RG3- Need to change rear wheel offset or add wheel stud leng

[agapsdiver]

RG3- Need to change rear wheel offset or add wheel stud length.

Wheels are the RG3 18x7.00J

Need to either get new wheels with 1.5 in. more negative offset (to push tire out further)

or add 1.5 in. to wheel studs and install 1.5" spacer to move tire out.

Any suggestions would be appreciated.

Where to acquire parts greatly appreciated.

 

[Papa Zook]

What's your purpose for doing this?

 

[agapsdiver]

What's your purpose for doing this?

To fit inside fenders after body work.

 

[ROAD DOG]

RG3- Need to change rear wheel offset or add wheel stud length.

Wheels are the RG3 18x7.00J

Need to either get new wheels with 1.5 in. more negative offset (to push tire out further)

or add 1.5 in. to wheel studs and install 1.5" spacer to move tire out.

Any suggestions would be appreciated.

Where to acquire parts greatly appreciated.

I have a bought a few sets of wheel spacers on eBay, they bolt on to your studs & have studs that bolt to your wheels. You need to know the bolt pattern & the diameter of the axle were the wheel goes over it.

 

[agapsdiver]

I have a bought a few sets of wheel spacers on eBay, they bolt on to your studs & have studs that bolt to your wheels. You need to know the bolt pattern & the diameter of the axle were the wheel goes over it.

Thanks.. found a pair for about $60. Try these out first before spending a couple thousand for wheels.