Yesterday I went riding for a while (50F), since it was my first ride of any length for a while-I decided to put Ride On in the tires. I have had it for months, first chance to put it in and ride a bit.
Installation is fairly simple, I put the trike in the air about 6 inches, and removed all of the valve stems. Interesting stuff this is, fairly odorless, and don't taste bad either! Strong pressure must be applied to push it thru the small tube that goes over the valve stem ( at one point it blew off, thats when I got to taste test it). It has the consistency of a booger, the kind that you try to flick off your finger , and it just stays on!
Buttoned everything back up, put air back in and I was off to the races! The first 5 miles of riding were full of head shake and wobble, as the RO spread inside the tires (havent experienced anything like it -since I was hangin out with Bertha). It took about 10 miles for it to smooth out.
In summary the only recommendation would be to warm it up, so it does not require a lot of pressure to exit the bottle- I thought of this of course after the fact! Installation time is about an hour. :wave4:
Installation is fairly simple, I put the trike in the air about 6 inches, and removed all of the valve stems. Interesting stuff this is, fairly odorless, and don't taste bad either! Strong pressure must be applied to push it thru the small tube that goes over the valve stem ( at one point it blew off, thats when I got to taste test it). It has the consistency of a booger, the kind that you try to flick off your finger , and it just stays on!
Buttoned everything back up, put air back in and I was off to the races! The first 5 miles of riding were full of head shake and wobble, as the RO spread inside the tires (havent experienced anything like it -since I was hangin out with Bertha). It took about 10 miles for it to smooth out.
In summary the only recommendation would be to warm it up, so it does not require a lot of pressure to exit the bottle- I thought of this of course after the fact! Installation time is about an hour. :wave4:
Last edited: