Originally Posted by
eagle1
installing performance machine stage 1 rear brake calipers pics,brake distribution line going from master cylinder to rear brakes. ( the dist. block should fit over the existing stud, but hole is too narrow. and the stud is the same heigth as the dist block so i has to make up a homemade clamp. i first put a larger nut over the stud to act as a thick washer, so when tightening down the bolt over the clamp , it would hold the dist box in place.no need to drill out the dist. box holebecause when you placed it over the existing stud there is not enought room to put a nut.
baker plus 5.5 oil pan rubs drive belt.IN HEINSIGHT SHOULD HAVE HAD A MOUNTING TAB WELDED TO THE P/M DIST BLOCK