I have just joined this forum and have a question. I ride a 2005 Gold Wing Roadsmith trike. I had it converted one year ago. I did not have the rake kit put on when they did the conversion. Although the steering was different for me, I eventually got accustomed to it and really didn't mind not having it raked. When it was time to replace the front tire, I had them install a new Mischlen Pilot Activ rear tire, which I understand is frequently done. At that time I noticed a very slight wobble in the front tire while going very slowly. I talked with the shop about this and I was told that it was normal for the hard compound tire. Well, one year later, I have a wobble (with my hands off the handlebars, which I do only for a second or two to check the stability)in the handle bars at speeds between 30 and 45 m.p.h. after which is steadys out.
My question is, do I need new steering head bearings, and if so, should I change the front tire, as it has become slightly cupped, or can I just reverse the tire after the bearings have been installed. Thanks for your suggestions, Pastor Bill
My question is, do I need new steering head bearings, and if so, should I change the front tire, as it has become slightly cupped, or can I just reverse the tire after the bearings have been installed. Thanks for your suggestions, Pastor Bill