tmigala
I had discount tire mount the tire, I took the wheel off and put the wheel back on.
had lots of fun taking the wheel off cause the axle was way to tight, the bearings ID was smaller than the axle OD.
thanks to Kevin at TBMS that problem was taken care of.
also had lots of fun putting the wheel back on. one of the bolts that go into the fork tubes (down tubes) needs to be modified, only one, you will have no problems putting the first one in but when you go to do the 2nd one you will have lots of fun unless you modify it, then it is easy.
I also have a complete list of the tools needed, some metric and some ASE.