Saddlebags

[W3JNP]

The bags in the picture are for the TriGlide.

Does anyone make anything similar for the Freewheeler?

 

[JTJersey]

The bags in the picture are for the TriGlide.

Does anyone make anything similar for the Freewheeler?

Can't think of any reason they wouldn't work on a TriGlide, same fenders. May look a little odd unless you've got the rack on the trunk lid, but should function fine.

 

[rhino 2]

The bags in the picture are for the TriGlide.

Does anyone make anything similar for the Freewheeler?

If you don't carry a passenger..:Shrug:..[They might dig into their calfs] You can put them on a Freewheeler........

 

[W3JNP]

Thanks for the replies. It looked to me like the grab handles might be in the way and I thought they may be a bit to wide to fit in the open space.

 

[Teufelhunde]

Can't think of any reason they wouldn't work on a TriGlide, same fenders. May look a little odd unless you've got the rack on the trunk lid, but should function fine.

If you do this, just remember that the install involves drilling holes in the fenders.....measure 27 times, drill once....

 

[W3JNP]

Here is what I went with.

Added one of these to each side.

Held them in place with 3M very high bond dual lock tape with no holes drilled.

They are mounted rock solid and adequate for my need.

 

[rhino 2]

Here is what I went with.

Added one of these to each side.

Held them in place with 3M very high bond dual lock tape with no holes drilled.

They are mounted rock solid and adequate for my need.

ThumbUp........ThumbUp.......

 

[JTJersey]

Here is what I went with. Added one of these to each side. Held them in place with 3M very high bond dual lock tape with no holes drilled.

They are mounted rock solid and adequate for my need.

Now they look like they could be useful. Nice addition.

 

[radismukes]

The bags in the picture are for the TriGlide.

Does anyone make anything similar for the Freewheeler?

Fits '09-later FLHTCUTG and '10-'11 FLHXXX models.

 

[priell3]

I read on Facebook that these will work on a Freewheeler. Just lots of measuring involved prior to drilling.

I like what W3JNP did. What bags are those?

 

[JTJersey]

Do they get in the way when removing side panels?

 

[priell3]

Do they get in the way when removing side panels?

They can be quickly removed to access the panels or to wash the trike.

https://www.facebook.com/groups/422303641252119/posts/1645229412292863/

 

[W3JNP]

I read on Facebook that these will work on a Freewheeler. Just lots of measuring involved prior to drilling.

I like what W3JNP did. What bags are those?

Sorry, I just saw your question from some time ago.

These are no name bags that I found at a swap meet. I mounted them with VHB 3M dual sided tape and they stay in place without problem.