Gotta replace my front wheel bearings. I have an account with Motion Industries. I use a lot of SKF and Timken bearings at work so which would be the best for my Trike?
Thanks y'all.
Gotta replace my front wheel bearings. I have an account with Motion Industries. I use a lot of SKF and Timken bearings at work so which would be the best for my Trike?
Thanks y'all.
2016 Tri Glide, More DK than HD. Just shut up and ride.
Both good bearings, I like Timken's as a first choice
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL
Looks like it will be SKF as that's what my local supplier has in stock. Looks like I'll have it fixed today.
2016 Tri Glide, More DK than HD. Just shut up and ride.
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL
Can you supply Part # for either of those bearings ?? TIA
2020 TriGlide Tahitian Teal aka (Hawaiian Hussy). Avon frt & Comfortred rear tires. ProAction frt & rear susp. RZ seat. DK floorboard extension & rear axle retainer kit with EBS, HD pull -back bars. Custom Dynamics front turn signals & Vent grill. All ,HD "Edge Cut " accessories.
Turns out it wasn't the bearings, it's the tire. I changed the bearings and put the wheel back on, took it for a test ride after torqueing everything down and it still did it. Came back, took it back off and cleaned it real good to see the tire. I have some cupping on the left side (the side that just happens to wobble and shake when turning left) and possibly a broke belt in the tire. It's a Commander II that come on the bike so I have no idea how many miles it has on it since I bought it used.
All my shop has in stock are American Elites so I'm getting one mounted tomorrow. I'm just going to ride it over there and have them replace the tire and they can double check everything I did.
To be continued...
2016 Tri Glide, More DK than HD. Just shut up and ride.
2020 TriGlide Tahitian Teal aka (Hawaiian Hussy). Avon frt & Comfortred rear tires. ProAction frt & rear susp. RZ seat. DK floorboard extension & rear axle retainer kit with EBS, HD pull -back bars. Custom Dynamics front turn signals & Vent grill. All ,HD "Edge Cut " accessories.
Well, it was the upper motor Mount again. The bolt had backed out and was hammering on the frame. Went to Bumpus and raised hell but they said about all that can be done is check it regularly and put loctite on it. Bullshit. Then when I got back from there, pulled in the driveway add heard a tingling noise. The other damned bolt had backed out. I put loctite on it and torqued it back down. Guess I’ll just have to keep a 9/16 wrench on the trike from now on.
i guess I’m good for another 4-5000 miles because that’s how long it’s been since the head was replaced for this same issue.
2016 Tri Glide, More DK than HD. Just shut up and ride.