Steering is too hard on 2010 goldwing with roadsmith conversion

[Boomerang]

I am new to a trike and the steering I think is way too hard roadsmith raked front when it was triked bike only has 7000 miles on it have tried different tire pressure and air sup.ride but has not done a lot of good, any suggestions. I have rode 2 wheelers since 1967 don't think I am going to like riding trike.

[tourman]

Give Road Smith a call and see what they suggest

[Gorilla]

Jimmy a slight possibility that the steering stem was over torqued. The torque should be 40lbs. One test is slightly lift the front so front tire can just swing but not higher. Pull it all the way in one direction. Let go and see if it swings. It should swing back most of the way in the other direction. If it does not move or moves less than back to Stright I would bet on the over tightened stem.

[stacebg]

I am new to a trike and the steering I think is way too hard roadsmith raked front when it was triked bike only has 7000 miles on it have tried different tire pressure and air sup.ride but has not done a lot of good, any suggestions. I have rode 2 wheelers since 1967 don't think I am going to like riding trike.

how many degrees in the tree?

[BIG DENNY]

I am new to a trike and the steering I think is way too hard roadsmith raked front when it was triked bike only has 7000 miles on it have tried different tire pressure and air sup.ride but has not done a lot of good, any suggestions. I have rode 2 wheelers since 1967 don't think I am going to like riding trike.

Call Randy and have him get you a 6% rake KIT

[Burnerboy]

We haven't heard anything more from the poster............ How did you make out with the hard steer'n on your trike??? and what did you do to help out with your problem or concern??

I sure there's many other's on this board that would be interested in learn'n or try'n, cause they also have the same problem(s)

Ronnie

9/23/22