putting trike kit on 2001 ultra. can anyone help with the rear lite wiring connections or diagram?
putting trike kit on 2001 ultra. can anyone help with the rear lite wiring connections or diagram?
Welcome to TrikeTalk, beeswax!
What brand of trike kit are you using?
Trike Talk Membership Map
No matter the storm, when you are with God, there is always a rainbow waiting.
http://i440.photobucket.com/albums/q...andana-1-1.jpg
I have an american trike kit
The kit came with two led taillites they are multi leds on a circuit board. they each have three wires red .green and back. the bike has the stock harness. I have idetified the wires on the bike and can get all functions but only one at a time.when I try to add say brake lite to running the all go out.
Sometimes if they are using a foreign lite the wires are not what we would think they should be. Try and see if the green is the ground instead of the black.
Stallion #406 // 2013 Tri-Glide
You already know the green is ground. It must be connected to the frame using a star washer for good contact.
The black and red are either running light or turn/stop.
If I remember correctly... black is turn/stop and red is for the running lights. Just hook one up and you will see. It won't blow a fuse.