150 Most Recent Posts

Thread AuthorPostersPost AuthorForumThread/Post Link
DK Custom Products362New Orleans KevinHarley Tri GlideWhat did you do to Your Tri-Glide T...
woody11Marc HMaggie Valley Gather...Maggie Valley 2024
DK Custom Products362520fdHarley Tri GlideWhat did you do to Your Tri-Glide T...
stancotreau3Marc HLehman TrikeLehman Storm rear brake pads
woody11Rmitchell55Maggie Valley Gather...Maggie Valley 2024
Bear22012SullyNew Member Introduct...New member
Bear22012Marc HNew Member Introduct...New member
paid4c44Jack KlarichHonda Goldwing Gen3 ...USB abd 12V DC in upper trunk
Jack Klarich1Jack KlarichGeneral DiscussionMY first guitar
TomyJ3Jack KlarichTrailers / CampersTrikeTrailer
GPz11006Jack KlarichHonda TrikesHonda Valkyrie Conversions
msocko354Jack KlarichBBQ, Grilling, Cooki...A Little Outdoor Cooking
woody11Jack KlarichMaggie Valley Gather...Maggie Valley 2024
ctdair7Jack KlarichHarley Tri GlideHot Rotors After New Pads
Notgrownup4Jack KlarichHarley Tri GlideOrdered a Power vision 3 and a Fuel...
Notgrownup4RKplus10Harley Tri GlideOrdered a Power vision 3 and a Fuel...
Bear22012trike ladyNew Member Introduct...New member
ctdair7ROAD DOGHarley Tri GlideHot Rotors After New Pads
Bear22012Uncle FesterNew Member Introduct...New member
DK Custom Products362Jack KlarichHarley Tri GlideWhat did you do to Your Tri-Glide T...
DK Custom Products3621dn5upHarley Tri GlideWhat did you do to Your Tri-Glide T...
Motorcycle Mike3Jack KlarichGeneral DiscussionDickey Betts Passed.
Jack Klarich1Jack KlarichGeneral DiscussionMy Threads
stancotreau3Jack KlarichLehman TrikeLehman Storm rear brake pads
Sully51dn5upBBQ, Grilling, Cooki...One Has To Go ???
Bear22012ZammyNew Member Introduct...New member
Sully5ZammyBBQ, Grilling, Cooki...One Has To Go ???
Motorcycle Mike3ZammyGeneral DiscussionDickey Betts Passed.
Motorcycle Mike3Motorcycle MikeGeneral DiscussionDickey Betts Passed.
stancotreau3stancotreauLehman TrikeLehman Storm rear brake pads
Motorcycle Mike3Jack KlarichGeneral DiscussionDickey Betts Passed.
oldschool4Jack KlarichHarley Trike Convers...Any Completed DNA Trike Kit Owners?
Burnerboy3Jack KlarichRoadsmith Trikes
...
Too Pa Pa Zook
ken g7Jack KlarichHarley Tri Glidereverse not working
Dragon3Jack KlarichStallion Trikeshelp
Sully5Jack KlarichBBQ, Grilling, Cooki...One Has To Go ???
ctdair7Jack KlarichHarley Tri GlideHot Rotors After New Pads
ctdair7Jack KlarichHarley Tri GlideHot Rotors After New Pads
rocket1lf2Jack KlarichStallion TrikesEverything Went To Heck
Bear22012Jack KlarichNew Member Introduct...New member
Bear22012rhino 2New Member Introduct...New member
Sully5rhino 2BBQ, Grilling, Cooki...One Has To Go ???
rocket1lf2rocket1lfStallion TrikesEverything Went To Heck
Dragon3Papa ZookStallion Trikeshelp
oldschool4oldschoolHarley Trike Convers...Any Completed DNA Trike Kit Owners?
ctdair7ctdairHarley Tri GlideHot Rotors After New Pads
Bear22012BigN69New Member Introduct...New member
Bear22012ol' schoolNew Member Introduct...New member
Bear22012hardwickbvNew Member Introduct...New member
TFNC9TFNCNew Member Introduct...Just saying hello
