was that the Kuryakyn 7677?
2019 Goldwing CSC
Yep, that's the one. It will not fit on the new coolant pump that Harley is using to replace the old Chinese piece of crap that is failing on all the 2014-2016 touring bikes.
Really sucks that Harley doesn't have a recall to replace all the old pumps. It's not like we bought a cheap motorcycle.
Makes me mad to have to spend over $800.00 to replace something that only had 10,500 miles on it.
If an automobile manufacturer did stuff like this they would not be in business very long.
Ride safe
Lawless
2015 Harley Ultra Tri Glide
Sorry about that Lawless, I know I have a store that is 5 miles away that I can return stuff from amazon if I have to, so far haven't had to.
Talking about coolant cover, I have hard time keeping my coolant cover pushed into the bottom part of it, if it wasn't for the way it hooks up on top I would have lost my coolant cover a long time ago, every so often I see it dangling, not sure how long it been that way but get on ground and push it back on. It is the stock cover by the way not aftermarket or the expensive wanna be chrome cover from harley
All for now Trampas
Thanks for the reply Trampas. Really sad that Kuryakyn doesn't know their products better. I have not had any trouble with the original cover coming loose. I just wanted to dress up the front end after getting the new pump installed. Kuryakyn and Amazon are no help when you have a question.
Ride safe my friend
Lawless
2015 Harley Ultra Tri Glide
Me too. On my 2018 I lost the cover while on a road trip in the UP of Michigan. Shout out to Bald Eagle H-D of Marquette, MI, who took one off a TG on the showroom floor to sell to me. It too became loose within a short time. I found a fix and it works great for me. There is a 'boss' 'tab' not sure what to call it or its purpose just to the rear of the bottom of the cover. I drilled a hole in the bottom of the cover and put a cable tie through the hole and over the boss/tab. Won't come off now!
I had my stock cover fall off 3-4 times after taking it to the dealer for service.
Fortunately each time it fell off in the yard.
Found that the problem was the tech was not taking the time to mount it back on correctly.
Started doing my services myself and if you make sure the rubber grommets are lined up and put on correctly it won't come off.
Hasn't fell off since.
I pays to pay attention to the details.
Bob
I bought the chrome.
It was warped, I had to squeeze it between my knees with a hair dryer then later a propane torch to get it back in shape. Move quickly if you use a torch!
Then it fit loose but finally discovered when I pulled my oem off I dislodged one of the grommets & it was missing.
Once I replaced it I got a snug fit.
You have to wrap a finger around back & ensure you feel the top of the cover protrude through the grommet ...
A good shove on each side "after the top two slip over was in place", secured it nicely.
It's now more secure than my oem imo.
- - - Updated - - -
I meant wrap your finger around back & ensure you feel the "tip" of the cover protrude through the grommet.
I drilled a hole in mine and used a wire tie to secure it.
hardheaded
On my 14 I upgraded the pump to the newer one and the old cover worked fine so I don’t see why that one wouldn’t work.
Be who your dog thinks you are.
2021 Tri Glide Ultra Vivid Black with some Farkles.