hannigan kit

[rufus15]

I've been hesitant to convert to three wheels for years. However finally for medical reasons I researched all the kits I could find and settled on the Hannigan.

My question is how long does it take to do a complete conversion with the 180 front end installed at a dealership? Thanks in advance.

 

[Papa Zook]

I've been hesitant to convert to three wheels for years. However finally for medical reasons I researched all the kits I could find and settled on the Hannigan.

My question is how long does it take to do a complete conversion with the 180 front end installed at a dealership? Thanks in advance.

Call your area Hannigan dealers and ask them. Some may be really busy and others may not, so the completion time can vary. Hannigan is currently running about 8 weeks out on shipping the kits.

 

[trike lady]

The best time of year to do the conversion is in the winter months when a shop is slow and you also beat the spring rush of I want a trike.

 

[Gorilla]

Paul,

If you don't mind a road trip from Atlanta to the Houston Tx area. Papa Zook (the site owner) is a conversion dealer (CUT-N-SHOOT CUSTOMS) (Listing at bottom of home page this site)) and does OUTSTANDING work. You would be getting the work done by someone that you are familiar with. Worth checking out.​

​

 

[FRR]

If you don't mind traveling, run it up to Hannigan and have them build it right there. That way you know you are getting a quality installation. Nice folks there also.

 

[rufus15]

hannigan trike

thanks folks, i'll get it started on it.

 

[Sealman]

Call Hannigan and ask them for their recommendation on their closest dealer/installer AND one that does a good volume with them. I converted our 2007 Goldwing in 2014 and it took about a week after the kit came into my Florida dealer. I did the trike and 180 front end conversion and love it. You will not be sorry for selecting Hannigan.

 

[bjacmarsh]

GL Hannigan conversion.

Had my 08 GL converted in 2014 with a 180 front end. Beautiful machine but converted by an installer recommended on this site but turned out to be a hack. If I had it to do over again I would ride straight to Murray, KY. and have Hannigan convert even if it meant sitting on the sidewalk for a week. All problems have been resolved and I love the trike, but the best kit in the world is NG if not done right. Be very, very careful with installers.

 

[12Wing Nut]

Hannigan

I took my 2012 to the Hannigan factory in Murray, KY. Dropped it off on Monday & picked it up on Saturday. Had the Gen ll and the 180 front end installed. No regrets!

 

[trikeman]

:clapping::wave4:

 

[therightman]

Get It Done Right!!

Go to the factory in Murray, KY to get it done right the first time!!...