150 Most Recent Posts

Thread AuthorPostersPost AuthorForumThread/Post Link
rocket1lf7Marc HStallion TrikesEverything Went To Heck
Grandpot3tourmanRoadsmith Trikes
...
Extra Luggage Racks
Smitty9014Smitty901Sidecar ForumSmall crack down the rabbit hole
Smitty9014OlddogSidecar ForumSmall crack down the rabbit hole
Smitty9014ZammySidecar ForumSmall crack down the rabbit hole
Smitty9014Smitty901Sidecar ForumSmall crack down the rabbit hole
rocket1lf71dn5upStallion TrikesEverything Went To Heck
rocket1lf71dn5upStallion TrikesEverything Went To Heck
ctdair141dn5upHarley Tri GlideHot Rotors After New Pads
rocket1lf7rocket1lfStallion TrikesEverything Went To Heck
DaveL2DaveLHarley Trike Convers...Re-Tune & Dyno when you convert...
ctdair14PanheadSteveHarley Tri GlideHot Rotors After New Pads
Davep8PanheadSteveHarley Tri GlideTRI GLIDE AIR FILTER QUESTION
ctdair14ctdairHarley Tri GlideHot Rotors After New Pads
Grandpot3BurnerboyRoadsmith Trikes
...
Extra Luggage Racks
ctdair14ctdairHarley Tri GlideHot Rotors After New Pads
ctdair14ctdairHarley Tri GlideHot Rotors After New Pads
ctdair14ctdairHarley Tri GlideHot Rotors After New Pads
ctdair14bikerbilloneHarley Tri GlideHot Rotors After New Pads
ZZMACH13NotgrownupHarley Tri GlideRinehart VS Vance & Hines for M...
Davep8NotgrownupHarley Tri GlideTRI GLIDE AIR FILTER QUESTION
DaveL2NotgrownupHarley Trike Convers...Re-Tune & Dyno when you convert...
ctdair14NotgrownupHarley Tri GlideHot Rotors After New Pads
BigN693Marc HHarley Trike Convers...Servicar rear end with box or cargo
ISP-FL4ZammyTrike TravelJune Trip Is Growing!
ctdair14ROAD DOGHarley Tri GlideHot Rotors After New Pads
ctdair14ctdairHarley Tri GlideHot Rotors After New Pads
ctdair14hogmemberisoldHarley Tri GlideHot Rotors After New Pads
ctdair14ctdairHarley Tri GlideHot Rotors After New Pads
ISP-FL4ISP-FLTrike TravelJune Trip Is Growing!
Grandpot3GrandpotRoadsmith Trikes
...
Extra Luggage Racks
Kneesinbreeze10StrelnikovHarley Freewheeler /...Hiway pegs without installing crash...
TomyJ12TomyJHome Built TrikesTriPod
BigN693BigN69Harley Trike Convers...Servicar rear end with box or cargo
DaveL2DaveLHarley Trike Convers...Re-Tune & Dyno when you convert...
Jarhead17759LD-OrdieHarley Freewheeler /...Coast to coast ride
HDUSA12cycle7447Harley Trike Convers...Harley TPMS sensor and aftermarket ...
HDUSA12HDUSA1Harley Trike Convers...Harley TPMS sensor and aftermarket ...
Kneesinbreeze10ZammyHarley Freewheeler /...Hiway pegs without installing crash...
Ken F.10GorillaNew Member Introduct...New Freewheeler Rider
dthorn8dthornHarley Tri Glide2024 Tri Glide front axle nut torqu...
BigN693Jack KlarichHarley Trike Convers...Servicar rear end with box or cargo
dthorn8Jack KlarichHarley Tri Glide2024 Tri Glide front axle nut torqu...
Kneesinbreeze10StrelnikovHarley Freewheeler /...Hiway pegs without installing crash...
dthorn8Papa ZookHarley Tri Glide2024 Tri Glide front axle nut torqu...
Davep8PanheadSteveHarley Tri GlideTRI GLIDE AIR FILTER QUESTION
dthorn8dthornHarley Tri Glide2024 Tri Glide front axle nut torqu...
dthorn8rhino 2Harley Tri Glide2024 Tri Glide front axle nut torqu...
dthorn8dthornHarley Tri Glide2024 Tri Glide front axle nut torqu...
dthorn8Dan SCHarley Tri Glide2024 Tri Glide front axle nut torqu...