Bear22012Papa ZookNew Member Introduct...New member
Bear22012Bear220New Member Introduct...New member
ctdair7ROAD DOGHarley Tri GlideHot Rotors After New Pads
ctdair7ROAD DOGHarley Tri GlideHot Rotors After New Pads
ken g7KoolbreezeHarley Tri Glidereverse not working
Motorcycle Mike3Motorcycle MikeGeneral DiscussionDickey Betts Passed.
Dragon3DragonStallion Trikeshelp
Sully5SullyBBQ, Grilling, Cooki...One Has To Go ???
ken g7ken gHarley Tri Glidereverse not working
TFNC9SullyNew Member Introduct...Just saying hello
ken g7ken gHarley Tri Glidereverse not working
Burnerboy3Papa ZookRoadsmith Trikes
...
Too Pa Pa Zook
oldschool4Papa ZookHarley Trike Convers...Any Completed DNA Trike Kit Owners?
ctdair7ctdairHarley Tri GlideHot Rotors After New Pads
TFNC9Jack KlarichNew Member Introduct...Just saying hello
Rodnok11Jack KlarichNew Member Introduct...Hello Honda Trike owners!
paid4c430Jack KlarichHonda TrikesDifference in touring between two w...
paid4c48Jack KlarichHonda TrikesService for differential on a Motor...
ctdair7Jack KlarichHarley Tri GlideHot Rotors After New Pads
ctdair7Jack KlarichHarley Tri GlideHot Rotors After New Pads
Burnerboy3Jack KlarichRoadsmith Trikes
...
Too Pa Pa Zook
Burnerboy3BurnerboyRoadsmith Trikes
...
Too Pa Pa Zook
ctdair7Old Road DogHarley Tri GlideHot Rotors After New Pads
paid4c48BurnerboyHonda TrikesService for differential on a Motor...
paid4c430BurnerboyHonda TrikesDifference in touring between two w...
woody11Marc HMaggie Valley Gather...Maggie Valley 2024
Aurbo9Marc HYamaha TrikesV-Star 1100 Classic Trike project q...
TFNC9Marc HNew Member Introduct...Just saying hello
whiskeyneat8Marc HNew Member Introduct...Howdy"
TFNC9rhino 2New Member Introduct...Just saying hello
TFNC9Uncle FesterNew Member Introduct...Just saying hello
whiskeyneat8Uncle FesterNew Member Introduct...Howdy"
whiskeyneat8hardwickbvNew Member Introduct...Howdy"
oldschool4Jack KlarichHarley Trike Convers...Any Completed DNA Trike Kit Owners?
TFNC9hardwickbvNew Member Introduct...Just saying hello
ctdair7Jack KlarichHarley Tri GlideHot Rotors After New Pads
whiskeyneat8Jack KlarichNew Member Introduct...Howdy"
whiskeyneat8trike ladyNew Member Introduct...Howdy"
TFNC9ZammyNew Member Introduct...Just saying hello
whiskeyneat8ZammyNew Member Introduct...Howdy"
whiskeyneat8rhino 2New Member Introduct...Howdy"
Jack Klarich11oldschoolThoughts & Praye...Prayers
whiskeyneat8whiskeyneatNew Member Introduct...Howdy"
ctdair7ctdairHarley Tri GlideHot Rotors After New Pads
TFNC9trike ladyNew Member Introduct...Just saying hello
Jack Klarich11Jack KlarichThoughts & Praye...Prayers
Jack Klarich11Jack KlarichThoughts & Praye...Prayers
Aurbo9Jack KlarichYamaha TrikesV-Star 1100 Classic Trike project q...
GSHRIG4Jack KlarichHarley Trike Convers...DNA trike conversion
TFNC9Jack KlarichNew Member Introduct...Just saying hello
TFNC9TFNCNew Member Introduct...Just saying hello
GSHRIG4oldschoolHarley Trike Convers...DNA trike conversion
Aurbo9AurboYamaha TrikesV-Star 1100 Classic Trike project q...
oldschool4oldschoolHarley Trike Convers...Any Completed DNA Trike Kit Owners?
Jack Klarich11RKplus10Thoughts & Praye...Prayers
