Cam my stock 2020 TriGlide?

[BKtrike]

My air cleaner is the only Screaming Eagle part that I used. Cam is a Woods WM8-22x. My dealer stopped selling Harleys on Oct 1st so they are a lot more leeway in parts they can sell and use. My extended warranty ends in a month, so it isn't a concern going forward. Trike has 53k miles on it with the pistons and cylinders replaced in August at 48.5k miles. Kind of decided that this may be my last trike/motorcycle, so I want to do some fun things to it. New handlebars and a mechanical reverse are in the plans.

go for it! Enjoy the mods!

 

[Bruhow]

I put an S&S 465c kit in my Triglide with K&N air cleaner, Rinehart mufflers and no cat headpipe. Feels like a totally different trike. Lots more power and runs cooler.

 

[PosseRider]

Leaving my 20 ,pretty much stock. Going to have cat removed, return the stock slip-ons, & get rid of the CVO pipes. (prob end up on the shelf for 20 yrs. Have been happy with the 114 in the 20. Just reducing the heat & going catless.

 

[Trampas]

Leaving my 20 ,pretty much stock. Going to have cat removed, return the stock slip-ons, & get rid of the CVO pipes. (prob end up on the shelf for 20 yrs. Have been happy with the 114 in the 20. Just reducing the heat & going catless.

If you plan on selling them I would be interested

All for now Trampas

 

[PosseRider]

If you plan on selling them I would be interested

All for now Trampas

send me email addy.

 

[Trampas]

I'm not a member so can't send you email so I guess I will pass on the mufflers

All for now Trampas

 

[molokaimike]

I've been away for a while and this may have been already covered. I'm looking for a torque cam for my 2020 TG. I'd like to perk up the lower end grunt and wake up the 114. I'm not looking for high end speed but I want to increase the low end performance. Mine is a stock 114 except for a gutted stock head pipe with V&H slip-ons. I'd like to change out the air cleaner and add a tuner along with the cam. I know I'm opening a can of worms by asking but what does the group think would be the best cam for what I want to do.

 

[NHBAGGER]

Take a look at the CR480, TTS150, Star 30-30, RS468. All pretty popular.

 

[Mykneesbehurtin]

The S&S 465 work fantastic in my 107. Torque at 2200 rpm is already over 100 ft lbs.