2010
    Location
    Shenandoah Valley of Virginia
    Posts
    1,414
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by AJ1500 View Post
    … etc … I agree once set up, we won't be messing with it so I guess it's fine like it is
    Just a final thought, if you find the on board compressor doesn't work, etc, there are small plug in lighter socket portables in carry bags, etc. I have a couple, they are slow but then so is the onboard if pumping up a car tire, but small airlines & the air shocks would be faster.

    A few years ago I bought an "Air Dragon", it was really cheap ($10.99 rings a bell) @ Ollies, I tried it once, it would not pump. Just shut off as soon as it started … so I set it on a shelf to collect dust. I was gonna toss it a couple months ago when I spied it, but it just seemed to be a handy size (I actually did toss it, it was still boxed, but I pulled it out of the trash as I was bored) … so then I took it apart to attempt a fix but there was nothing wrong that I could see. Then I read the manual (some people do that I'm told???), it was set on "0" when plugged in until you set a psi, so it was pumping 0 psi. I then set it higher than zero, SHAZAM … it worked and shut off at the setting programmed.
    Make Courtesy Your "Code of the Road" too!

  19. #19
    100+ Posts AJ1500's Avatar
    Join Date
    Apr 2014
    Location
    Midway Ga
    Posts
    107
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by CrystalPistol View Post
    Just a final thought, if you find the on board compressor doesn't work, etc, there are small plug in lighter socket portables in carry bags, etc. I have a couple, they are slow but then so is the onboard if pumping up a car tire, but small airlines & the air shocks would be faster.

    A few years ago I bought an "Air Dragon", it was really cheap ($10.99 rings a bell) @ Ollies, I tried it once, it would not pump. Just shut off as soon as it started … so I set it on a shelf to collect dust. I was gonna toss it a couple months ago when I spied it, but it just seemed to be a handy size (I actually did toss it, it was still boxed, but I pulled it out of the trash as I was bored) … so then I took it apart to attempt a fix but there was nothing wrong that I could see. Then I read the manual (some people do that I'm told???), it was set on "0" when plugged in until you set a psi, so it was pumping 0 psi. I then set it higher than zero, SHAZAM … it worked and shut off at the setting programmed.
    that's funny, glad you figured it out

    actually I have a little portable that stays in my wing and had every intention of getting one for this one. we never go anywhere without one, saved us on the side of the road once when I picked up something and got a flat, plugged it and pumped it up, got us home so I could replace the tire. paid for itself right then and there

    I was hoping to get by but it's starting to look like I may have to remove the carbs on this one. can't seem to get it to run right. so far 3 cans sea foam in about 1 1/2 tanks of gas

    I had it so heavy in seafoam I'm amazed it would run at all trying to dissolve the varnish, right now I'm running just gas trying to get it to clean everything out but I think there is some trash or goop moving around in there, it will run good for a bit then it's all I can do to keep it moving. anything under about 3K with the choke and it just surges, it will idle now but most of the time it surges

    anyway I knew it may come to that as it sat for a long time with old gas not being run at all

  20. #20
    100+ Posts Tynker's Avatar
    Join Date
    Jun 2016
    Location
    Rosharon, Texas
    Posts
    110
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Thumbs up

    Quote Originally Posted by AJ1500 View Post
    that's funny, glad you figured it out

    actually I have a little portable that stays in my wing and had every intention of getting one for this one. we never go anywhere without one, saved us on the side of the road once when I picked up something and got a flat, plugged it and pumped it up, got us home so I could replace the tire. paid for itself right then and there

    I was hoping to get by but it's starting to look like I may have to remove the carbs on this one. can't seem to get it to run right. so far 3 cans sea foam in about 1 1/2 tanks of gas

    I had it so heavy in seafoam I'm amazed it would run at all trying to dissolve the varnish, right now I'm running just gas trying to get it to clean everything out but I think there is some trash or goop moving around in there, it will run good for a bit then it's all I can do to keep it moving. anything under about 3K with the choke and it just surges, it will idle now but most of the time it surges

    anyway I knew it may come to that as it sat for a long time with old gas not being run at all
    Instead of Seafoam, try 2 cans of Berrymans B12, it works wonders for problems like yours.

Page 1 of 2 1 2 LastLast

Similar Threads

  1. One Of Our Trike Talk Family Members Needs Our Help
    By David357 in forum General Discussion
    Replies: 2
    Last Post: 10-22-2018, 08:52 PM
  2. Wife and I went on our first trike ride together!
    By CaveManDave in forum VW Powered Trikes
    Replies: 14
    Last Post: 05-09-2016, 11:43 AM
  3. Our Trike on a Trailer for the first time
    By KRUZR in forum Trailers / Campers
    Replies: 8
    Last Post: 06-20-2012, 02:15 PM
  4. Looking for our first Trike
    By davidalanwidick in forum New Member Introductions
    Replies: 8
    Last Post: 03-18-2012, 03:00 AM
  5. Our first Trike trip
    By moonstar in forum General Discussion
    Replies: 24
    Last Post: 07-30-2009, 12:27 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •