Glad to see everything is working well with your TPMS system. Thanks for the update.
Glad to see everything is working well with your TPMS system. Thanks for the update.
Stupid is a choice
Dumb is not a choice
Stupid can be fixed
Dumb cannot be fixed.
Stupid is a choice
Dumb is not a choice
Stupid can be fixed
Dumb cannot be fixed.
The valve stem hole on a Triglide Ultra Classic wheel is definitely 11.3 mm.
I put an Enkei 85° valve stem in the front wheel and angled it towards the wheel center line, and two straight ones on the rear wheels.
I have no clearance problems at all with the front rotors and no concerns as I would have with rubber valve stems.
It appears that retrofitting internal TPMS sensors in Triglide standard wheels is not possible, as the inner wheel profile for the front rim, and the angle between the valve stem hole and the flat part of the rear rim don’t match any compatible sensors.
You have to remember that the HD TPMS sensors come out of one supplier in France; standard automotive type sensors cannot be used with a Harley.
NRA-Certified Instructor/CRSO
FAA Part 61/107 Pilot
2021 FLHTCUTG
2009 BMW R1200RT