Jack Klarich11Phu CatThoughts & Praye...Prayers
woody11woodyMaggie Valley Gather...Maggie Valley 2024
woody11woodyMaggie Valley Gather...Maggie Valley 2024
woody11Motorcycle MikeMaggie Valley Gather...Maggie Valley 2024
Bouncer314TGHarley Tri GlideRebuilding A Tri Glide Reverse Moto...
woody11Marc HMaggie Valley Gather...Maggie Valley 2024
Bouncer3BouncerHarley Tri GlideRebuilding A Tri Glide Reverse Moto...
oldschool4Marc HHarley Trike Convers...Any Completed DNA Trike Kit Owners?
ISP-FL2Jack KlarichThe Knife EnthusiestBenchmade Warranty
Jack Klarich11Jack KlarichThoughts & Praye...Prayers
JTJersey7Jack KlarichHarley Freewheeler /...How Does The Turn Signal Know When ...
DK Custom Products362Jack KlarichHarley Tri GlideWhat did you do to Your Tri-Glide T...
DK Custom Products362Jack KlarichHarley Tri GlideWhat did you do to Your Tri-Glide T...
JTJersey7Phu CatHarley Freewheeler /...How Does The Turn Signal Know When ...
woody11PosseRiderMaggie Valley Gather...Maggie Valley 2024
paid4c430Jack KlarichHonda TrikesDifference in touring between two w...
oldschool4Jack KlarichHarley Trike Convers...Any Completed DNA Trike Kit Owners?
JTJersey7Jack KlarichHarley Freewheeler /...How Does The Turn Signal Know When ...
oldschool4oldschoolHarley Trike Convers...Any Completed DNA Trike Kit Owners?
DK Custom Products3621dn5upHarley Tri GlideWhat did you do to Your Tri-Glide T...
msocko354ol' schoolBBQ, Grilling, Cooki...A Little Outdoor Cooking
JTJersey7powerhaulicHarley Freewheeler /...How Does The Turn Signal Know When ...
Bouncer314TGHarley Tri GlideRebuilding A Tri Glide Reverse Moto...
paid4c430Papa ZookHonda TrikesDifference in touring between two w...
trikeguy749Jack KlarichHonda Trikesignition key
Phill Griggs2Jack KlarichTrike TravelSR. HOMIE EXPLORING OKLAHOMA
TXFIRE764Jack KlarichHonda TrikesNew to Trikes and needing a convers...
paid4c48Jack KlarichHonda TrikesService for differential on a Motor...
TXFIRE764Papa ZookHonda TrikesNew to Trikes and needing a convers...
Bouncer3Jack KlarichHarley Tri GlideRebuilding A Tri Glide Reverse Moto...
TXFIRE764TXFIRE76Honda TrikesNew to Trikes and needing a convers...
TXFIRE764Papa ZookHonda TrikesNew to Trikes and needing a convers...
paid4c48Papa ZookHonda TrikesService for differential on a Motor...
Bouncer3BouncerHarley Tri GlideRebuilding A Tri Glide Reverse Moto...
Phill Griggs2Phill GriggsTrike TravelSR. HOMIE EXPLORING OKLAHOMA
paid4c45RoadRunner18Honda Goldwing Gen3 ...3000 mile Differential CSC service
TXFIRE764BrokenBackJackHonda TrikesNew to Trikes and needing a convers...
woody11Motorcycle MikeMaggie Valley Gather...Maggie Valley 2024
paid4c48skisnow806Honda TrikesService for differential on a Motor...
GPz11006TXFIRE76Honda TrikesHonda Valkyrie Conversions
GPz11006GorillaHonda TrikesHonda Valkyrie Conversions
TXFIRE764TXFIRE76Honda TrikesNew to Trikes and needing a convers...
Jack Klarich3SullyGeneral DiscussionToday
Jack Klarich3KrazeehorseGeneral DiscussionToday
GPz11006TXFIRE76Honda TrikesHonda Valkyrie Conversions
Likes Likes:  26
Thanks Thanks:  1
Page 2 of 3 FirstFirst 1 2 3 LastLast
Results 21 to 40 of 53