Noodles10710RoadRunner18Harley Freewheeler /...Very Nice Gloves
Noodles10710LD-OrdieHarley Freewheeler /...Very Nice Gloves
dthorn8dthornHarley Tri Glide2024 Tri Glide front axle nut torqu...
Mischevious13SullyNew Member Introduct...Hello from Iowa.
Ken F.10hardwickbvNew Member Introduct...New Freewheeler Rider
Mischevious13woodyNew Member Introduct...Hello from Iowa.
Ken F.10Jack KlarichNew Member Introduct...New Freewheeler Rider
Ken F.10ol' schoolNew Member Introduct...New Freewheeler Rider
Mischevious13ol' schoolNew Member Introduct...Hello from Iowa.
Ken F.10trike ladyNew Member Introduct...New Freewheeler Rider
Mischevious13trike ladyNew Member Introduct...Hello from Iowa.
BigN693BigN69Harley Trike Convers...Servicar rear end with box or cargo
Mischevious13Marc HNew Member Introduct...Hello from Iowa.
Ken F.10Marc HNew Member Introduct...New Freewheeler Rider
Mischevious13Papa ZookNew Member Introduct...Hello from Iowa.
Mischevious13Uncle FesterNew Member Introduct...Hello from Iowa.
Ken F.10Uncle FesterNew Member Introduct...New Freewheeler Rider
Ken F.10ZammyNew Member Introduct...New Freewheeler Rider
Davep8DavepHarley Tri GlideTRI GLIDE AIR FILTER QUESTION
Ken F.10rhino 2New Member Introduct...New Freewheeler Rider
Ken F.10Ken F.New Member Introduct...New Freewheeler Rider
ZZMACH114stancotreauHarley Tri GlideNew Member Hello from NH
Mischevious13ZammyNew Member Introduct...Hello from Iowa.
Mischevious13Jack KlarichNew Member Introduct...Hello from Iowa.
Davep8Jack KlarichHarley Tri GlideTRI GLIDE AIR FILTER QUESTION
dthorn8Jack KlarichHarley Tri Glide2024 Tri Glide front axle nut torqu...
dthorn8Dan SCHarley Tri Glide2024 Tri Glide front axle nut torqu...
MDO101Peter A.Harley Freewheeler /...What Did You Do To Your Freewheeler...
Mischevious13GorillaNew Member Introduct...Hello from Iowa.
Vin6Jack KlarichHarley Tri GlideCold Engine Revs High When Starting
MDO101Jack KlarichHarley Freewheeler /...What Did You Do To Your Freewheeler...
Mischevious13hardwickbvNew Member Introduct...Hello from Iowa.
MDO101Peter A.Harley Freewheeler /...What Did You Do To Your Freewheeler...
Scratch12CyrclemeSuzuki - Kawasaki Tr...Suzuki C50 Lehman Tramp
Scratch12Papa ZookSuzuki - Kawasaki Tr...Suzuki C50 Lehman Tramp
Scratch12rhino 2Suzuki - Kawasaki Tr...Suzuki C50 Lehman Tramp
Scratch12CyrclemeSuzuki - Kawasaki Tr...Suzuki C50 Lehman Tramp
Scratch12CyrclemeSuzuki - Kawasaki Tr...Suzuki C50 Lehman Tramp
Mischevious13MischeviousNew Member Introduct...Hello from Iowa.
Mischevious13rhino 2New Member Introduct...Hello from Iowa.
Mischevious13MischeviousNew Member Introduct...Hello from Iowa.
Vin6RKplus10Harley Tri GlideCold Engine Revs High When Starting
Davep15NotgrownupNew Member Introduct...Hello from the mountains
woody14cycle7447Maggie Valley Gather...Maggie Valley 2024
Vin6rhino 2Harley Tri GlideCold Engine Revs High When Starting
Vin6VinHarley Tri GlideCold Engine Revs High When Starting
Vin6VinHarley Tri GlideCold Engine Revs High When Starting
rocket1lf7cycle7447Stallion TrikesEverything Went To Heck
rocket1lf7GorillaStallion TrikesEverything Went To Heck
HedgehogRider5rhino 2Stallion TrikesFilling up - really slow?
HedgehogRider5Trikervet60Stallion TrikesFilling up - really slow?
