2011 SE5 seat lift cylinder

[2006gold]

FYI: Mine quit, Didn't want to wait for dealers to order. Replaced with Stabilus P/N SG359010 from PEP Boys. Works perfectly and was less expensive than OEM from dealers and what I could find on line.

Should have added that the P/N given above will replace CanAm P/N 708000479

 

[trikermutha]

do you think it can handle a heavier seat than stock?

 

[2006gold]

Possibly, but I found several units in the same barrel size, length, and hole size which varied in their resistance to being pushed down. I chose one which lifted the seat quickly, but could be pushed back down easily also. Since they are easy to install, you could try different pressures to find one suitable.

 

[trikermutha]

Possibly, but I found several units in the same barrel size, length, and hole size which varied in their resistance to being pushed down. I chose one which lifted the seat quickly, but could be pushed back down easily also. Since they are easy to install, you could try different pressures to find one suitable.

Thanks ThumbUp