Kingpin motor trike not level

[madeirajoe]

First post, need help. The right rear side is 1.5 inch lower than the left. Looks terrible Tried washers as suggested by dealer but made no difference . Tried adjusting coil over shock but it seems not to make a difference whatsoever . All suggestions welcome ..... Thanks

 

[FuzzyWuzHe]

Welcome to the gang, I'm not familiar with your trike, but I'm sure someone will chime in soon.

 

[Papa Zook]

First post, need help. The right rear side is 1.5 inch lower than the left. Looks terrible Tried washers as suggested by dealer but made no difference . Tried adjusting coil over shock but it seems not to make a difference whatsoever . All suggestions welcome ..... Thanks

How long has your trike been built? Has it always been this way?

 

[87Trike1200]

I am looking for similar answers for my 2012 MT Pheonix IRS conversion. R/H side about 1" lower than left. Checked with the installer (a knowledgeable and respected guy) and so far, no answers. Post if you get a clue and I'll do the same. I'm compensating a little by adding a couple lbs extra air in right rear tire... :Shrug: So far, it doesn't seem to be "hurting" anything, just annoying knowing it's that way...

 

[madeirajoe]

How long has your trike been built? Has it always been this way?

since i got it 5 months!!!

- - - Updated - - -

I am looking for similar answers for my 2012 MT Pheonix IRS conversion. R/H side about 1" lower than left. Checked with the installer (a knowledgeable and respected guy) and so far, no answers. Post if you get a clue and I'll do the same. I'm compensating a little by adding a couple lbs extra air in right rear tire... :Shrug: So far, it doesn't seem to be "hurting" anything, just annoying knowing it's that way...

Will do.. you do the same...thanks

 

[FuzzyWuzHe]

since i got it 5 months!!!

I'd be talking to the installer ... should be under warranty I would think.

 

[rhino 2]

Funny i HAD the same problem out the door with my 11T/G.. My dealer removed the body realigned the mounting bolts/holes while i waited.. About an hour.

 

[madeirajoe]

Funny i HAD the same problem out the door with my 11T/G.. My dealer removed the body realigned the mounting bolts/holes while i waited.. About an hour.

i have removed the body once but can't see and easy adjustments except maybe problem with the shocks....my trike is a Victory Kingpin 2012 on a MT kit...

 

[madeirajoe]

Does anyone know what replacement coil over shocks and air shocks i could use for this trike.. Motor Trike Victory Kingpin..I want to replace them all ....Thanks