Thread: Intermittent electrical

  1. #21
    30+ Posts
    Join Date
    Oct 2021
    Location
    Cleveland Texas USA
    Posts
    30
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Battery

    I do have a Haynes manual..my next move is to go from switch onward see what is going on.

  2. #22
    18000+ Posts
    Tech Contributor
    Gold Club Member
    Jack Klarich's Avatar
    Join Date
    Oct 2016
    Location
    Jax, Fla USA
    Posts
    18,231
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default

    Quote Originally Posted by Clevelandpat View Post
    I do have a Haynes manual..my next move is to go from switch onward see what is going on.
    Good luck. Electrical is a real pain sometimes

    You have a good plan, by elimination you should get it
    Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
    Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL

  3. #23
    30+ Posts
    Join Date
    Oct 2021
    Location
    Cleveland Texas USA
    Posts
    30
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default The sga

    Ok. Looks like I had a couple corroded connections and the power issue is corrected. Engine cranks good but no start. No spark at plugs. Center wire to coil has power but nothing coming from coils. I read some other posts of a possible angle sensor. Where is it located? Any ideas?

  4. #24
    18000+ Posts
    Tech Contributor
    Gold Club Member
    Jack Klarich's Avatar
    Join Date
    Oct 2016
    Location
    Jax, Fla USA
    Posts
    18,231
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default

    Quote Originally Posted by Clevelandpat View Post
    Ok. Looks like I had a couple corroded connections and the power issue is corrected. Engine cranks good but no start. No spark at plugs. Center wire to coil has power but nothing coming from coils. I read some other posts of a possible angle sensor. Where is it located? Any ideas?
    If you follow the link in post 11 it will show you how to scan your ECM for codes, if your sensor is bad it should show a code

    Most trouble codes I have seen are related to crank or cam sensors, they will kill your spark

    Good on you for finding your cranking problem, stay with it and you will figure it out
    Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
    Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL

  5. #25
    18000+ Posts
    Tech Contributor
    Gold Club Member
    Jack Klarich's Avatar
    Join Date
    Oct 2016
    Location
    Jax, Fla USA
    Posts
    18,231
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default

    Quote Originally Posted by Clevelandpat View Post
    Ok. Looks like I had a couple corroded connections and the power issue is corrected. Engine cranks good but no start. No spark at plugs. Center wire to coil has power but nothing coming from coils. I read some other posts of a possible angle sensor. Where is it located? Any ideas?
    I believe the sensor is part of the turn signal module

    That should turn up a code when you scan the ECM follow post #11 to scan for codes
    Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
    Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL

  6. #26
    30+ Posts
    Join Date
    Oct 2021
    Location
    Cleveland Texas USA
    Posts
    30
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Working

    Ok I found sensor connection at the module and tested sensor..1st test was .5.2nd test was 4.5 3rd 1.0. The connector seemed loose so I reassembled and it seemed secure. Bike starts right up and idles good..does not die in a few seconds like it did prior. I also went to the speedometer reset and read code d01clr. Is that code good? Thanks for all your help.

  7. #27
    3750+ Posts
    Gold Club Member
    PosseRider's Avatar
    Join Date
    Jan 2016
    Location
    Dayton, Ohio
    Posts
    3,910
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by Clevelandpat View Post
    Ok I found sensor connection at the module and tested sensor..1st test was .5.2nd test was 4.5 3rd 1.0. The connector seemed loose so I reassembled and it seemed secure. Bike starts right up and idles good..does not die in a few seconds like it did prior. I also went to the speedometer reset and read code d01clr. Is that code good? Thanks for all your help.
    Glad you found the culprit & thanks for letting us know.
    2020 TriGlide Tahitian Teal aka (Hawaiian Hussy). Avon frt & Comfortred rear tires. ProAction frt & rear susp. RZ seat. DK floorboard extension & rear axle retainer kit with EBS, HD pull -back bars. Custom Dynamics front turn signals & Vent grill. All ,HD "Edge Cut " accessories.

  8. #28
    18000+ Posts
    Tech Contributor
    Gold Club Member
    Jack Klarich's Avatar
    Join Date
    Oct 2016
    Location
    Jax, Fla USA
    Posts
    18,231
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default

    Good on you for sticking with it, I do not see your final code on a list

    The proof will be in the running of your Trike, good luck
    Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
    Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL

  9. #29
    18000+ Posts
    Tech Contributor
    Gold Club Member
    Jack Klarich's Avatar
    Join Date
    Oct 2016
    Location
    Jax, Fla USA
    Posts
    18,231
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default

    Quote Originally Posted by Clevelandpat View Post
    Ok I found sensor connection at the module and tested sensor..1st test was .5.2nd test was 4.5 3rd 1.0. The connector seemed loose so I reassembled and it seemed secure. Bike starts right up and idles good..does not die in a few seconds like it did prior. I also went to the speedometer reset and read code d01clr. Is that code good? Thanks for all your help.
    Update on your code, it is a speedometer code that checked the speed sensor showing the code is clear.

    I have not seen this list of codes before. The early 1999-03 bikes had some strange codes and a totally different way to check them. Go back to post 11 for info on that, or possible your Clymer or Haynes manual shows that.
    Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
    Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL

  10. #30
    30+ Posts
    Join Date
    Oct 2021
    Location
    Cleveland Texas USA
    Posts
    30
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Code

    D01cLR...clear correct?

  11. #31
    18000+ Posts
    Tech Contributor
    Gold Club Member
    Jack Klarich's Avatar
    Join Date
    Oct 2016
    Location
    Jax, Fla USA
    Posts
    18,231
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default

    Quote Originally Posted by Clevelandpat View Post
    D01cLR...clear correct?
    Yes
    Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
    Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL

  12. #32
    30+ Posts
    Join Date
    Oct 2021
    Location
    Cleveland Texas USA
    Posts
    30
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Back to the drawing board.

