Cost to put in ape hangers on Tri Glide

[daf62757]

I have a friend who is having some nerve issues and he is thinking about putting some ape hangers on his trike to help his medical issues. What is the cost for something like that? Anyone out there done something similar?

 

[Koolbreeze]

Handle Bars

Take a look at DK Customs post, he put bars similar to ape hangers on his; however, the had them fabricated. It might give you an idea. If a dealer does it it will probably cost at least $1000.00 all told with bars, wires and extensions.

Link to post: https://www.triketalk.com/forum/thr...-Out-w-lots-of-photos-videos-and-observations

 

[TonkaDriver]

Mayhem Baggers

I installed KST Kustoms 12 inch Mayhem Baggers myself. Bars cost $265.00 plus shipping. Wasn't as difficult as I expected.

Kurt

 

[Jack Klarich]

I installed KSY Kustoms 12 inch Mayhem Baggers myself. Bars cost $265.00 plus shipping. Wasn't as difficult as I expected.

Kurt

View attachment 73611

Good job:clapping:

 

[Peter A.]

Bars

If you go the stealer route it’s costly-in Ca it’s like $1200-1400, but it does really

help.

 

[Fearless]

You may want to look at Khrome Werks Website they have a great selection without the high prices. I installed 2+2 wide sweepers in 2014 really like them.

 

[hocnsoc]

About $310.

I added Twin Peaks 12" x 1-1/4 apes and Namz 8" wire extensions. Took my time and used weed trimmer string to pull the wires through. Wasn't bad. Thinking of removing the outer fairing was scary but that proved to be the easiest part. There are a few good videos on Utube that will help you to see what is involved.

 

[MDO]

Here is a HD Tech installing a nice bar on his softtail that will give you an idea of what's involved.

 

[eagle1]

handlebars

do it yourself. i did my 2009 t/g with paul yaffe 12" pullbacks.you tube has great video's

 

[TrainingWheels]

Tripps HD quoted me last Friday, $264 for 10" bars. $40 for extension wiring. $380 Labor. They are also running a 20% off special in February for parts and labor for Handle Bars I had this setup on my 2015 Ultra Classic and loved them.

 

[Colleydog]

On my Tri I put khromewerks 2 + 2 narrow sweepers, bars cost a little over a 100 dollars ran wires external and didnt buy anything but bars. On my ultra limited I had KST mayhem 12” bars installed by KST in Daytona for 650.00 dollars

 

[JohnK]

Just recently brought my new '20 TriGlide home, had Krome Works 2+2 wide sweepers installed by dealer - $850

 

[Fearless]

Just recently brought my new '20 TriGlide home, had Krome Works 2+2 wide sweepers installed by dealer - $850

I really like the straighter grip on my bars I feel sure that you will also :good: To answer your question about cost of changing bars In 2014 I did it myself for less $170 bars and clutch cable with a few new tools total $225 and a harley Triglide manual I didn't need for that job. I needed the shop manual when I returned to the dealer and through a fit about just taking my money, they knew why I wanted the manual. One of the owner's handed me a used 09' shop manual and gave it to me. The wide sweepers were a great help to me and my smashed up wrist the straighter angle of the grips have really worked out.

 

[Sawmill]

do it yourself. i did my 2009 t/g with paul yaffe 12" pullbacks.you tube has great video's

Did the stock cables and wires work with the 12", or did you have to buy new cables and extensions?

 

[rhino 2]

Did the stock cables and wires work with the 12", or did you have to buy new cables and extensions?

Chad.............Welcome to Trik-Talk........:clapping:....

 

[GARYD]

Tripps HD quoted me last Friday, $264 for 10" bars. $40 for extension wiring. $380 Labor. They are also running a 20% off special in February for parts and labor for Handle Bars I had this setup on my 2015 Ultra Classic and loved them.

I would go for that, but my dealer wants over $1000 for installation alone. Not going to happen.

 

[arnie]

I would go for that, but my dealer wants over $1000 for installation alone. Not going to happen.

Gary, how far are you from Rock Falls? Workman's h-D is much less if the distance isn't a problem.

 

[GARYD]

Gary, how far are you from Rock Falls? Workman's h-D is much less if the distance isn't a problem.

About 100 miles