On a 2020 TriGlide, has anyone that is running stock bars found a way to mount the Dynojet Power Vision (PV-2b)? If so, what mount system are you using?
Likes: 9
Thanks: 3
Power Vision Mount
On a 2020 TriGlide, has anyone that is running stock bars found a way to mount the Dynojet Power Vision (PV-2b)? If so, what mount system are you using?
Get a hold of D K Customs https://www.dkcustomproducts.com/contacts
You will want the handle bar mount kit PLUS the visor kit
The visor kit makes the Power Vision tuner now a quick release so you can stash it in a saddle bag when you park so it does not get stolen
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL
Ram Mounts.
I used some of the typical Ram System mounting. Make sure you buy the hood for it, but NOT the Chrome hood.. The glare from the sun will blind you. You can't tell from the pictures, but when I am sitting on the trike and riding I can see all of the gauges with no problems. *****However, the bars are the Khrome Works narrow 2 sweepers, not the stock bars.*****Originally Posted by mstcswagb20
16 TGU Mysterious Red / Velocity Red. FM Ceramic Head pipe and FM E-Series tunable exhaust. PV Target Tune-AT WB Tuner. DK Outlaw 606 AC with EBS, Ward’s FCS fans. DK Custom Oil filter/Cooler relocation kit, Comfort Lift and 14 inch shocks. DK tank lift, wind deflectors, floorboard extenders, and tour pak relocator. Chrome TGU wheels. Bad Ass Lights tail lights. Lighted controls and Krome Works 2+2 narrow handle bars.
Thanks for the tips! I had the pv-2b entire kit on my previous bike, but this time, when I ordered the pv-2b it didn't include the mounting kit and hood. I called Fuel Moto and they explained that they stopped including the mounting kit/hood because they could no longer source them. I don't know if DK Custom will have just the mounting kit but I'll prob give them a call. I saw the Ram Mounts, but I was a little skeptical about using a U-bolt mount. Any opinions about how tightly it holds without scratching or deforming the bar?
Not really
I am pretty OCD about all of my "stuff" and especially the TGU. I have not noticed any scratching or "mashing" of the chrome on the bars with the ram mount. However, I get them exactly where I want them before tightening the nuts, and I do not just "crush" them down. Yes, give DK a call about the mount and hood. His web site shows a PV kit with the mount and hood. However, as you said, I don't know if he sells just the mount and hood. If he doesn't just do a google search.
16 TGU Mysterious Red / Velocity Red. FM Ceramic Head pipe and FM E-Series tunable exhaust. PV Target Tune-AT WB Tuner. DK Outlaw 606 AC with EBS, Ward’s FCS fans. DK Custom Oil filter/Cooler relocation kit, Comfort Lift and 14 inch shocks. DK tank lift, wind deflectors, floorboard extenders, and tour pak relocator. Chrome TGU wheels. Bad Ass Lights tail lights. Lighted controls and Krome Works 2+2 narrow handle bars.
I have used the dynojet mount for 6 years I could not ask for better Well on the phone its upside down hopefully a moderator will fix it
Vintage 09' Vivid Black, Boyesen X force intake, DK Customs DIY external breather, PV tuner, Mighty Mite love Jugs,Titanium Wrapped Header pipe, Khrome Werks 2+2 Wide Sweepers, DK 2" tank lift deluxe, Air Deflectors, Rear Bumper, Fender Chrome trim, Kuri. Rear lights, 9" LRS recurve flat top wind screen, LED headlight and spots, Hubcaps rear wheels
No problem, just stand on your head.I have used the dynojet mount for 6 years I could not ask for better Wellon the phoneitsupsidedown hopefullya moderatorwill fix itlooks fine now
2020 TriGlide Tahitian Teal aka (Hawaiian Hussy). Avon frt & Comfortred rear tires. ProAction frt & rear susp. RZ seat. DK floorboard extension & rear axle retainer kit with EBS, HD pull -back bars. Custom Dynamics front turn signals & Vent grill. All ,HD "Edge Cut " accessories.
Here ya go.
This looks a little easier on the eyes.
16 TGU Mysterious Red / Velocity Red. FM Ceramic Head pipe and FM E-Series tunable exhaust. PV Target Tune-AT WB Tuner. DK Outlaw 606 AC with EBS, Ward’s FCS fans. DK Custom Oil filter/Cooler relocation kit, Comfort Lift and 14 inch shocks. DK tank lift, wind deflectors, floorboard extenders, and tour pak relocator. Chrome TGU wheels. Bad Ass Lights tail lights. Lighted controls and Krome Works 2+2 narrow handle bars.
If Kevin does not sell the visor separate check Dennis Kirk and Revzilla, they sell them in black and chrome. I have the chrome on and it holds up good. The best thing is the PV pops out easily for safe storage
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL
I use there cradle that came with the PV and screw that to the HD GPS mount ... mine is the old style and has been on like 4 bikes, but it has an adjustable swivel that you can tighten in place. Kinda pricy ... like $100, new version is like $130.
Posting Permissions
