I have a 2017 Roadsmith on a 2003 Goldwing
CvV boots are torn
Can’t get the axle nuts loose.
Using 36mm socket and 3/4” breaker bar
And extra leverage. Also tried electrical impact gun.
I have the cotter pin removed already
And the brake caliper is off.
I have done many trucks and cars
Never ran into one this tight before.
Any advice is most appreciated
Thanks Jim
CvV boots are torn
Can’t get the axle nuts loose.
Using 36mm socket and 3/4” breaker bar
And extra leverage. Also tried electrical impact gun.
I have the cotter pin removed already
And the brake caliper is off.
I have done many trucks and cars
Never ran into one this tight before.
Any advice is most appreciated
Thanks Jim