What’s the mounting difference in bagger slipons and trike slipons?
What’s the mounting difference in bagger slipons and trike slipons?
Baggers are easy to see and remove from the rear mounts, trikes are not as forgiving, they mount under the body and the bolts are in a not very user friendly spot, take a look at yours, you will see in a minute
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL
When the m8 baggers first came out the inlet on the muffler on the right side was much larger than the trike, on the later model trikes 2020 and up I don't know if the inlet on the trike was increased or not. The rear mounts are the same.
Without the additional adaptation pipe and some trimming, you’ll need the pre M8 mufflers, on the twin cams
There is no difference at all in the design or length, but the larger diameter slipons (4 - 4 1/2") that will fit on any bagger with no clearance issues, may not not clear the lower body cutouts on some trike bodies. In some cases, the larger diameter slipons will fit, but not in all. It varies from manufacturer to manufacturer.
SORE SHOULDERS?
Get The Right Cure
TriGlide Rake Solutions
Get Info HERE
Support YOUR Trike Talk Forum Community & Get Upgraded Features & Free Merch with a Gold Club Membership!
Click Here For Information
Visit Cut-N-Shoot Customs Website
Text or Call Papa: (346) 800-7946
Email: info@cutnshootcustoms.com[/B]
Isn't there also a difference in inlet size?
SORE SHOULDERS?
Get The Right Cure
TriGlide Rake Solutions
Get Info HERE
Support YOUR Trike Talk Forum Community & Get Upgraded Features & Free Merch with a Gold Club Membership!
Click Here For Information
Visit Cut-N-Shoot Customs Website
Text or Call Papa: (346) 800-7946
Email: info@cutnshootcustoms.com[/B]
Vance and Hines makes a set of slip-ons specifically for the trikes and they are made for left and right. the mounting brackets are on the side of the mufflers. there is a bracket that mounts to the Harley mounts and the mufflers mount to it. They have a smaller opening (about a 3 inch oval) for the exhaust that is offset giving a couple more inches of ground clearance.
SORE SHOULDERS?
Get The Right Cure
TriGlide Rake Solutions
Get Info HERE
Support YOUR Trike Talk Forum Community & Get Upgraded Features & Free Merch with a Gold Club Membership!
Click Here For Information
Visit Cut-N-Shoot Customs Website
Text or Call Papa: (346) 800-7946
Email: info@cutnshootcustoms.com[/B]