Bike jacks

[screwball]

Because we had 2 wheelers for a very long time we have 2 bike jacks. Now that we are a trike family, the jacks seem useless. I can lift the front or back, but not the whole bike. Too much 'stuff' in the way at the balance point. Am I doing something wrong? Can't seem to come up with a 'fix' and I'm not sure if I want to spring for a lift table.

Suggestions!!??

 

[Mr.Wizard]

Had the same issue...

Got a set of jack stands and they worked just fine. Jack up the back, hitch up the stands then lift the front.

Problem was I got tired of working on my knees (all dirty minds, shut up )

Trike lift is about 900 bucks complete so I sprung for it. No trike now but it holds two wheels just fine and the full trike wings that came with mine help hold the bike up until I set a center jack and straps.

Here's one similar to mine. Atlas XLT 1500 - Greg Smith Equipment Sales, Inc

I use it for my riding mower, ATV and to jack up the wifey when she's bad. LOL

 

[1550vt]

Wizard.....we ALL know who has hold of the jack-handle....and it ain't you.

I just use to jack mine up one side at a time and put stands under it. I am a glutton for punishment and just loved to crawl around under there and do stuff. Wizard...being a weenie...sprung for the lift.

Screw.....just be careful around the oil-pan trying to use any lift.

 

[Mr.Wizard]

Thanks VT... you're great for a guys ego, ya know..

 

[msocko3]

Had the same issue...

Got a set of jack stands and they worked just fine. Jack up the back, hitch up the stands then lift the front.

Problem was I got tired of working on my knees (all dirty minds, shut up )

Trike lift is about 900 bucks complete so I sprung for it. No trike now but it holds two wheels just fine and the full trike wings that came with mine help hold the bike up until I set a center jack and straps.

Here's one similar to mine. Atlas XLT 1500 - Greg Smith Equipment Sales, Inc

I use it for my riding mower, ATV and to jack up the wifey when she's bad. LOL

After working off a jack and now a table lift, I'm glad I have a table lift to work off of.

 

[screwball]

I've been thinking the same thing. Think I'll start hinting big time for a lift table at Christmas.

 

[msocko3]

I've been thinking the same thing. Think I'll start hinting big time for a lift table at Christmas.

There you go, I'll bet Santa will be good to you.

 

[Saltywheels]

Tell Santa to look into Harbor Freight!! Price is right too!

 

[msocko3]

Tell Santa to look into Harbor Freight!! Price is right too!

Got to have a lift with a minimum of 1500 lb capacity, last time I looked at Harbor freight they were 1,000 lb capacity.

 

[krw]

Had the same issue...

Got a set of jack stands and they worked just fine. Jack up the back, hitch up the stands then lift the front.

Problem was I got tired of working on my knees (all dirty minds, shut up )

Trike lift is about 900 bucks complete so I sprung for it. No trike now but it holds two wheels just fine and the full trike wings that came with mine help hold the bike up until I set a center jack and straps.

Here's one similar to mine. Atlas XLT 1500 - Greg Smith Equipment Sales, Inc

I use it for my riding mower, ATV and to jack up the wifey when she's bad. LOL

I just purchased the Atlas 1500 high rise. Works great and helps my back while working on the tri glide.

I bought two small scissor jacks from harbor freight. $14.99 on sale. Fits in tight places.

 

[flatfrog]

Check out J&S Jacks. They have a jack called the Big Wheek Jack and they claim it will\lift any Harley.
Motorcycle Lifts

 

[flatfrog]

Thjats "Big Wheel Jack. sorry

 

[cewhit1]

That Big Weel Jack won't lift up a Tri Glide, front and rear at the same time. I use a Motorcycle jack to raise the front and a floor jack for the rear. Works great.

 

[trikermutha]

I wonder if this neat lift will work..

Single Post ATV, Motorcycle, Snowmobile, Golf Cart Lift American Made

 

[msocko3]

I wonder if this neat lift will work..

Single Post ATV, Motorcycle, Snowmobile, Golf Cart Lift American Made

Looks like a neat lift.

 

[41inWV]

Here's the lift I use. Bought the Pitbull for my two wheel Ultra, then when I got the triGlide I contacted Pitbull and sure enough, they have adapter for several models. Basically the adapter hooks over the lift rail and supports the trike at the frame under the transmission.
Works Super !

http://www.pitbullmotorcyclelifts.com/gallery/main.php?g2_itemId=29

 

[trikermutha]

Here's the lift I use. Bought the Pitbull for my two wheel Ultra, then when I got the triGlide I contacted Pitbull and sure enough, they have adapter for several models. Basically the adapter hooks over the lift rail and supports the trike at the frame under the transmission.
Works Super !

TRIKE ON A PITBULL MOTORCYCLE LIFT

you got pictures of the adapter??

 

[Tonyd]

Check out J&S Jacks. They have a jack called the Big Wheek Jack and they claim it will\lift any Harley.
Motorcycle Lifts

SORRY TO say I have a j&s wont lift a trike....Im tryin to sell it now 250 good price

 

[41inWV]

trikermutha
I'll take a picture of it for you, pretty simple piece....just need one critical angle iron piece for catching the rail. I'll take a picture later today and post it.

 

[mtn rider]

I had the same problem after triking my bike. I found that the ramps I used for the car worked very well for the trike.( I use 3 ramps) Just drive up on them and you can change oil and filter very easy.It puts the bike about a foot up and very stable. I guess if you wanted it would be very easy to then use your m/c jack to go up onto jack stands. Just my 2 cents.