TriPod

[clinverc]

Attachment 97415-Attachment 97416-Attachment 97417-Back from the Alum. welder, Trying the other forks first, Ordered a 10" Rotor because of the swing arm/HeimJoint offset and started alignment of the caliper. The seat post/forward shock mount is ready for measurements and cutting to size with the seat bracket. Still waiting to order the electric kit, $$$

Excited to see how it turns out.

[TomyJ]

Excited to see how it turns out.

Did you see photo #1 of first TriPod, Added front fork and electric motor in front wheel and disc brake,

350W 36V = 20 MPH and could go 25 miles of travel,

[clinverc]

Aluma Trike, Since this is not a tricycle and will be powered by a front wheel electric motor or a Briggs and Stratten motor I am going to post this as a possible build. The frame material will be 6061-T6 aluminum (aerospace) the forks will be from a 1940s whizzer with 26" hub motor, the rear will have 16"x3" or 18"x 6" 8" rim dia. I want the rear to have a suspension so I am thinking wide 16" swing arm with coil over shocks and a motorcycle seat, This will be used for local travel (parts/beer chaser) 25 MPHish and bike lanes, This will also be Ca DMV compliant. The first photos will be of Tri Pod1 I built many years ago so this will follow the same build but different. This should also be a low budget fun thing that you can also drive on the streets...EDIT: 36V 350W 25MPH 20 miles of travel.

Attachment 93800

First build I was so proud, then the neck broke-

Attachment 93801-Attachment 93802-Attachment 93803

Big Wheel, Chopper style. PLEASE PLEASE PLEASE your opinions count, Shall I build TriPod2???

Go for it!

[TomyJ]

---10" rotor, Caliper bracket set for welding, waiting on my seat frame and then her seat frame.

[TomyJ]

---Low buck rattle can...El Cheapo! EDIT: This is the closest I could get to aluminum color, It's called caliper.

[TomyJ]

--Assemble-Working also on the 12V Battery box for the running lights...

[TomyJ]

-There's the paint, ANDDD! Do you guy's have any idea's for the brake rotor? Look's BLAAA-YUK, I'm thinking masking off the area that the caliper will touch the paint the rest or designs? Would love drill holes and slots, BUT $$$, This one was only $60. Have you guy's ever read the BOOK? DMV Code Book, about low speed vehicles? You sure can have alot of fun making low speed vehicles that are street legal and 16 year old's can drive/ride to local and school???

[TomyJ]

-HappyEaster--Made a little Z shaped brace for the fender to fork, 1/4 28 thread hole on the top, 10.32 thread hole on the bottom, damn thing took 2 days, and 3-4 days of internet search to find "original style" Schwinn lower fender brace to hub. Can you see the hub brace that keeps the brake from spinning? Now the brace on this one is not going to be easy, Double angles and center hole with square nut and drill hole through lower springer fork leg and it needs to be on right side, NOT left, damn me...

[TomyJ]

-----I hope that front brake clamp is going to work, looks kinda cool? Tilted front seat back a little, Side view say's it all, front fender brackets finished and really good set, next will be the rear disc brake master cylinder system,

[Jack Klarich]

I like the use of Heim joints you have on the rear swing arm frame

Adjustable too another big plus for alignment

[LarryA]

A nice low/pro look to that trike...keep up the good work!

[TomyJ]

-Master Cylinder time, This is going to take awhile...

[TomyJ]

-Maybe?

[TomyJ]

I do not think a bicycle hand brake will handle the pressure of the 125cc master cylinder, Better to be safe than sorry. Bulkhead hole is .5, Rod is .4, Lucky me sometimes the shit does come together, need to shorten the rod about .75? then the pedal will not be so vertical...

[TomyJ]

---Rear brake is finished and bench test works, Now a second look at the front brake brace, needs drilling. The second seat is figured out and get metal tomorrow for the bracing. Got the check but haven't ordered the engine kit yet...

[TomyJ]

Rear seat frame and front brake brace...Hi Scoobs...

[TomyJ]

Now you can see the seating position, foot pegs next and extra brace for wife seat, We got our first shot today, no problems so far,

[Jack Klarich]

Running boards maybe?

[TomyJ]

Running boards maybe?

-How about "MiniFloorBoards" Do you think that will work?

[Jack Klarich]

-How about "MiniFloorBoards" Do you think that will work?

Yes indeed, that fits nicely