My method for refilling gear oil

[Leaky Waders]

Having recently purchased a used 2019 Gl 1800 Tour DCT with a CSC conversion and determining that the gear oil was due to be drained and refilled I reviewed the owner's manual. I preferred to not have to remove the right rear tire so I searched the internet for an alternative method. I did not find what I was searching for so I called CSC and spoke with Will in service who said he developed a technique on draining and refilling the gear oil without removing the tire. He did not go into details and I did not ask for any but figured if he developed a technique so could I.

My father used to say "Don't throw anything away, there will be a use for it". He was far from a hoarder and his basement looked like an ACE Hardware store. With this in mind I found a section of clear plastic tubing with a 1/4" ID that fit on the end of the gear oil bottle tip. I ran the tubing between spokes on the wheel and above the hub and inserted the end of the hose inside the fill hole. Gravity did the rest and there was no waste or mess.

[Pegasus1300]

I don't ride a Goldwing or any trike conversion,but thank you for posting your work around. It is ideas like this that these forums so great. Thank you from Spyder Rider

[BrokenBackJack]

You can get pumps on Amazon with plastic hoses on it.

They make different sizes for different size jug openings so you can screw it onto the jug.

Pump away for spots where you can't use the gravity method.

[Burnerboy]

Thank you Leaky, that's an excellent idea, My next gear change will be done your way for sure..

Ronnie

2/10/23