Davep15jjvwNew Member Introduct...Hello from the mountains
rocket1lf7Trikervet60Stallion TrikesEverything Went To Heck
woody14jjvwMaggie Valley Gather...Maggie Valley 2024
ISP-FL4jjvwTrike TravelJune Trip Is Growing!
ZZMACH13OLBLUHarley Tri GlideRinehart VS Vance & Hines for M...
rocket1lf2rocket1lfStallion TrikesStallion Parts Needed
DK Custom Products363GefusHarley Tri GlideWhat did you do to Your Tri-Glide T...
Davep8PanheadSteveHarley Tri GlideTRI GLIDE AIR FILTER QUESTION
Dasmoeturhead8DasmoeturheadCan Am Spyder Trike...New LED Lights
Burnerboy4Papa ZookRoadsmith Trikes
...
Too Pa Pa Zook
Kneesinbreeze10Jack KlarichHarley Freewheeler /...Hiway pegs without installing crash...
Nemurai10Jack KlarichNew Member Introduct...Hello From Miami
Nemurai10SullyNew Member Introduct...Hello From Miami
Nemurai10ol' schoolNew Member Introduct...Hello From Miami
Nemurai10GorillaNew Member Introduct...Hello From Miami
Dasmoeturhead8GorillaCan Am Spyder Trike...New LED Lights
rocket1lf2GorillaStallion TrikesStallion Parts Needed
ISP-FL4Papa ZookTrike TravelJune Trip Is Growing!
Ironhorse542Papa ZookCalifornia Sidecar T...Helmet release button? CSC Encore D...
Nemurai10trike ladyNew Member Introduct...Hello From Miami
Dasmoeturhead8Marc HCan Am Spyder Trike...New LED Lights
MDO101rhino 2Harley Freewheeler /...What Did You Do To Your Freewheeler...
Nemurai10Marc HNew Member Introduct...Hello From Miami
ISP-FL4ISP-FLTrike TravelJune Trip Is Growing!
MDO101Jack KlarichHarley Freewheeler /...What Did You Do To Your Freewheeler...
scuzzi5Jack KlarichHarley Tri GlideTri Glide extended reach seat
scuzzi5ISP-FLHarley Tri GlideTri Glide extended reach seat
MDO101rhino 2Harley Freewheeler /...What Did You Do To Your Freewheeler...
Dasmoeturhead8Jack KlarichCan Am Spyder Trike...New LED Lights
MDO101ZammyHarley Freewheeler /...What Did You Do To Your Freewheeler...
woody14PosseRiderMaggie Valley Gather...Maggie Valley 2024
Dasmoeturhead8ZammyCan Am Spyder Trike...New LED Lights
Nemurai10ZammyNew Member Introduct...Hello From Miami
Nemurai10hardwickbvNew Member Introduct...Hello From Miami
Dasmoeturhead8Papa ZookCan Am Spyder Trike...New LED Lights
Dasmoeturhead8cycle7447Can Am Spyder Trike...New LED Lights
Kneesinbreeze10rhino 2Harley Freewheeler /...Hiway pegs without installing crash...
Kneesinbreeze10JerseyGirlRiderHarley Freewheeler /...Hiway pegs without installing crash...
Dasmoeturhead8rhino 2Can Am Spyder Trike...New LED Lights
Nemurai10rhino 2New Member Introduct...Hello From Miami
Nemurai10NemuraiNew Member Introduct...Hello From Miami
rocket1lf2rocket1lfStallion TrikesStallion Parts Needed
Dasmoeturhead8DasmoeturheadCan Am Spyder Trike...New LED Lights
Davep8rhino 2Harley Tri GlideTRI GLIDE AIR FILTER QUESTION
scuzzi5Jack KlarichHarley Tri GlideTri Glide extended reach seat
Vin6Jack KlarichHarley Tri GlideCold Engine Revs High When Starting
Davep8Jack KlarichHarley Tri GlideTRI GLIDE AIR FILTER QUESTION
Davep8DavepHarley Tri GlideTRI GLIDE AIR FILTER QUESTION
Ironhorse542Ironhorse54California Sidecar T...Helmet release button? CSC Encore D...
Likes Likes:  1,429
Thanks Thanks:  14
Page 36 of 48 FirstFirst ... 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 ... LastLast
Results 701 to 720 of 958

