Got it... thank you again. Great to hear about the ride. Any noticeable difference around tight curves from stock tires? I imagine you need to be aware of the extra width of the trike now also as compared to stock. I'm sure I'll bounce off a few things until I get used to it. Hubcentric rings ordered and hopefully won't take too long... they had to be made to size and I got the aluminum instead of plastic. Thanks for the updates!
Freewheeler "Chopper" Project
- Thread starter Free Bird
- Start date
Got it... thank you again. Great to hear about the ride. Any noticeable difference around tight curves from stock tires? I imagine you need to be aware of the extra width of the trike now also as compared to stock. I'm sure I'll bounce off a few things until I get used to it. Hubcentric rings ordered and hopefully won't take too long... they had to be made to size and I got the aluminum instead of plastic. Thanks for the updates!
- Thread starter
- #82
Yes.... I will win the rooster tail contest.... I actually am interested in how bad the hydroplaning will be. We have not had a serious rain since the tires were bolted on but I have a park nearby that is going to become a test track for driving and controlling the wide tires in the rain....(Thanks for the idea Kevin... saw the Tri-Glide snow video)
Oh, and before anybody says it ....
Yes... the best way to manage rain with those tires is to park it 'till the sun comes out :laugh:
I am getting geared up for the next phase: The front end.
I reverse engineered the triple trees from a set of OEM ones. Don't let anyone tell you the Freewheeler has a Tour Glide or Road King front end... it does not. The dimensions, rake, neck geometry differ substantially from those and other models.
The triple trees are complete at this point. They are machined from 2" billet.... The tree design is similar to this (kind of a reverse-v wide glide) only a little beefier:
We kept all of the touring geometry except we added some rake vs the stock tree. The between trees tube covers and cowbells are similar to this....
The front end will be 4" over stock (the pic above is more like 6 over) so it will stretch the profile a bit and (if I did the rake and trail calcs right with the geometry changes induced by the front and rear wheel/tire changes) it should net out like a set of HHI 10 degree trees (I know they only make 9 and 12.... but I want to be my own person
orag and the whole bike will be lifted 1.5" like the tail is now. It will be crowned off with a set of 1.25 18" rise apes (of course) and braided steel lines all round. So that is the work plan for October.... Will keep you posted on progress......
- Thread starter
- #83
Honestly no. Even reverse works well. I was trying to maintain the setback on the wheel to be same as the stock design so as to keep braking dynamics and moments the same (except for the extra weight) as the stock wheel. It corners really well, steering effort and response are not affected as for as my senses can tell. I was no more or less fatigued by the drive through the twisty turny roads in Calhoun County Illinois.... So unscientifically, I would say ... It turned out OK
You do have to be more mindful (very) of staying in the center of the road. I only have a foot on either side. Kinda like driving a dually pick up.
Man thats looking good. Make sure you enter DK Customs online bike contest for next year, I think you got it!orag:
orag:
DK Custom Products
Sponsor
Yes.... I will win the rooster tail contest.... I actually am interested in how bad the hydroplaning will be. We have not had a serious rain since the tires were bolted on but I have a park nearby that is going to become a test track for driving and controlling the wide tires in the rain....(Thanks for the idea Kevin... saw the Tri-Glide snow video)
Oh, and before anybody says it ....
Yes... the best way to manage rain with those tires is to park it 'till the sun comes out :laugh:
I am getting geared up for the next phase: The front end.
I reverse engineered the triple trees from a set of OEM ones. Don't let anyone tell you the Freewheeler has a Tour Glide or Road King front end... it does not. The dimensions, rake, neck geometry differ substantially from those and other models.
The triple trees are complete at this point. They are machined from 2" billet.... The tree design is similar to this (kind of a reverse-v wide glide) only a little beefier:
View attachment 61965
We kept all of the touring geometry except we added some rake vs the stock tree. The between trees tube covers and cowbells are similar to this....
View attachment 61966
The front end will be 4" over stock (the pic above is more like 6 over) so it will stretch the profile a bit and (if I did the rake and trail calcs right with the geometry changes induced by the front and rear wheel/tire changes) it should net out like a set of HHI 10 degree trees (I know they only make 9 and 12.... but I want to be my own person
It will be crowned off with a set of 1.25 18" rise apes (of course) and braided steel lines all round. So that is the work plan for October.... Will keep you posted on progress......
Wow, this is gonna be an amazing Trike. I am fighting temptation looking at it. haha
As you know, it will hydroplane easier...only testing it out will let you know how much slower you will need to go to prevent it. Very bad-ass!
Man thats looking good. Make sure you enter DK Customs online bike contest for next year, I think you got it!
Yes, we'll be opening up the 5th Annual IBC in the next few weeks. Big difference this year...Winners will be determined by Public Voting!
Kevin
- Thread starter
- #86
I am not sure I will be finished with it in a few weeks.... it has been slow going (lots of personal learning curve issues... this ain't no mid-70's shovel
). But we'll see where we are when the day comes.
DK Custom Products
Sponsor
I am not sure I will be finished with it in a few weeks.... it has been slow going (lots of personal learning curve issues... this ain't know mid-70's shovel
Are they ever really finished?
