Speed Bleeders for 2011 Tri Glide REAR Calipers

[TomWoodgeard]

Does anyone know for sure what the part # is for the rear calipers on a 2011 Tri Glide?

In reading other forums I get 2 different #'s

Thank you for any and all replies!!

 

[MDO]

Does anyone know for sure what the part # is for the rear calipers on a 2011 Tri Glide?

In reading other forums I get 2 different #'s

Thank you for any and all replies!!

Have you checked on websites that show parts breakdowns, like Ronnies.

Also, it's much easier to get an inline check valves like Motion Pro sells, and put it in a piece of tubing and use it with the stock bleeder screws. It works well. Don't quote me but I believe they are around $12 & you only need 1.

If your set on bleeders at each caliber, check here.

http://www.speedbleeder.com/

 

[TomWoodgeard]

No listing on Speed Bleeder site. Way old.......Needs updated.

I'm pretty sure they are 8125L , but I want to be sure.

Also....I want to flush out the rear system......Need 2 then.

 

[Jack Klarich]

You can suck most of all the old fluid out of the master with a syringe, top it off with fresh fluid

Crack each rear bleeder loose, let it gravity bleed til fresh fluid runs out

Tighten the bleeder

Fill the master back up, pump the brakes short slow medium strokes, do 1 bleeder at a time 1 more time

Refill good to go

I just did my Freewheeler, ft, rear bake and clutch fluid Good to go

3/8 x 24 is most common size bleeder

You can verify this by removing the bleeder and winding a 3/8 x24 nut on the threads

 

[TomWoodgeard]

I'm trying to have the correct sized bleeders BEFORE I start the project.

Thanks for all replies!!

 

[rhino 2]

Does anyone know for sure what the part # is for the rear calipers on a 2011 Tri Glide?

In reading other forums I get 2 different #'s

Thank you for any and all replies!!

Right rear............83426-09B..

Left rear..............83427-09B..Hope that helps....:Shrug:

 

[TomWoodgeard]

Thanks rhino2, but I needed the part # for SpeedBleeders that are correct for the rear calipers.

 

[rhino 2]

Thanks rhino2, but I needed the part # for SpeedBleeders that are correct for the rear calipers.

Google J and P Cycles , Go to tech suport and click on ,Live Help...

 

[TomWoodgeard]

OK.....FINALLY got a reply from Tracy at Speed Bleeders.

The correct size for Tri Glide REAR calipers is: SB8125L