Thread: A Day in the Life...

  1. #701
    750+ Posts
    Join Date
    Jul 2015
    Location
    Dickinson
    Posts
    593

    Default

    Quote Originally Posted by DK Custom Products View Post
    WOW...just...WOW!

    Kevin
    That's WHY we have a Bobcat!

  2. #702
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,134

    Default

    Quote Originally Posted by frostbite51 View Post
    That's WHY we have a Bobcat!
    If I lived where there was that much white stuff....I might have fun in the bobcat...but probably would sell it after one year and use the money to rent a moving truck!

    Kevin
    www.DKCustom.com

    Gear Up & Ride in! DK Custom 4th Annual Open House, June 8th. 🏍️ Click HERE For The Lowdown.

    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  3. #703
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,134

    Default

    County finally got the road, that washed out a week or so ago, back open.

    Looks like they put a bigger culvert in for the water to go thru, rather than taking the road away next time we get more heavy rains.



    Wow! The TG is dirty! Got wash it soon.

    Kevin
    www.DKCustom.com

    Gear Up & Ride in! DK Custom 4th Annual Open House, June 8th. 🏍️ Click HERE For The Lowdown.

    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  4. #704
    4750+ Posts
    Join Date
    Mar 2015
    Location
    Texas
    Posts
    4,036

    Default

    Quote Originally Posted by DK Custom Products View Post
    County finally got the road, that washed out a week or so ago, back open.

    Looks like they put a bigger culvert in for the water to go thru, rather than taking the road away next time we get more heavy rains.



    Wow! The TG is dirty! Got wash it soon.

    Kevin
    They all seem to have the motto, "don't do it right, do it twice". Meaning they seemed to never have the time or money to do a job correctly the first time but always seem to be able to the next time. Costing tax payers more than if done correctly right from the get-go. We have two near us. Rather tan put a much bigger culvert in when they began to wash out, the cheap SOBs just pushed the one back down and laid another the same size next to it. Yet when the rains come the road is flooded for several hours and all around the two culverts is major erosion. So what do they do? Bring in more big rocks just like the ones washed away in the first place. No, they can't just go ahead and put one huge culvert in. They have done that at least 6 times now. Each time they work on them for at least 2 hours. What a waste of man power and rocks. Somewhere down this creek a rock damn is being built. At some point the water is going to break out another area and flood unsuspecting people. Just wait for the law suits on that. Cheap never is really cheap in the long run.
    The only reason some people are still alive is it's illegal to shoot them.
    American Legion Rider

  5. #705
    Thumper
    Gold Club Member
    1dn5up's Avatar
    Join Date
    Nov 2015
    Location
    Bear Mtn. NY
    Posts
    23,360

    Default DK’s Web Site

    Was checking out the new site. Interviews ect . Great job Kevin.
    2012 Triglide Piaggio MP3 500 to get groceries 1991 FLHS as back up
    "Better to have it and not need it than need it and not have it !"
    Tiffany, Olive, Daisy, “The Three Musketeers” together again.

