Adjusting headlight on Freewheeler

[bobbyhit]

Hello. just installed LED headlight on my Harley Freewheeler. I can see the adjusting bolt for vertical adjustment but can't get on it to loosen. Any trick or special tool? Thanks

 

[Jack Klarich]

Use two long 9/16th wrenches with steering straight ahead, the bolt is tight as hell

 

[bobbyhit]

Adjusting headlight

Thank you. Cut a 9/16" wrench off and slipper a piece of 3/4" pipe over wrench. worked great!

 

[Peter A.]

Wrench

Thank you. Cut a 9/16" wrench off and slipper a piece of 3/4" pipe over wrench. worked great!

GREAT......thats what is Soooo nice about this site,
good info.............helping each other out!

 

[Mudxshark]

Headlight adjustment

I used 9/16 ratcheting boxed wrenches

 

[TOMMY M]

Light adjustment

How do you get to the bolt to adjust light front, rear or bottom

 

[Jack Klarich]

How do you get to the bolt to adjust light front, rear or bottom

Ya got to look at the front end ahead of the gas tank, U will see the bolts thru the block, they are 3/8 inch= 9/16th wrench, Pretty stinkin tight

Now the one goes thru left to right that is 4 uo and down

The 1 thru the bottom { Straight up} u can get it from the front of the bike, cover ur fender so ya dont ding the paint

This bolt IF u get it loose U can swing the light bucket L and R

Look at #44 here