Road King front fender

[RoadKingTrike]

After I installed the 6° rake kit on my RK/MotorTrike conversion, the steering was just as I had hoped. BUT....now my FL-style front fender is tilted up in the front and the bottom edge no longer level with the ground (no surprise there, right?). It looks unsightly to me, and I really want to return it to its level position or change to a different fender. Have any of you been inclined to address this situation on your FL conversion ? Suggestion, please.
Respects

 

[clint44]

On my custom bagger Road King,I went with one of these:
https://www.nativecustombaggers.com/index.php/body-parts/front-fenders/fender-lowering-kit.html

 

[RoadKingTrike]

On my custom bagger Road King,I went with one of these:
https://www.nativecustombaggers.com/...ering-kit.html

Thanks for the reply. I've been off the grid (under the weather) so sorry it took so long to say thanks.
I will call Native Customs with some questions. Thanks again.
respects,

 

[Bo and Doc]

Years ago I put a FatBoy front fender on my Road Glide. It looks cool, streamlines the front end a bit, and the angle won't matter.

 

[bronxbill]

I put a Fatboy fender on an Ultra a few years ago also. Looks good and there are no angle problems. You will have to buy spacers to make it fir correctly between the forks

- - - Updated - - -

I put a Fatboy fender on an Ultra a few years ago also. Looks good and there are no angle problems. You will have to buy spacers to make it fit correctly between the forks