When I bought this trike the rotors were pretty scored up so I'm going to need a new set. Does anyone know what cars these rotors fit, it's not a Civic CRX thats for sure.
When I bought this trike the rotors were pretty scored up so I'm going to need a new set. Does anyone know what cars these rotors fit, it's not a Civic CRX thats for sure.
Call into Hannigan and talk to Jim Gooch. The rotors for the RSV are "hybrid" and are a Hannigan proprietary part. Should you wish, his direct email is jim.hms@apex.net However, I highly suggest calling as a first choice of contact with Jim. His plethera of responsibilities and duties render timely email exchanges somewhat lacking regardless of his honorable intentions and commitment to exemplary customer service.
Thanks, I'll quit searching the catalogs then and give Jim a call. While we're on the subject of brakes, do you have any basis of comparison between the Brembo pad and the EBC FA47HH ? The EBC is a replacement for the Brembo pad and after talking with the local Ducati service dept. they say many people prefer the EBC because they have better stopping power. He said he sells lots of them to 3 wheeled riders. Many Ducati's and Moto-Guzzi's use the Brembo brakes.
Is there an upgraded rotor & caliper we could use to increase braking power when towing a trailer ? The stock setup doesn't have much braking surface to haul down a 2up trike pulling a trailer. Seems it would overheat the brakes. All this may be a moot point because I have not yet run 2 up with a trailer, so am I worrying about nothing ?
Definitely questions to ask Gooch as well. Hannigan has done extensive testing of numerous caliper-rotor-pad combinations and seem to have discovered the optimal assembly to accomodate safety and performance for all facets of operations regarding the RSV trike.
Jim is for sure the one to ask on this,,,,,
I have no problem stopping pulling my camper @700+ pounds. I can lock up the back tires with no problems at all, with what it comes with brake wise.
Motor Trike Service Manual Completed 5-3-08
http://www.junkmaster.com/kj5ix/MTServiceManual.pdf
That sounds like a glowing endorsement for what's on there. The trailer I pull is nowhere near 700# so I guess I should have no problems . Thanks for sharing that.