    I thought I had issue figured out but I guess not. Took bike down to the corner and back and it died. Light out everything dead. 5 to 10 seconds later everything comes on..it will crank. Backfire..run good about 5 to 10 seconds and die again. I believe it's that sensor as some of you thought. Anything else you can think of?

  13. #33
    18000+ Posts
    Tech Contributor
    Gold Club Member
    Jack Klarich's Avatar
    Join Date
    Oct 2016
    Location
    Jax, Fla USA
    Posts
    18,231
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default

    Do you have a check engine light on?

    The problem you continue to have sure sounds like a crank sensor, it surely should show up on a diagnostic scan as low or no output
    Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
    Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL

  14. #34
    30+ Posts
    Join Date
    Oct 2021
    Location
    Cleveland Texas USA
    Posts
    30
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default CEL

    Yes cel is illuminated..dealer didn't have one the other day suppose to be in on Wednesday.

  15. #35
    18000+ Posts
    Tech Contributor
    Gold Club Member
    Jack Klarich's Avatar
    Join Date
    Oct 2016
    Location
    Jax, Fla USA
    Posts
    18,231
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default

    Quote Originally Posted by Clevelandpat View Post
    Yes cel is illuminated..dealer didn't have one the other day suppose to be in on Wednesday.
    Have you checked the wires to the sensor? They do sometimes break from vibration, tho I am leaning more to the pick up coil in that sensor has shorted

    Good luck and do check back in when your problem is fixed
    Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
    Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL

  16. #36
    30+ Posts
    Join Date
    Oct 2021
    Location
    Cleveland Texas USA
    Posts
    30
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Wiring

    Seems to be inorder. Kind of a pain to get to by that filter. Anything special I need to know installing?

  17. #37
    18000+ Posts
    Tech Contributor
    Gold Club Member
    Jack Klarich's Avatar
    Join Date
    Oct 2016
    Location
    Jax, Fla USA
    Posts
    18,231
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default

    Quote Originally Posted by Clevelandpat View Post
    Seems to be inorder. Kind of a pain to get to by that filter. Anything special I need to know installing?
    Lube the new O ring, check the torque value of the bolt in your manual, a bit of dilectric grease on the wire connection will be a plus
    Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
    Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL

  18. #38
    30+ Posts
    Join Date
    Oct 2021
    Location
    Cleveland Texas USA
    Posts
    30
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Sensor

    One question.. Will that failed sensor cause the electrical system to completely go blank. This bike will start and run 5 to 10 sec then quit. No lights no nothing. Wait about 10 seconds the lights come back on.

  19. #39
    18000+ Posts
    Tech Contributor
    Gold Club Member
    Jack Klarich's Avatar
    Join Date
    Oct 2016
    Location
    Jax, Fla USA
    Posts
    18,231
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default

    Quote Originally Posted by Clevelandpat View Post
    One question.. Will that failed sensor cause the electrical system to completely go blank. This bike will start and run 5 to 10 sec then quit. No lights no nothing. Wait about 10 seconds the lights come back on.
    I have not seen that, electrical problems have a cursed past.

    Check your wires on the starter, make sure you have good and clean connections. Also pull you main fuse and clean the connections just for grins

    Anything is possible under the right conditions
    Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
    Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL

  20. #40
    30+ Posts
    Join Date
    Oct 2021
    Location
    Cleveland Texas USA
    Posts
    30
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Starter?

    When the bike acts up as I said "the lights go out" literally. It's like you turn switch off. You wait a few moments and everything comes back. It will start and run a few moments and stops again. One thing when that happens it sometimes backfires trying to restart.

Page 2 of 3 FirstFirst 1 2 3 LastLast

Similar Threads

  1. Intermittent Engine Stall, Shutdown
    By TejasRanger in forum Harley Freewheeler / Road Glide 3
    Replies: 2
    Last Post: 04-30-2021, 04:05 PM
  2. Intermittent starting problem
    By Stalloin 146 in forum Stallion Trikes
    Replies: 2
    Last Post: 09-09-2011, 05:44 AM
  3. electrical problem, volt meter in 12v range
    By silverdevil in forum Stallion Trikes
    Replies: 8
    Last Post: 03-12-2010, 11:50 PM
  4. Electrical Problem - Blowing Fuse
    By patriot in forum Honda Trikes
    Replies: 12
    Last Post: 10-15-2009, 08:50 AM
  5. Electrical Woes
    By Ozarkryder in forum Honda Trikes
    Replies: 5
    Last Post: 06-15-2009, 08:54 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •