Anyone know where I should look for a vacuum leak?
Anyone know where I should look for a vacuum leak?
Last edited by rhino 2; 04-03-2022 at 02:21 PM.
Sometimes a Cigar is Just a Cigar.....
2019 Tri-Glide.......
Hi Gail, Welcome to Trike Talk
You can spay some aerosol like carb spray around suspect hoses, if your engine speed increases you have found your leak
Look closely @ any and all hoses around the intake manifold, use a slight bending motion to check to see if the engine speed increases, if you have cruise control check if it has a hose also
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL
Hi Gail what exactly is the issue? If it idles but will not accelerate one common problem was the air intake. With age and heat it cracks and allows to puch air in the the MAP sensor does not see. Let us know. there is a solution posted in the Stallion section of the site. If you can not find it or have questions make a post.
Stallion #406 // 2013 Tri-Glide
Here is the thread Ted is talking about, this is a common problem with air intakes like this
https://www.triketalk.com/forum/thre...e-Plenum-Break
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL
My stallion runs. It idles rough upon acceleration and also lost the vacuum to the power brakes. It sat for a year during COVID times.
Where is the vacuum canister located? Anyone know? Maybe there isn’t one.
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL