I bought my 2014 TG from a person that didn't do well keeping up maintenance. I need to flush the clutch fluid. I can't get the decorative slave cylinder cover off the end of the transmission to get at the bleeder.
I've moved clamps, removed the heat shield/beauty cover, and exhausted my knowledge of foul language fighting this thing. Still the two bolt head dimples on the bottom of the cover won't clear the header pipe off of the rear cylinder.
Two questions:
1) Does the exhaust header have to be disconnected at the rear cylinder exhaust?
2) Is there an after market cover that will eliminate this problem?
TIA for helpful suggestions.