I have a 2004 Goldwing1800 with Lehman Monarch II kit. The kit was installed on 4/16/2005.
Does anyone have a part number and source for new axle shaft seals or photos of the correct seals. I’m desperate for any help. Thanks.
Likes: 1
Thanks: 1
Lehman Monarch II
I have a 2004 Goldwing1800 with Lehman Monarch II kit. The kit was installed on 4/16/2005.
Does anyone have a part number and source for new axle shaft seals or photos of the correct seals. I’m desperate for any help. Thanks.
Hang in there someone may help shortly after they read your post. Not very many Lehman's out there.Originally Posted by Donnimac
Stallion #406 // 2013 Tri-Glide
Supposedly on the Monarch II the rear axle is the same as the Ford Pinto and Ford mustang II. Seals and other parts are available at Napa or autozone and Advance. Sadly you cant get rotors or brake pads at these places.
http://www.mustangii.org/decoder/axle/
Thanks for the information.
👍
Champion and especially Leman trikes are difficult to get parts for. Because of that, many shops will no longer work on them. Basically they take up vaulable shop space hopping to get parts. In the mean time, they're stuck where they sit.
As for your axle, there are specialty companies that specilize in making axles. Apparently there is a large business in doing so, and I think much of it comes from the race world. Anyway, I too once needed one for a Leman trike and sent the axle off Moser Engineering.
https://www.moserengineering.com/
Please keep in mind that anytime I share or give advice about a motorcycle, unless I state otherwise, I am always referring to GL1800's and no other.
Posting Permissions
