What is the torque for the rear wheel lug nuts for a 2013 triglide?
What is the torque for the rear wheel lug nuts for a 2013 triglide?
90 to 100 foot pounds, then check again after 100 miles, when I did my lift kit on my 2018 I checked the rims at 50 miles and then again at another 50, just me, I put mine at 95 lbs.
All for now Trampas
I do it caveman style......Tighten till they squeak.......Been doing it that way all my lug nut tightening career........
Sometimes a Cigar is Just a Cigar.....
2019 Tri-Glide.......
100 ft. lbs is what I set mine at. Then check again after 50 miles or so of riding.
Kevin
I use 100 Ft Lbs of torque, and recheck in 50 miles
Any time I have the wheels off I clean all mating surfaces before putting the wheels back on to ensure equal torquing of the the nuts
I also use torque sticks backed up with a good torque wrench
I have had Snap on Tools torque sticks since the early 90s, they are pretty amazing
Many outlets are now available to purchase these tools, back in the early days not so much
Have a look here
https://www.homedepot.com/p/Capri-To...B&gclsrc=aw.ds
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL
Oh yeah. Get a 19mm socket for the lug nuts. While a 3/4" socket will work it will round the edges of the lug nut flats . . . as Kevin knows, lol.