  6. #706
    18000+ Posts
    Tech Contributor
    Gold Club Member
    Jack Klarich's Avatar
    Join Date
    Oct 2016
    Location
    Jax, Fla USA
    Posts
    18,289

    Default

    Quote Originally Posted by hogcowboy View Post
    They all seem to have the motto, "don't do it right, do it twice". Meaning they seemed to never have the time or money to do a job correctly the first time but always seem to be able to the next time. Costing tax payers more than if done correctly right from the get-go. We have two near us. Rather tan put a much bigger culvert in when they began to wash out, the cheap SOBs just pushed the one back down and laid another the same size next to it. Yet when the rains come the road is flooded for several hours and all around the two culverts is major erosion. So what do they do? Bring in more big rocks just like the ones washed away in the first place. No, they can't just go ahead and put one huge culvert in. They have done that at least 6 times now. Each time they work on them for at least 2 hours. What a waste of man power and rocks. Somewhere down this creek a rock damn is being built. At some point the water is going to break out another area and flood unsuspecting people. Just wait for the law suits on that. Cheap never is really cheap in the long run.
    It is job secutity

    I don't like it but how do we stop it
    Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
    Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL

  7. #707
    100000 + Posts
    Gold Club Member
    rhino 2's Avatar
    Join Date
    Oct 2011
    Location
    Utopia New Jersey USA..
    Posts
    100,192

    Default

    Quote Originally Posted by Recycledteen View Post
    Bradford Pear Trees are beautiful but they grow very fast and as a result are VERY soft wood!!!! As dense as they are, they catch a lot of wind and have a bunch of breakage, usually right out of the middle!!!!
    Funny you should say that' I just got back from trimming some heavy branches that the snow storm took down from the Bradford in the front of my house no more than 25 minutes ago...
    Sometimes a Cigar is Just a Cigar.....
    2019 Tri-Glide.......

  8. #708
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,134

    Default

    Quote Originally Posted by hogcowboy View Post
    They all seem to have the motto, "don't do it right, do it twice". Meaning they seemed to never have the time or money to do a job correctly the first time but always seem to be able to the next time. Costing tax payers more than if done correctly right from the get-go. We have two near us. Rather tan put a much bigger culvert in when they began to wash out, the cheap SOBs just pushed the one back down and laid another the same size next to it. Yet when the rains come the road is flooded for several hours and all around the two culverts is major erosion. So what do they do? Bring in more big rocks just like the ones washed away in the first place. No, they can't just go ahead and put one huge culvert in. They have done that at least 6 times now. Each time they work on them for at least 2 hours. What a waste of man power and rocks. Somewhere down this creek a rock damn is being built. At some point the water is going to break out another area and flood unsuspecting people. Just wait for the law suits on that. Cheap never is really cheap in the long run.
    Yeah, same type of thing goes on here. What's worse, it seems like the County has some new employees that really are not up to snuff on road repair. The last few month I've noticed that the roads actually seem worse after they do work of "repairing" them.

    Quote Originally Posted by Jack Klarich View Post
    It is job secutity

    I don't like it but how do we stop it
    Dunno...I know some other folks have complained, I am on the verge of taking the time to do so also. I suspect that if the county hears from enough of us they will take some action, and hopefully, that action will produce improved results.

    Kevin
    www.DKCustom.com

    Gear Up & Ride in! DK Custom 4th Annual Open House, June 8th. 🏍️ Click HERE For The Lowdown.

    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  9. #709
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,134

    Default

    Quote Originally Posted by 1dn5up View Post
    Was checking out the new site. Interviews ect . Great job Kevin.
    Thank you!

    We have a few more interviews in the works right now too!

    Kevin
    www.DKCustom.com

    Gear Up & Ride in! DK Custom 4th Annual Open House, June 8th. 🏍️ Click HERE For The Lowdown.

    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  10. #710
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,134

    Default

    Last Thursday & Friday we got the container out back almost done...



    ...still have a bit more work to do to it. But we got a bunch of shelves up, and moved some workbenches in...



    ...and gained some space in the main building for incoming equipment.