In a few weeks is when bikes/trikes can start entering. But the IBC will be open for new entrants all the way thru the end of the year.
Kevin
- Thread starter
- #88
Thanks Kevin. I should have the front end on by then for sure. Paint and seat and stuff.... That will be next years upgrades :laugh:
- Thread starter
- #90
I replaced the stock floorboards with CycleSmith Banana Boards & Matching Brake Pedal and the stock passenger boards with Supreme Legends Floorboards. The Controls are a Kuryakyn Extended Brake Pedal and a Baker Custom Extended Shifter Arm & "Old No7" Extended Shifter Peg. Very comfortable ride
Floorboards
I by no means have the expertise that you do. I "used to" do rebuilds on the "old" stuff when all you needed was fuel,spark and oxygen, no modules, ecm, sensors, maps, maff, cats etc. plus oil lines were external. I stuck on mine extended brake,shifter, floorboard mounts,cobra slip ons, mustang seat and some other no brainers. I truly miss the days of switching cams and different lifters, push rods, carbs in the morning and he riding that afternoon.
I by no means have the expertise that you do. I "used to" do rebuilds on the "old" stuff when all you needed was fuel,spark and oxygen, no modules, ecm, sensors, maps, maff, cats etc. plus oil lines were external. I stuck on mine extended brake,shifter, floorboard mounts,cobra slip ons, mustang seat and some other no brainers. I truly miss the days of switching cams and different lifters, push rods, carbs in the morning and he riding that afternoon.
- Thread starter
- #92
:laugh: :clapping: I don't know my backside from a barn door on any of that either.... that is why I got into this forum. Any expertise I am developing is from guys and gals on this site posting things that help me make sense of the service manual (which is really expensive and not like the old FLH/FX ones... (Remember when Harley Big Twins only had 2-3 letter names). It is a great place to get an education and advice on all the crazy stuff these new bike have.... my favorite "What the Heck" moment in getting this bike was when the dealer asked me what I wanted my PIN number to be.... Cracked me up.... really..... I was laughing loudly
Like I have said before... when I was a teenager, my first bike was a rusty 47 G-Model Servicar basket case I got for a few hundred bucks and brought back to life. I did not even have a key...let alone a PIN number....
Anyway.... I relate completely to what you are saying.... and I love bikes put together with a gas ax, rattle can paint, and cobra seats....
Old timer
In my 64 years on this earth (through Jesus Christ) I've become very cynical of someone's purported expertise. Some of the info on the internet is actually frightening. If some hapless person attempts to do what some whack job is telling them the only outcome is disaster. I've seen you tube videos showing automotive repairs that will ruin a major component. Guys randomly splicing into electrical wires to get power for lighting, using low grade metals (bolts etc) in high stress areas. Making a part fit.
In my 64 years on this earth (through Jesus Christ) I've become very cynical of someone's purported expertise. Some of the info on the internet is actually frightening. If some hapless person attempts to do what some whack job is telling them the only outcome is disaster. I've seen you tube videos showing automotive repairs that will ruin a major component. Guys randomly splicing into electrical wires to get power for lighting, using low grade metals (bolts etc) in high stress areas. Making a part fit.
Jack Klarich
18000+ Posts
This is exactly what is wrong with the information age we are caught up in
Anyone can post a you tube how to video, we have to sift thru a lot of good and bad info some times
I have to laugh. 3 years ago I decided to get back in the saddle after almost 20 years and when I went to the dealership the salesman sat me on a bike and said "start her up". So I reach down on the left side of the tank searching for a while... and the salesman asked what I was doing. Told him I was looking for the fuel petcock and he turned his head like a curious dog and said " how long has it been since you rode?.... Fuel injection!" What do I know??
- Thread starter
- #96
Ha! I know.... every time I get back from a ride shut it down I am reaching for the petcock!!! That is funny awesome! :clapping:
I have learned the most from John Maxwell (HD Tech.) & the guys at Fix My Hog. It cost me $3 to join for a year, but they have videos on every item for the new M8 as far as maintenance & when I 1st got the trike it helped a lot. Now that I have the 1650 page service manual on PDF, I can figure most routine maintenance items out (so far). It answered questions I could not find anywhere else, like the exact procedure/order to bleed/flush the linked brake system.
Step by step directions in a Betty Crocker format I can't screw up, I like that!
- Thread starter
- #100
Finished working out the paint details. Tearing it down Thanksgiving week and sending it out to Crazy Horse Painting...JoAnn Bartles is an awesome flame paint artist
Welcome to the Trike Talk Community
Join our vibrant online community dedicated to all things Trikes! Whether you're a seasoned rider or just starting out, this is the place to share experiences, tips, and stories about your three-wheeled adventures. Explore modifications, maintenance advice, and rides, all while connecting with fellow trike enthusiasts from around the globe
Forum statistics
Trike Talk Community
Welcome to a community dedicated to the most diverse and fastest growing powersports segment, Motorcycle Trikes. Come join the discussion about the best makes and models, popular modifications and proven performance hacks, trike touring and travel, maintenance, meetups and more!
Register Already a member? LoginForum statistics
Share this page
