Hello, new member here. I am building a custom trike, I am considering the DNA axle, can anyone give me the dimensions of the blocks on the axle with the two holes? I'll post a picture describing what I need.
Hello, new member here. I am building a custom trike, I am considering the DNA axle, can anyone give me the dimensions of the blocks on the axle with the two holes? I'll post a picture describing what I need.
Also need these dimensions for the mounting plate on the swingarm:
Nobody knows?
I don't have the funds for the rear axle yet. I am building the frame and using a go-kart axle temporarily so I can roll it around, and load it on a trailer. When the time comes, I want to be able to bolt the new axle in place.
It's not a MAJOR job to modify it later. But it would be so nice to just bolt it up when the time comes if I could just get a couple simple measurements. I talked to a tech at DNA And he had a couple measurements but not all. I'd even buy a mounting bracket if I could. There are a lot of these things out and about owned by forum members according to my searches. I'd even pay somebody for their time to take the measurements.
You are out of my league.
I did see this Question posted under the Home Built Trikes at the bottom of your post ... search for this thread ...
Need DNA rear axle dimension.
Maybe something in there you will help you or find a person who knows more than me about DNA,
Last edited by DVS; 04-27-2022 at 09:16 AM. Reason: corrected group title
might check this out less than 1/2 the price
https://www.dnaspecialty.com/products/trike-axle
Sorry I just now saw this, thanks for the response. I have since decided to build my own chain drive rear with an automotive diff. I looked at your site, nice work!