    We have done nothing on the SBS project bike for over a month, except move it outside the other day. Then we moved it back in, but it looks like it is going to be moved to my house for the rest of the work to be done there. Simply not enough room at the shop now.



    Since I have no extra room in the bike room, the SBS is going to be in the house for the remainder of the work being done on it.

    Just realized, I have not told Mary....gotta go do that now.
    www.DKCustom.com

    Gear Up & Ride in! DK Custom 4th Annual Open House, June 8th. 🏍️ Click HERE For The Lowdown.

    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  11. #711
    4250+ Posts
    Gold Club Member
    Marc H's Avatar
    Join Date
    Dec 2011
    Location
    Evensville,Tn.
    Posts
    4,433

    Default

    Quote Originally Posted by hogcowboy View Post
    They all seem to have the motto, "don't do it right, do it twice". Meaning they seemed to never have the time or money to do a job correctly the first time but always seem to be able to the next time. Costing tax payers more than if done correctly right from the get-go. We have two near us. Rather tan put a much bigger culvert in when they began to wash out, the cheap SOBs just pushed the one back down and laid another the same size next to it. Yet when the rains come the road is flooded for several hours and all around the two culverts is major erosion. So what do they do? Bring in more big rocks just like the ones washed away in the first place. No, they can't just go ahead and put one huge culvert in. They have done that at least 6 times now. Each time they work on them for at least 2 hours. What a waste of man power and rocks. Somewhere down this creek a rock damn is being built. At some point the water is going to break out another area and flood unsuspecting people. Just wait for the law suits on that. Cheap never is really cheap in the long run.


    Th state played around letting the gravel wash out from around 1 here a few years back and we got torential rain Christmas and washed the culvert and road out.A young man lost his life that night when his car was washed away after he drove off in it.
    Do not argue with an idiot.He will drag you down to his level and beat you with experience.
    Its dog eat dog world and i'm wearing milkbone underwear.
    1989 GL1500 Goldwing (SOLD)
    2006 GL1800 CSC

  12. #712
    4750+ Posts
    Join Date
    Mar 2015
    Location
    Texas
    Posts
    4,036

    Default

    Quote Originally Posted by DK Custom Products View Post
    Yeah, same type of thing goes on here. What's worse, it seems like the County has some new employees that really are not up to snuff on road repair. The last few month I've noticed that the roads actually seem worse after they do work of "repairing" them.

    Kevin
    We only have two grader operators here. An older guy that does a super job. Puts a nice crown so water runs off like it should. Then we have a kid that comes along and makes the road perfectly flat ruining everything previously done. I hate seeing that kid come down the road. I'm sure the old man has said something to the kid but maybe not. I'm dreading the time we have just that kid and yet another kid. Roads here will be a total mess. At least now about 4 times a year they look great when the old man does them.
    The only reason some people are still alive is it's illegal to shoot them.
    American Legion Rider

  13. #713
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,134

    Default

    2014 Flashback- Hot Bike Tour



    A visit to S&S



    Kevin
    www.DKCustom.com

    Gear Up & Ride in! DK Custom 4th Annual Open House, June 8th. 🏍️ Click HERE For The Lowdown.

    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  14. #714
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,134

    Default

    Another FLASHBACK-

    2016 Road Trip "40 Days Following the Front Wheel"

    We stayed in Hatch, UT...nicely located between several National Parks.



    Motel was....



    ...very Harley/Biker oriented.



    Click LINK to see entire ride report with hundreds of pics!

    Kevin
    www.DKCustom.com

    Gear Up & Ride in! DK Custom 4th Annual Open House, June 8th. 🏍️ Click HERE For The Lowdown.

    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  15. #715
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,134

    Default

    This weekend we did a bit of testing on a new front fork set up-

    It was a reminder of the hundreds of hours we spend a couple years back testing dozens of different setups.

    Fortunately it was just one new set up this last weekend.



    First we popped out the forks...



    ...then removed the internals- Performance Springs and Intiminators. This is a really good setup that has performed well.



    We then replaced the spring and the damper tube, along with a different weight fluid for the newly designed damper tube.



