Coolant pump cover

[Lawless]

Return to Kury

I ordered it from Amazon so have to return it to Amazon and pay shipping charges because we don't have an UPS store here where I live.

Sucks big time.

[Jack Klarich]

I ordered it from Amazon so have to return it to Amazon and pay shipping charges because we don't have an UPS store here where I live.

Sucks big time.

That really bites, sometimes I hate ordering stuff on line

[woody]

was that the Kuryakyn 7677?

[Lawless]

was that the Kuryakyn 7677?

Yep, that's the one. It will not fit on the new coolant pump that Harley is using to replace the old Chinese piece of crap that is failing on all the 2014-2016 touring bikes.

Really sucks that Harley doesn't have a recall to replace all the old pumps. It's not like we bought a cheap motorcycle.

Makes me mad to have to spend over $800.00 to replace something that only had 10,500 miles on it.

If an automobile manufacturer did stuff like this they would not be in business very long.

Ride safe

[Trampas]

Sorry about that Lawless, I know I have a store that is 5 miles away that I can return stuff from amazon if I have to, so far haven't had to.

Talking about coolant cover, I have hard time keeping my coolant cover pushed into the bottom part of it, if it wasn't for the way it hooks up on top I would have lost my coolant cover a long time ago, every so often I see it dangling, not sure how long it been that way but get on ground and push it back on. It is the stock cover by the way not aftermarket or the expensive wanna be chrome cover from harley

All for now Trampas

[Lawless]

Thanks for the reply Trampas. Really sad that Kuryakyn doesn't know their products better. I have not had any trouble with the original cover coming loose. I just wanted to dress up the front end after getting the new pump installed. Kuryakyn and Amazon are no help when you have a question.

Ride safe my friend

[rhino 2]

I ordered it from Amazon so have to return it to Amazon and pay shipping charges because we don't have an UPS store here where I live.

Sucks big time.

If you don't have a UPS near you Amazon will pick up returns at/from your door...Unless you ordered it from Amazon through a ''3 party'' vender......Which i will never do! just for that reason ..Returns...

[Lawless]

If you don't have a UPS near you Amazon will pick up returns at/from your door...Unless you ordered it from Amazon through a ''3 party'' vender......Which i will never do! just for that reason ..Returns...

Amazon did not offer that option. I had to take it to a store which accepted UPS packages and then had to pay return postage to Amazon.

I will be very selective about ordering from Amazon again.

Thanks for the reply

[rhino 2]

Amazon did not offer that option. I had to take it to a store which accepted UPS packages and then had to pay return postage to Amazon.

I will be very selective about ordering from Amazon again.

Thanks for the reply

Seriously......You have to look and when it says shipped from 3rd party stay away..

3rd party suppliers have their own return policy ....

[ultrafxr]

Talking about coolant cover, I have hard time keeping my coolant cover pushed into the bottom part of it, if it wasn't for the way it hooks up on top I would have lost my coolant cover a long time ago, every so often I see it dangling, not sure how long it been that way but get on ground and push it back on. It is the stock cover by the way not aftermarket or the expensive wanna be chrome cover from harley

All for now Trampas

Me too. On my 2018 I lost the cover while on a road trip in the UP of Michigan. Shout out to Bald Eagle H-D of Marquette, MI, who took one off a TG on the showroom floor to sell to me. It too became loose within a short time. I found a fix and it works great for me. There is a 'boss' 'tab' not sure what to call it or its purpose just to the rear of the bottom of the cover. I drilled a hole in the bottom of the cover and put a cable tie through the hole and over the boss/tab. Won't come off now!

[Jack Klarich]

Me too. On my 2018 I lost the cover while on a road trip in the UP of Michigan. Shout out to Bald Eagle H-D of Marquette, MI, who took one off a TG on the showroom floor to sell to me. It too became loose within a short time. I found a fix and it works great for me. There is a 'boss' 'tab' not sure what to call it or its purpose just to the rear of the bottom of the cover. I drilled a hole in the bottom of the cover and put a cable tie through the hole and over the boss/tab. Won't come off now!

The oil cooler cover on the Freewheelers is a piece of junk also, very poor design IMO

[Trampas]

Me too. On my 2018 I lost the cover while on a road trip in the UP of Michigan. Shout out to Bald Eagle H-D of Marquette, MI, who took one off a TG on the showroom floor to sell to me. It too became loose within a short time. I found a fix and it works great for me. There is a 'boss' 'tab' not sure what to call it or its purpose just to the rear of the bottom of the cover. I drilled a hole in the bottom of the cover and put a cable tie through the hole and over the boss/tab. Won't come off now!

Thanks for that tip ultrafxr, will do that, don't really want to buy a cover and not sure what the cost but that will be a cheap fix for sure thanks again

All for now Trampas

[hardwickbv]

I had my stock cover fall off 3-4 times after taking it to the dealer for service.

Fortunately each time it fell off in the yard.

Found that the problem was the tech was not taking the time to mount it back on correctly.

Started doing my services myself and if you make sure the rubber grommets are lined up and put on correctly it won't come off.

Hasn't fell off since.

I pays to pay attention to the details.

Bob

[ultrafxr]

I had my stock cover fall off 3-4 times after taking it to the dealer for service.

Fortunately each time it fell off in the yard.

Found that the problem was the tech was not taking the time to mount it back on correctly.

Started doing my services myself and if you make sure the rubber grommets are lined up and put on correctly it won't come off.

Hasn't fell off since.

I pays to pay attention to the details.

Bob

I agree with being careful to insure it is properly seated into the rubber grommets. Mine was. Even replaced the grommets but it still worked loose over time. Poor design IMO.

[Windstrings]

I bought the chrome.

It was warped, I had to squeeze it between my knees with a hair dryer then later a propane torch to get it back in shape. Move quickly if you use a torch!

Then it fit loose but finally discovered when I pulled my oem off I dislodged one of the grommets & it was missing.

Once I replaced it I got a snug fit.

You have to wrap a finger around back & ensure you feel the top of the cover protrude through the grommet ...

A good shove on each side "after the top two slip over was in place", secured it nicely.

It's now more secure than my oem imo.

- - - Updated - - -

I meant wrap your finger around back & ensure you feel the "tip" of the cover protrude through the grommet.

[headheaded]

I drilled a hole in mine and used a wire tie to secure it.

[rhino 2]

I bought the chrome.

It was warped, I had to squeeze it between my knees with a hair dryer then later a propane torch to get it back in shape. Move quickly if you use a torch!

Then it fit loose but finally discovered when I pulled my oem off I dislodged one of the grommets & it was missing.

Once I replaced it I got a snug fit.

You have to wrap a finger around back & ensure you feel the top of the cover protrude through the grommet ...

A good shove on each side "after the top two slip over was in place", secured it nicely.

It's now more secure than my oem imo.

- - - Updated - - -

I meant wrap your finger around back & ensure you feel the "tip" of the cover protrude through the grommet.

Avery ..Welcome to Trike-Talk..👍👍..

[ultrafxr]

I drilled a hole in mine and used a wire tie to secure it.

Me too. There is a “tab” on the engine case at the rear of the cover. Secure now.

[Notgrownup]

On my 14 I upgraded the pump to the newer one and the old cover worked fine so I don’t see why that one wouldn’t work.