scuba1954
New member
I just added some Harley Logo lights to my trike to light up the ground in front of my rear tires. Just added the logos with some of the different colors showing on my trike.
Harley Logo illuminated on ground
- Thread starter scuba1954
- Start date
I just added some Harley Logo lights to my trike to light up the ground in front of my rear tires. Just added the logos with some of the different colors showing on my trike.
DK Custom Products
Sponsor
Very cool. I saw something like that (not nearly as nice) a few years ago.
Care to share the details on how it works?
Kevin
Care to share the details on how it works?
Kevin
56Elwood
250+ Posts
Here's one source, there are others
http://www.buy4car.com/products/led...ector-lamp-for-harley-davidson-1400-1622.html
http://www.buy4car.com/products/led...ector-lamp-for-harley-davidson-1400-1622.html
scuba1954
New member
- Thread starter
- #4
I bought them from Headlight Revolution for $72 a pair. I had some Stainless L brackets made and used 3M double stick tape and attached them to the inside of my rear fenders. It confuses people when they see them because the logo actually looks like it is projecting one side under the tire. I had looked at a lot of logo lights and found these which use a cree led which are a high quality led.
FuzzyWuzHe
New member
RickDeVon
New member
Thanks for the clue to mounting...I got a pair for my birthday...how did you wire then in...
DK Custom Products
Sponsor
Thanks guys. Not sure I'll do it...I've never run any highlight lights on any bike, nor felt the urge to. But those things are just so cool I might do it.
Kevin
scuba1954
New member
- Thread starter
- #8
The logo lights only come in one set off colors, orange and black with white letters. My leds change colors which make the logo lights look different depending on background colors.
Far as wiring I have my leds connected to a switch that is hot all the time. I tapped into that switch so I can have the lights on without needing the trike to be in accessory mode.
Far as wiring I have my leds connected to a switch that is hot all the time. I tapped into that switch so I can have the lights on without needing the trike to be in accessory mode.
Charlie in nc
New member
Logo lights
I bought a set of the ones that has the blue oval and put them under my running boards on our model A Really look COOL when at a stoplight!!
I bought a set of the ones that has the blue oval and put them under my running boards on our model A Really look COOL when at a stoplight!!
HarleyPap57
New member
Now this is pretty cool looking. May have to do something like this to mine
Would you happen to have a picture of the bracket you had made?
scuba1954
New member
- Thread starter
- #12
No pics but it is a simple piece of metal that was bent 90 degrees to make an "L" The top of the bracket is about 1" above the light housing and the Width is about 1/4" wider on each side than the light housing. I spray painted it black and used 3M double stick tape to hold it in place. It is in the center of the inside of the front edge of the rear fender about 2" up from the bottom of the fenders edge.
Welcome to the Trike Talk Community
Join our vibrant online community dedicated to all things Trikes! Whether you're a seasoned rider or just starting out, this is the place to share experiences, tips, and stories about your three-wheeled adventures. Explore modifications, maintenance advice, and rides, all while connecting with fellow trike enthusiasts from around the globe
Forum statistics
Trike Talk Community
Welcome to a community dedicated to the most diverse and fastest growing powersports segment, Motorcycle Trikes. Come join the discussion about the best makes and models, popular modifications and proven performance hacks, trike touring and travel, maintenance, meetups and more!
Register Already a member? LoginForum statistics
Share this page
