Parking brake

First I would check for any codes. Next I would adjust the brake cable.Check the connector for damage or corrosion. Next I would adjust the sensor gap. Gap at end of sensor and magnet should be .177-.197.Disconnect sensor connector.Loosen jamnut. Turn sensor and adjust gap. If that dosnt do it I would replace the sensor and magnet.
 
First I would check for any codes. Next I would adjust the brake cable.Check the connector for damage or corrosion. Next I would adjust the sensor gap. Gap at end of sensor and magnet should be .177-.197.Disconnect sensor connector.Loosen jamnut. Turn sensor and adjust gap. If that dosnt do it I would replace the sensor and magnet.

All.of the above. But it most likely being the gap. I'd start there. If you had a CEL you know you had a code. No CEL. Not likely to see anything.
 

Welcome to the Trike Talk Community

Join our vibrant online community dedicated to all things Trikes! Whether you're a seasoned rider or just starting out, this is the place to share experiences, tips, and stories about your three-wheeled adventures. Explore modifications, maintenance advice, and rides, all while connecting with fellow trike enthusiasts from around the globe

Forum statistics

Threads
55,513
Messages
901,377
Members
22,559
Latest member
Semiringeye

Trike Talk Community

Welcome to a community dedicated to the most diverse and fastest growing powersports segment, Motorcycle Trikes. Come join the discussion about the best makes and models, popular modifications and proven performance hacks, trike touring and travel, maintenance, meetups and more!

Register Already a member? Login

Forum statistics

Threads
55,513
Messages
901,377
Members
22,559
Latest member
Semiringeye
 photo 260e2760-d89e-45b2-8675-2bc26fb3d465.jpg

 photo Trike-Talk-150-x-200.gif

 photo DK Trike Talk Right side banner 19.jpg

Merziere Reverser

 photo 9796095c-0d4b-4a9b-88ed-efe4c498d084.png
 photo f9866e4e-75c5-471a-86f5-5e72a446ecc3.png
Back
Top