Tri Glide rear wheels

[Mykneesbehurtin]

Does anyone know what the offset is for the rear wheels on a 09 thru 16 Tri Glide.

 

[1dn5up]

15x5.5 - 2.85 offset/backspace - 4x108mm bolt patern.
1979-93 Ford Mustang had same bolt pattern.
From what I understand, you can squeeze a 15x7 wheel with 3.5 back space with a 205 tire. No I have not done it. I like the oem wheel. Not many choices that I have found fit. Centerline # 8065806442 . That's all I can help with.

 

[Trampas]

Always thought of rear wheels also, but then I like to have all the same and trying to find a front to match the rear would be very hard without doing a custom built one which would cost quite a bit. Guess I will stay with what I have for now.


All for now Trampas

 

[Mykneesbehurtin]

Thank you.

 

[clint44]

Does anyone know what the offset is for the rear wheels on a 09 thru 16 Tri Glide.

Stock wheels are 15x5.5. Offset is -9mm which equates to 2.83" backspace.
There are lots of wheels out there in a 6" or 7" width,that can be ordered in the correct backspace and bolt pattern.

 

[clint44]

Always thought of rear wheels also, but then I like to have all the same and trying to find a front to match the rear would be very hard without doing a custom built one which would cost quite a bit. Guess I will stay with what I have for now.

A set of Performance Machine or RC Component wheels will cost you around $3K or more. Both companies build what are considered "bike" wheels, nothing automotive.

My front wheel is a forged 18x3.5 bike wheel and the rears are 17x7 billet automotive wheels that I had built to my specs. Total cost was around $1,800.

 

[Trampas]

For those prices that Clint44 posted, sounds like the harley rims would be the cheapest to get, my dealer told me the rims that harley has are built in Austratia (sp), that what he said and also said they are just as good as the aftermarket plus cheaper, just my take on it



All for now Trampas

 

[clint44]

Why does anyone want to change their wheels? Best guess is they want something that "everyone and their brother" do not have.

 

[rhino 2]

Why does anyone want to change their wheels? Best guess is they want something that "everyone and their brother" do not have.

And' Sometimes a Cigar is just a Cigar.....:Shrug:
[Sigmund Freud]

 

[lzski326]

Why does anyone want to change their wheels? Best guess is they want something that "everyone and their brother" do not have.

My reason was it's darn near impossible to keep the stock raw aluminum wheels clean and shiny. I sent mine out for chrome.

 

[Mykneesbehurtin]

I will have the stock ones chromed but a friend has an 09 tri as is rather,well cheap,and doesn't want to pay custom bike wheel prices.

 

[clint44]

I will have the stock ones chromed but a friend has an 09 tri and is rather,well cheap,and doesn't want to pay custom bike wheel prices.

How cheap is "cheap", Steve? I've seen quite a few rear wheels that would look good on a Tri Glide or Freewheeler, for around $300/each.

 

[jc1300]

I've tried to search this, but.......


Will the Free Wheeler Rear rims fit the TriGlide? Both are 2015's

Thanks - And Happy New Year Gang!

jc

 

[Fearless]

Yes they all fit

I'm sure they will interchange if I would change wheels It would be after market lots out there any tire and wheel shop could assist you in selection. Clint has a wealth of knowledge on wheels and fitment on triglides PM Clint he is always glad to help. Please give him a little time to respond he is really busy right now. ride safely fearless

I've tried to search this, but.......


Will the Free Wheeler Rear rims fit the TriGlide? Both are 2015's

Thanks - And Happy New Year Gang!

jc

 

[jc1300]

I'm sure they will interchange if I would change wheels It would be after market lots out there any tire and wheel shop could assist you in selection. Clint has a wealth of knowledge on wheels and fitment on triglides PM Clint he is always glad to help. Please give him a little time to respond he is really busy right now. ride safely fearless

Thanks Fearless - I will wait on Clint - There just happens to be a new pair near me for $150....Hard to pass up if they fit - I do like them better

jc

 

[GARYD]

I have a brand new set of 3 wheels for sale $400 + shipping.

My stock wheels got ruined a couple winters ago and I wanted to send them out to be plated, but changed my mind and kept them just for winter riding and bought a set of OEM wheels to send out to be plated instead. Changed my mind again and bought a set of H-D Anarchy wheels for the summer months.
So now I have that new set for sale if anyone is interested.
If your local or near by I can deliver and save shipping.

 

[bigfish_Oh]

I have 2 2014 rears used under 600 miles then black powder coated, not used since. can deliver from 45502 to St. Louis on I70.

 

[clint44]

I've tried to search this, but.......
Will the Free Wheeler Rear rims fit the TriGlide? Both are 2015'sThanks - And Happy New Year Gang!
jc

I'm almost positive they are interchangeable as I've seen TriGlide wheels on Frees,and vice versa.

Hope everyone has a Happy New Year, too.

 

[RickDeVon]

I've tried to search this, but.......


Will the Free Wheeler Rear rims fit the TriGlide? Both are 2015's



Thanks - And Happy New Year Gang!


jc

Yes sir they will and a 19" Street Glide will also...

 

[jc1300]

I'm thinking I like these better than the original TriGlide wheels because they are a bit more Black.....and match the bike. I'm still having the originals Powder Coated......but these might see some time too!