TriPod

[TomyJ]

Wires the flasher, Possible buyer came by this morning,And ready the full 48 Volts, F-R, Speeds 1-2-3 wires,

[trikeman]

[TomyJ]

Buttoned up the J-Boxes, rear flasher lights work good and the horn is way to loud,

[TomyJ]

Charge Batts--More soon-er,

[TomyJ]

Should be moving this week, then this thing will be going to a wiring pro, ...

[TomyJ]

Moving sucks, the plumbing, Ducts come apart, carport is still not enclosed, but the hell with it, TriPod is going in for the wiring fix this week,

[TomyJ]

Sometimes things don't according to plan, such as the new house with many problems, and the wiring didn't turn out the way the instructions noted (Damn Chinese)and the heat here in Riverside so I take it apart and move the electrics inside,and with the help from YouTube wiring problems solved,Bench Tested that is, now to put it back on the trike to find the mistakes...

[TomyJ]

Color coded wires mixed up from controller to twist grip,forward and reverse are mixed on the selector (minor fix)then bolt down the engine+ chain and GO-GO, I hope...

[Jack Klarich]

Good 2 C U back at it, still following

[Zammy]

Yep, still following you Tommy, taking shape at last.

[TomyJ]

This is my so-called wiring from a pro, and I paid for this shit...

[Jack Klarich]

This is my so-called wiring from a pro, and I paid for this shit...

That is ugly from a pro, I would expect to see soldered joints with heat shrink @ the very least from a pro

[LarryA]

The real pro is the man in the mirror....you will have to wire it yourself...

[TomyJ]

Setting up the wiring now on the trike (note the batts). OK!The wires were mixed from the controller to the throttle (Thanks China) AND!!! I found a local wiring/solder guy who helps restore old pin ball machines locally, How cool is that... After he fixes TriPod then he will do RebelRouser.

[TomyJ]

I am not destined to get the projects finished,The wiring guy's wife gave him covid, so I decided to do one of my "Honey Do's List" change the double side stairs for more room in the carport.

[TomyJ]

Batteries rewire, Still at it, a little at a time...

[TomyJ]

MockUp again! DAMN! Most of the wiring is straightened out BUT when the motor is engaged the diamond plate moves up or down, not enough support/bracing for the motor mount plate, so back to the drawing board for more bracing......

[TomyJ]

-Do you think these added braces will stop the flex? EDIT: Have to order the aluminum from eBay, not a large supply here in Hemet Ca.

[Jack Klarich]

Yes, nice job with the fab and welding

[TomyJ]

The welder said this is over kill, I hope he's right.