    We rode one of our test circuits before the clouds let loose with some pretty heavy rain. We'll be doing some more test riding over the next week with this new setup.

    Kevin
    www.DKCustom.com

    Gear Up & Ride in! DK Custom 4th Annual Open House, June 8th. 🏍️ Click HERE For The Lowdown.

    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  16. #716
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,134

    Default



    Kevin
    www.DKCustom.com

    Gear Up & Ride in! DK Custom 4th Annual Open House, June 8th. 🏍️ Click HERE For The Lowdown.

    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  17. #717
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,134

    Default

    Yesterday it was 72* & Sunny and I got to ride quite a bit...had some appointments up in Memphis.

    Today it is 45* and pouring rain!

    Moved two bikes yesterday-

    Dwayne's Ironhead Project Bike got moved from Devin's home shop back to Dwayne's house. I know he has new wheels and tires he's putting on it...but this is how it looked yesterday.



    The SBS Chop Project Bike got moved from the shop to my home. Here's a pic of it sitting in its new spot at the house. Hopefully I will be able to get back working on it late this month.



    Kevin
    www.DKCustom.com

    Gear Up & Ride in! DK Custom 4th Annual Open House, June 8th. 🏍️ Click HERE For The Lowdown.

    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  18. #718
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,134

    Default

    Yesterday it was 75* and no rain. WhooHoo!

    I did a 150 mile loop....about 1/2 back roads and 1/2 interstate.

    Stopped off at all 3 Dealerships in our area, plus one Indie shop.

    Was dropping off WOG Magazines at each location.



    It was a very nice afternoon putt.

    At one of the Dealerships I saw this Copper Plated bike and took a few pics-



    Lots of details. Talked to the owner, he's had it this way for 4 years...it's holding up really well.



    Kevin
    www.DKCustom.com

    Gear Up & Ride in! DK Custom 4th Annual Open House, June 8th. 🏍️ Click HERE For The Lowdown.

    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  19. #719
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,134

    Default

    I've been wearing these boots almost everyday for the last 6 years.

    Every 3-4 months I usually clean them, polish them with some black cream and then put some mink oil on them.

    I went a bit longer this time-



    But a little bit of work and they are looking good again, and sealed up from further damage.



    I've been very impressed with these HD Lynx Waterproof boots. They're comfortable, lightweight, waterproof and good in all temps. I'll probably be looking to get another pair in a year or so.

    Kevin
    www.DKCustom.com

    Gear Up & Ride in! DK Custom 4th Annual Open House, June 8th. 🏍️ Click HERE For The Lowdown.

    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  20. #720
    4750+ Posts
    Join Date
    Mar 2015
    Location
    Texas
    Posts
    4,036

    Default

    Quote Originally Posted by DK Custom Products View Post
    I've been wearing these boots almost everyday for the last 6 years.

    Every 3-4 months I usually clean them, polish them with some black cream and then put some mink oil on them.

    I went a bit longer this time-



    But a little bit of work and they are looking good again, and sealed up from further damage.



    I've been very impressed with these HD Lynx Waterproof boots. They're comfortable, lightweight, waterproof and good in all temps. I'll probably be looking to get another pair in a year or so.

    Kevin
    You might consider getting a new pair now before the prices go up even more. I've never seen the price go down.
    The only reason some people are still alive is it's illegal to shoot them.
    American Legion Rider

Page 36 of 48 FirstFirst ... 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 ... LastLast

Similar Threads

  1. Is there life out there?
    By pcombe in forum General Discussion
    Replies: 25
    Last Post: 03-02-2017, 11:00 AM
  2. In Life, Never Say Never
    By mgwtrike in forum Honda Trikes
    Replies: 5
    Last Post: 01-02-2016, 07:28 PM
  3. The Dad Life
    By Papa Zook in forum General Discussion
    Replies: 6
    Last Post: 10-31-2011, 01:14 PM
  4. Life
    By caveman50 in forum General Discussion
    Replies: 4
    Last Post: 02-03-2011, 05:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •